Cleanmate S 930 Robotic Vacuum Cleaner User Manual

Cleanmate S 930 Robotic Vacuum Cleaner User Manual

Safety Instructions

Before using this product, please read the safety instructions and follow all regular safety precautions. Warranty service is not applicable to any damage caused by violation of instructions. S 930 cleaning robot is a sophisticated product which is restricted for indoor cleaning only. DO NOT use the robot for non-cleaning purpose. Please refer to user manual.

Warning Sign

Graphic and Sign explanation
1. Possible Severe injuries: Blindness, Burns, Electricity Injury, Fracture, Poisoning and other severe injuries that leave sequela and lead to long-term hospitalization.
2. Possible Injuries: Burns, and electricity wound that does not require hospitalization.
*3. Possible Property Damage : Damage to furniture, valuable objects and injuries to pets.

Warning
When the appliance is to be used by a child, the child must be of 8 years old and above. It is recommended for first time users to keep sight of the appliance during vacuuming to ensure safe operation. For persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, proper supervision or instruction should be given concerning use of the appliance in a safe way to help them understand the hazards involved. Children should not play with appliance. Cleaning and maintenance should not be made by children without supervision.

Safety Instructions of Product, Charging dock, virtual wall, power adapter and other accessories.

Warning

Notice

Do not touch the power cord, plug or adapter with wet hands. Otherwise, it may cause electric shock.

Safety Instructions

Charging Notice

Danger

Attention

Warning
As a safety measure, the Clanmate robot comes with the power switch set to 0 (off). Make sure to turn it to the on position (1) before charging. See page 9 for the placement of the power switch.

It’s not allowed to copy, publish or record this user manual and related material in any searchable media or translate to any other languages without our written authorization.

We have made our best efforts to make sure the precision and completeness of this user manual. If there are any mistakes or omissions found, we sincerely thank you for giving us feedback through your local retailer.

Product Feature

Clanmate S 930 is an automatic cleaning robot, it has a common sweeping function, double side brush, strong vacuum power and also a rolling brush kit. It can determine how best to work in order to make it more efficient in cleaning the floor.

User Friendly Design

Operation is simplified, touch the on the robot, to activate the robot.

Washable Dust Bin

Dust bin and primary mesh filter can be washed with water. Do not wash the HEPA-filter. Simply wash the dust bin under water after use to avoid dust blowing in the air and cause a second pollution.

Product Components

Main Body and Accessories

Main Body Diagram

Dust Bin

Rolling Brush Kit

Charging Docking

Remote Control

1. LED display

2. HOME: Auto-recharging

3. Direction Buttons: control robot move to certain direction.
   (Only works when robot in standby status)

4. Max: robot change to powerful cleaning mode.
   (Only works when robot in standby status)

5. CLK: robot timer setting

6. PLAN: robot schedule cleaning time setting

7. ON/OFF: turn on/off the robot

8. Mode: robot cleaning modes
   (Only works when robot is in standby status)

Note:

• A. Please install AAA type batteries into the remote control before use it.
• B. Remove the batteries if the remote control will be left unused for a long period.
• C. If you use the remote control near the charging docking, the robot may not recognize the command and may not respond.

Product Operation

Touch Panel Operation

1. Cleaning Operation
   A. Press to start the robot, and press again to enter auto cleaning mode.
   B. Make the robot change from Sleeping status to Standby; or press over 3 second make the robot change from Standby to Sleeping status.
   C. In Schedule cleaning process, press this to confirm the schedule setting.
   D. In time setting process, press it to confirm the time setting.
   E. In Standby status, press this to start the robot.

2. “HOME” auto-charging/ number increase (+) operation
   A. In Schedule setting process, press this to make the setting time increase or system time number increase; when you keep pressing this button, the number will increase automatically.
   B. When robot in other mode, press this to make the robot start looking for auto-charging docking.

3.  “PLAN” schedule setting operation
   In Standby or Charging status, press this to Enter/Quit System Time Setting process; press this over 5 second to Enter/Quit Schedule Setting

4. “PLAN” + “HOME” operation In Standby, press “PLAN”+”HOME” together at the same time to Mute / Unmute voice notifications.

Battery Charging

1. Battery Charging
   Place charging station against the wall, and remove obstacles about 1m at two sides and 2m in front of the station as show in the right figure.
   Note: If the robot is powered off, then switch on the robot first before charging.
   2. Charge the robot in either way as shown below:
   A. Plug one end of the adapter into the robot and the other end into the power socket as shown in Fig a.
   B. Press “HOME” button on remote control or robot to make the robot search for the charging station and dock automatically as shown in Fig b

Note:

• A. When the robot is charging, the LED panel will gradually show “1111” from left to right.
• B. When charging is done, LED panel will show “FULL”
• C. In standby status, the robot will broadcast voice “Please Charge” when battery level is low.
• D. In working status, the robot will start searching for the charging station automatically when battery level is low.

