Hanwha Vision SHP-1563FPW In-Ceiling Mount Instruction Manual
- June 13, 2024
- Hanwha Vision
Table of Contents
Hanwha Vision SHP-1563FPW In-Ceiling Mount
Product Information
The product is an in-ceiling mount for cameras. It is available in two models: SHP-1563FPW and SHP-1563FW.
Installation Precautions
- Ensure that the installation place can endure at least 4 times the total weight of the installation structure.
- There should be at least 250mm or more of spare height above the ceiling board.
- Secure the safety wire to prevent the product from falling.
- Use the provided screws to install the mount and camera.
- The ceiling board must be able to sustain a weight of at least 10 kg.
Package Contents
- SHP-1563FW: Nut (N1), Nut (N2, N3), Anchor Bolt, Template, Safety Bracket (1EA), Safety Wire (1EA)
- SHP-1563FPW: Nut (N1), Nut (N2, N3), Anchor Bolt, Housing, Top Cover, Screw Cap (4EA)
Product Usage Instructions
Installing SHP-1563FW
- Follow the installation precautions mentioned above.
- Attach the nut (N1) and nuts (N2, N3) to the anchor bolt.
- Use the provided template to mark the installation points on the ceiling board.
- Fix the safety bracket (1EA) and safety wire (1EA) to the ceiling board using screws.
- Attach the housing and top cover to the mount.
- Secure the mount to the ceiling board using the anchor bolt.
- Use a TR20 screwdriver to tighten the screws.
Installing SHP-1563FPW
- Follow the installation precautions mentioned above.
- Attach the nut (N1) and nuts (N2, N3) to the anchor bolt.
- Use the provided template to mark the installation points on the ceiling board.
- Ensure that the conduit pipe has a diameter of 3/4 (M25) and is less than 15mm in length.
- Attach the housing and top cover to the mount.
- Secure the mount to the ceiling board using the anchor bolt.
- Tighten the screws using a TR20 screwdriver.
- Use a PT01-006013A screwdriver to tighten the screw caps (4EA).
Package
Installation Precautions
- Make sure that the installation place can endure at least 4 times of the total weight of the installation structure.
- At least 250mm or more of spare height is required above the CEILING BOARD.
- Be sure to secure the Safety Wire to avoid a product fall.
- Use the provided screws to install the Mount and camera.
- CEILING BOARD must be able to sustain the weight of at least 10 kg.
Installation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>