NITECORE HA13 Multipurpose Dual Beam AAA Headlamp User Manual
- June 13, 2024
- Nitecore
Table of Contents
NITECORE HA13 Multipurpose Dual Beam AAA Headlamp
Product Information
| Product Name | HA13 Multipurpose Dual Beam AAA Headlamp |
|---|---|
| Features | Multipurpose headlamp with white and red light modes, special |
SOS and beacon modes, adjustable headband, compact dimensions,
lightweight design
Accessories| Headband, 3 x AAA Batteries
Specifications| Dimensions: 59mm x 50mm x 36mm (2.32 x 1.97 x 1.42) (Bracket
Included)
Weight: 67g (2.36 oz) (Bracket and Headband Included) 100g (3.53
oz) (Bracket, Headband and 3 x Batteries Included)
Battery Options:
- NITECORE HLB1300 Rechargeable Li-ion Battery Pack
- Primary Alkaline Battery
- Primary Lithium Battery
- Rechargeable Ni-MH Battery
- Rechargeable LFP Battery
- Rechargeable Li-ion Battery
Product Usage Instructions
Battery Installation / Removal
As illustrated, insert / remove the AAA batteries after opening the battery compartment. Warnings:
- Ensure the batteries are inserted according to the polarity marks. The product will not work if the batteries are incorrectly inserted.
- When the product is kept in a backpack or left unused for prolonged time, please remove the batteries to prevent accidental activation or battery leakage.
Power Button / MODE Button
- On / Off: Use the power button to turn the headlamp on or off.
- White Light: When the headlamp is on, short press the MODE button to switch between white light and red light.
- Special Modes (SOS / BEACON): When the headlamp is on, long press the MODE button to activate special SOS or beacon modes.
- Lockout / Unlock: To prevent accidental activation, press and hold both the power button and MODE button simultaneously for 3 seconds to lock or unlock the headlamp.
Battery Replacement
The batteries should be replaced when the output appears to be dim or the headlamp becomes unresponsive due to low power.
Warnings
- CAUTION! Possible dangerous radiation! Don’t look into the light! May be dangerous for your eyes.
- DO NOT disassemble or modify the headlamp as doing so will cause damage to it and render the product warranty invalid. Please refer to the warranty section in the manual for complete warranty information.
- Dispose of the device/batteries in accordance with applicable local laws and regulations.
HA13
Multipurpose
Dual Beam AAA Headlamp
- Dual Power Sources
- White Light + Red Light
- 350 Lumens Max Output
Features
- Max output of 350 lumens
- Red light illumination designed for preserving night vision
- Utilizes an optical lens system with various facets
- Compatible with various AAA batteries such as alkaline, Ni-MH, and primary lithium batteries
- Designed with two buttons different in shape and touch, offering easy one-handed operation
- 3 brightness levels, 2 light sources, and 3 special modes available
- Made from special PC plastic with impact and low temperature resistance
- Compact and lightweight
- Impact resistant to 1 meter
- Waterproof rating in accordance with IPX6
Accessories
- Headband, 3 x AAA Batteries
Specifications
- Dimensions: 59mm x 50mm x 36mm (2.32″ x 1.97″ x 1.42″) (Bracket Included)
- Weight: 67g (2.36 oz) (Bracket and Headband Included) 100g (3.53 oz) (Bracket, Headband and 3 x Batteries Included)
Battery Options
| Type | Nominal Voltage | Compatibility | |
|---|---|---|---|
| NITECORE HLB1300 Rechargeable Li-ion Battery Pack | — | 3.7V | Y (Recommended) |
| Primary Alkaline Battery | AAA | 1.5V | Y (Recommended) |
| Primary Lithium Battery | AAA | 1.5V | Y (Recommended) |
| Rechargeable Ni-MH Battery | AAA | 1.2V | Y (Recommended) |
| Rechargeable LFP Battery | 10400 | 3.2V | N (Incompatible) |
| Rechargeable Li-ion Battery | 10400 | 3.7V | N (Incompatible) |
Technical Data
Using 3 x AAA Batteries:
| White Light | Red Light | |
|---|---|---|
| HIGH | LOW | ULTRALOW |
Brightness
| 350
Lumens
| 100
Lumens
| 6
Lumens
| 350
Lumens
| 350
Lumens
| 5
Lumens
| 5
Lumens
Runtime| 3h| 12h| 140h| ─| ─| 40h| ─
Beam Distance| 120m| 70m| 15m| ─| ─| 3m| ─
Peak Beam Intensity| 3,500cd| 1,250cd| 60cd| ─| ─| 2cd| ─
Impact Resistance| 1m
Water Resistance| IPX6
Note: The stated data is measured using 3 x 1.5V alkaline AAA batteries under laboratory conditions. The data may vary in real world use due to different battery usage or environmental conditions.