In Order to Extend Battery’s Life:

• A. Please charge the robot up to 12 hours before first use.
• B. Charge the robot as soon as possible when battery capacity is low
• C. The robot will return to the charging docking automatically when accomplish cleaning or battery capacity is low.
• D. When you will not use the robot for some time, please fully charge the battery first, then switch off the robot and keep it in a cool but dry place.
• E. If the robot has been put aside over 3 months, please charge the robot for 12 hours first before use it for cleaning.

Starting Up/ Standby/ Sleeping

1. Starting Up
   A. Switch on the robot by turn on the switch button on the right side of the robot, see page 9 for location of the power switch.
   B. In Standby status, press on robot or “ON/OFF” on the remote control to start the robot.
   Note: If the robot is in Sleeping status, press on robot or “ON/OFF” on remote control to wake up the robot first, then press again to make robot start up cleaning.

2. Standby
   Standby means the robot is power on, waiting for users operation. Could be achieved by:
   A. When robot in working status, press on robot o standby status.

3. Sleep
   When robot in Sleep status, press on robot or “ON/OFF” on remote control to wake up the robot. To make robot enter Sleep Status by following ways could maximize battery’s life:
   A. in Standby status, keep pressing on robot over
   B. in Standby status, if the robot is connected to the APP and left for 10 minutes without any commands, the robot will enter Sleep status automatically.
   C. in Standby status, if the robot isn´t connected to the APP and left for 2 minutes without any commands, the robot will enter Sleep status automatically.

Schedule

You can schedule the robot to make it start cleaning automatically at a certain time every day.

1. Make schedule setting by LED display on robot body
   A. robot system time setting (make sure the robot in Standby or Power on status)
   a. Press “PLAN” on robot body to enter robot system setting, LED display will show current time set.
   b. the left two number on LED panel will flash. Press “HOME” on robot to increase hour number one by one till the number you want to set. When you keep press “HOME” on robot, the number will continuous increase automatically till you release it.
   c. Press to confirm the hour number setting and enter into minute setting, right side two number will flashing, press “HOME” to increase the number till you get the number want to set. If you keep press “HOME” on robot, the number will continuous increase automatically till you release it.
   d. Press to save the setting, and press “PLAN” to quit the setting. (If you not press to save the setting but press “PLAN” directly to quit the setting, it will quit without save the setting).
   B. Schedule Time Setting (make sure the robot in Standby or Power On status)
   a. Keep press “PLAN” over 5 second to enter robot schedule setting, the left two number on LED display panel will flashing.
   b. Press “HOME” on robot to increase the number till you find the one you want to set.
   c. Press to confirm the hour setting and enter minutes setting, right side two number will flashing, press “HOME” to increase the number till you find the one want to set. Please note: when you keep pressing “HOME”, the number will increase continues automatically till you release it.
   d. Press to save previous step setting, then press “PLAN” to quit schedule setting. (If you not save the setting before you press “PLAN” to quit schedule setting, robot would not save this data setting)
   C. Cancel Schedule Setting
   Set the schedule time to be “00:00”
   Note:
   a. Schedule setting by robot body is based on the robot system time. So you need to set the robot system time to be correct first, after that you could set the schedule time.
   b. once schedule cleaning time setting was confirmed, robot will clean automatically every day at the schedule time. When switch off the robot, the schedule would be cancelled, if need the robot work schedule, need to make schedule setting again.

2. Make Schedule Setting by Remote Control
   A. Schedule time setting
   a. Make sure robot is in standby or charging status, press and hold “PLAN” on remote control over 5 second, remote control will enter schedule setting;
   b. Left two number on remote control LCD panel will flashing, press direction keys on remote control to change the number till you find the time would like to set.
   c. When you find the time you could like to set, make the remote control point to the robot, and then press “ON/OFF” key on remote control to confirm the setting. When setting success, the LED display panel on robot body will show the schedule time.
   Note:
   Schedule setting time by remote control is the delay time after current robot system time. E.g: robot current system time is 8:00 am, time on remote control number Is: 01:30, this means robot will start work at 9:30am and set this time 9:30am every day as the schedule time
   B. Cancel Schedule Setting
   When remote control in schedule setting status, press again “ON/OFF” key on remote control. (If robot display 00:00 on robot body that means schedule was cancelled, if not, press again “ON/OFF” to cancel the setting.)
   Note:
   A. in time setting process, press “ON/OFF” key on remote control to confirm the hour and minutes setting. Press “PLAN” on remote control to enter or quit time setting.
   B. “ON/OFF” on remote control is the same function as on robot body.

