Skullcandy Indy True Wireless Earbuds User Guide
- June 13, 2024
- Skullcandy
Table of Contents
Skullcandy Indy True Wireless Earbuds
Power
Auto Power – On
Auto Power – Off
Charge Case
Charge Earbuds
Pairing Mode
Pair New Device “Indy”
Power-On Right Side 01
Power-Off Right Side 01
Play/Pause 11 Right Side 01
Track Forward Right Side 01
Track Back Left Side 02
Volume Up Right Side 01
Volume Down Left Side 02
Answer/End Right Side 01
Activate Voice Assistant
Right Side 01 or Left Side 02
Clear Paired Device
Right Side 01 /Left Side 02 Disconnected Mode
Questions Visit : www.skullcandy.com
FEATURES
Speaker Driver: 6mm, Impedance: 16 Ohms, THD <3%@1 KHz, Voltage Regulation: 5V, 500mA, Bluetootr® 5.0, Frequency Band: 2402MHz -2480MHz, Maximum Power: <9dBm. Weight: 59.Sg
Skullcandy, and other marks are registered trademarl<s of Skullcandy, Inc. All
rights reserved
Maximum operating temperature 45″C
FCC Compliance Statemen
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
ISED Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions: (1 )This device
may not cause interference.(2)This device must accept any interference,
including interference that may cause undesired operation of the device
ISED SAR Compliance Statement
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. End user must follow the specific operating
instructions for satisfying RF exposure compliance. This transmitter must not
be co-located or operating in conjunction with any other antenna or
transmitter.
The portable device is designed to meet the requirements for exposure to radio
waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg
averaged over one gram of tissue. The highest SAR value reported under this
standard during product certification for use when properly worn on the body.
Americas Skullcandy, Inc. 6301 N Landmark Dr. Park City. U T 84098 U.S.A
Skullcandy.com
Canada Skullcandy Canada ULC 329 Railway St. Unit 205 Vancouver, BC. V6A 1A4
Canada
Skullcandy.ca
Europe Skullcandy Europe BV Postbus 425 5500AK Veldhoven Nederland
Skullcandy.eu
Contains Li-ion battery. Battery must be recycled or disposed of properly
Made in China
R-C-Sku-S2SSW
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>