Using the HLB1300 Li-ion Battery Pack:
| White Light | Red Light | |
|---|---|---|
| HIGH | LOW | ULTRALOW |
Brightness
| 350
Lumens
| 100
Lumens
| 6
Lumens
| 350
Lumens
| 350
Lumens
| 5
Lumens
| 5
Lumens
Runtime| 4h 30min| 15h| 160h| ─| ─| 60h| ─
Beam Distance| 120m| 70m| 15m| ─| ─| 3m| ─
Peak Beam Intensity| 3,500cd| 1,250cd| 60cd| ─| ─| 2cd| ─
Impact Resistance| 1m
Water Resistance| IPX6
Note: The stated data is measured using the HLB1300 Li-ion Battery Pack (1,300mAh) under laboratory conditions. The data may vary in real world use due to different battery usage or environmental conditions.
Battery Installation / Removal
Power Button / MODE Button
As illustrated, insert / remove the AAA batteries after opening the battery
compartment.
Warnings:
- Ensure the batteries are inserted according to the polarity marks. The product will not work if the batteries are incorrectly inserted.
- When the product is kept in a backpack or left unused for prolonged time, please remove the batteries to prevent accidental activation or battery leakage.
Power Button / MODE Button
- The Power Button is used for turning on / off the light and adjusting brightness levels.
- The MODE Button is designed for switching light sources.
On / Off
- When the light is off, long press the Power Button for 1 second to access LOW.
- When the light is on, long press the Power Button or MODE Button for 1 second to turn it off.
White Light
- When the light is off, long press the Power Button for 1 second to access LOW.
- When the light is off, double press the Power Button to access ULTRALOW.
- When the light is on, short press the Power Button to switch between LOW and HIGH.
Note: The HIGH Level will step down to prevent overheating and prolong battery life when it runs for a prolonged period.
Red Light
- When the light is off, long press the MODE Button for 1 second to turn on the red light.
- When the red light is on, short press the Power Button to switch between CONSTANT-ON and SLOW FLASHING.
Light Sources Switching
When the light is on, short press the MODE Button to switch between white
light and red light.
Special Modes (SOS / BEACON)
- When the headlamp is in any status, double press the MODE Button to access SOS.
- When either special mode is on, short press the Power Button to switch between SOS and BEACON. Double press the MODE Button again to return to the previous status.
Lockout / Unlock
- When the headlamp is off, long press both buttons for 2 seconds until the light flashes 3 times to indicate access to the Lockout Mode. In Lockout Mode, any brightness levels or special modes are unavailable, and the light will flash once to indicate this status when pressing either button.
- When in the Lockout Mode, long press both buttons for 2 seconds again until the ULTRALOW is on to indicate the unlock status.
Battery Replacement
The batteries should be replaced when the output appears to be dim or the
headlamp becomes unresponsive due to low power.
Warnings
- CAUTION! Possible dangerous radiation! Don’t look into the light! May be dangerous for your eyes.
- DO NOT disassemble or modify the headlamp as doing so will cause damage to it and render the product warranty invalid. Please refer to the warranty section in the manual for complete warranty information.
- Dispose of the device/batteries in accordance with applicable local laws and regulations.
SYSMAX Innovations Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address: Unit 6355, 5/F,
No. 1021 Gaopu Road,
Tianhe District, Guangzhou,
510653, Guangdong, ChinaPlease find us on facebook : NITECORE Flashlight
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>