Hanwha Vision SBP-300WMW1 Smart Dome Camera Anti Vandal Camera Instruction Manual
- June 13, 2024
- Hanwha Vision
Table of Contents
Hanwha Vision SBP-300WMW1 Smart Dome Camera Anti Vandal Camera
Product Information
The Wall Mount Adaptor (SBP-300WM1 SBP-300WMW1) is a product designed to install the Smart Dome Camera and Anti Vandal Camera on a wall or vertical structure. It is compatible with various camera models and provides a secure mounting solution.
Installation Precautions
- Make sure that the installation place can endure at least 4 times the total weight of the Wall Mount Adaptor, Hanging Mount Adaptor, and Camera.
- This product is designed to use M10 Anchor Bolts (Nuts) for the installation.
- For a concrete wall, it is recommended to use M10 Anchor Bolts (Nuts) along with plain and spring washers.
- Each anchor bolt must be capable of withstanding an extraction force of 700 kg.
- When installing the product outdoors, use interlocking devices made of stainless steel.
Installation Instructions
- Pull out the external power cable, BNC cable, and a communications cable (for connecting to the camera) through the rear of the Wall Mount Adaptor into the Pipe.
- It is recommended to keep the cables at a distance of about 100 mm from the pipe to ensure proper cable management.
- Securely attach the Wall Mount Adaptor to the desired wall or vertical structure using M10 Anchor Bolts (Nuts) and appropriate washers.
- Ensure that each anchor bolt is tightened properly and capable of withstanding the required extraction force of 700 kg.
- Check that the Wall Mount Adaptor is securely mounted and stable.
- Connect the Smart Dome Camera or Anti Vandal Camera to the Wall Mount Adaptor using the appropriate mounting mechanism provided by the camera manufacturer.
- Ensure that all cables are properly connected and secured.
- Test the camera functionality and adjust the viewing angle as needed.
Package
Product Overview
This product is used to install the Smart Dome Camera and Anti Vandal Camera on a wall or vertical structure.
Installation Precautions
- Make sure that the installation place can endure at least 4 times the total weight of the Wall Mount Adaptor, Hanging Mount Adaptor, and Camera.
- This product is designed to use M10 Anchor Bolts (Nuts) for the installation.
- For a concrete wall, it is recommended to use M10 Anchor Bolts (Nuts) along with plain and spring washers.
- Each anchor bolt must be capable of withstanding an extraction force of 700 kg.
- When installing the product outdoors, use interlocking devices made of stainless steel.
Installation
- Pull out the external power cable, BNC cable, and communications cable (for connecting to the “camera”) through the rear of the Wall Mount Adaptor into the Pipe.
- Then, it is recommended to keep the cables at a distance of about 100 mm from the pipe.
- Secure the Wall Mount Adaptor to the wall using the “Anchor Bolts or Nuts (M10)”.
- When installing the product on a wall, mark and drill 4 holes into the Wall Mount Adaptor and insert the Anchor Bolts or Nuts (M10) before installation.
- Mount the Camera set on the Pipe.
- Install the camera according to the camera’s installation guide
Caution for water prevention
Documents / Resources
|
Hanwha Vision SBP-300WMW1 Smart Dome Camera Anti Vandal
Camera
[pdf] Instruction Manual
SBP-300WM1, SBP-300WMW1, SBP-300WMW1 Smart Dome Camera Anti Vandal Camera,
Smart Dome Camera Anti Vandal Camera, Anti Vandal Camera, Vandal Camera,
Camera
---|---
Read User Manual Online (PDF format)
Loading......