3. Set up scheduling via the Clanmate app
   Scheduling can also be set in the Clanmate app. There you can set a weekly schedule and choose any time on any weekday. The scheduled time will continue until you delete it in the app.

Cleaning Modes

Clanmate S 930 have 4 different cleaning modes to meet different cleaning request.

1. Automatic Cleaning Mode
   In standby status, press on robot body or press “ON/OFF” on remote control, robot will enter automatic cleaning mode.

2. You can also select the cleaning mode when the robot is cleaning, press the MODE button on remote control to select the cleaning mode, the mode type will appear on the robot’s 4 Digits LED Display as follow:
   A. 1111: Spot Cleaning Mode
   B. 2222: Zig-Zag Cleaning Mode
   C. 3333: Random Cleaning Mode
   D. 4444: Spot x 2 Cleaning Mode

3. Schedule Cleaning You can set the schedule cleaning time according to your personal request.

4. MAX-cleaning Press “MAX” on the remote control to start a powerful cleaning mode, The Cleanmate increases the vacuum power. and increases the rolling brush RPM.

Product Operation

Rolling brush kit, dust bin kit should be well installed (refer to below diagram)

Product Maintenance

Cleaning Side Brush

1. Check if side brush is broken or something is stuck
2. Remove the side brushes from the robot and clean in varm water
3. If side brush is curly or deform, put them in hot water for 5 seconds
4. If side brush is worn out then please change

Cleaning Dust Bin and Filters

Empty and clean the dust bin before or after every cleaning session. Follow the cleaning steps as below.

Note:

• a. Wash the primary filter after every cleaning session, at least 15-30 days to maximize its use life.
• b. Before installing the primary filter make sure is is dry.
• c. HEPA filter should be replaced if it has lost its shape or no longer fit tight against the filter frame.
• d. Recommended changing intervals for the HEPA filter:
  i. Once per month if the robot is vacuuming seven days a week
  ii. Every other month if it is used 3-4 days per week
  iii. Every four months if used less than once per week. New filters can be bought at www.cleanmate.se or at your local retailer.

Cleaning Sensors and Wheels

Use cleaning tools or a soft micro fiber to wipe the sensors and wheels as below:

Cleaning Charging Poles

Use a soft micro fiber cloth to wipe the charging poles of charging docking and robot:

Cleaning Rolling Brush Kit

Remove the rolling brush cover frame from the robot, remove the rolling brush, clean the rolling brush and cover frame with a soft micro fiber cloth, cut loose any tangled hair or fibbers.

Product Specification

Battery

1. Remove the screws on battery cover with a screw driver.
2. Remove the battery cover.
3. Unplug the wire connector that links the battery and robot.
4. Install battery inside the battery house, make sure the side printed words upside
5. Connect the cable of battery and robot
6. Tidy the cables and connection
7. Put the battery inside the battery house
8. Lock the battery cover screw

Note: Only use the original battery of the product, otherwise it may cause product damage.

Usage of Magnetic Strip

Function of Magnetic strip
There is magnetic sensor inside the robot, when it detects that there is a magnet, the robot will automatically change direction or turn back. The magnetic strip will let you decide where your robot can go and where it should “keep out”. During cleaning, simply place the magnetic strip in doorways, around pet bowls, cords, or anywhere you don’t want the robot to go. For example, stick the magnetic strip in front of the washing room.

Trouble Shooting

Note: If above solution does not work, please try as below:

1. Switch off the robot and restart.
2. If re-start robot not works, contact your retailer or Cleanmate – www.cleanmate.se

Cleanmate

Customer support & Warranty

Do you have questions regarding your Cleanmate product? Please contact us at www.cleanmate.se

For service & warranty issues Visit www.cleanmate.se, fill out the warranty form under the tab “Service” and your info & issue will be sent to our customer support.
Welcome!

Documents / Resources

| Cleanmate S 930 Robotic Vacuum Cleaner [pdf] User Manual
S 930, Robotic Vacuum Cleaner, S 930 Robotic Vacuum Cleaner
---|---

References

• clothes.No
• Sveriges Populäraste Robotdammsugare - Cleanmate.se

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>