Nedlands Group CD10W-CC LED Can Downlight Instruction Manual
- October 30, 2023
- Nedlands Group
Table of Contents
**Nedlands Group CD10W-CC LED Can Downlight Instruction Manual
**
Important Safety Instructions
Basic safety precautions should always be followed when installing, including the following:
- Read all instructions.
- Licensed electrician for installation only.
- Always ensure the power is OFF and the fitting has cooled down before performing any maintenance, cleaning, changing the globe or adjustment to the fitting.
- Do not install any luminaire near the heat source.
- Do not exceed the nominal supply voltage or amperage ratings.
- To avoid injury or damage to the fitting, please ensure that power leads and screws are secure before connecting the power
Installation Procedure
WARNING
- Switch off before installation.
- Switch on only after complete installation and examination of the circuit.
- Professional electrician for installation and maintenance only
Turn Off power supply before starting any installation. Read instructions & check you have all the tools & accessories to complete the installation correctly.
Can Downlight with internal driver
STEP 1 Take out the lamp and accessory pack.
STEP 2 Loosen the screws on surface mounted frame.
STEP 3 Knock the anchor into the ceiling according to the hole distance.
STEP 4 Fix the frame by screws
STEP 5 Fix the “L””N””G” into the terminal block.
STEP 6 Screw back the lamp to the frame according to step 2, adjust the
lighting direction
Warning: Production modification and improper installation are not valid for warranty.
1800 909 306
nedlandsgroup.com.au
Sales@nedlandsgroup.com.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>