Hanwha Vision SBP-300LM Parapet Mount Adaptor User Manual
- June 13, 2024
- Hanwha Vision
Table of Contents
Hanwha Vision SBP-300LM Parapet Mount Adaptor
Product Information
- Product Name: SBP-300LM Parapet Mount Adaptor
- Colors Available: Ivory, White
- Package Contents: ARM, PLATE ASSY
Product Overview:
- This product is used to install the Smart Dome Camera and Anti Vandal Camera on a roof or vertical wall.
- Supports multiple languages: ENG, FRA, GER, SPA, ITA, RUS, POL, TUR, CZ, JAP, CHI, KOR
- Compatible with Smart Dome Camera and Anti Vandal Camera
Installation Precautions
- Make sure that the installation place can endure at least 4 times of the total weight of the Parapet Mount Adaptor, Hanging Mount Adaptor, and Camera.
- Use M10 Anchor Bolts (Nuts) for the installation.
- For concrete walls, it is recommended to use M10 Anchor Bolts (Nuts) along with plain and spring washers.
- Each anchor bolt must be capable of withstanding an extraction force of 700 kg.
- When installing the product outdoors, use interlocking devices made of stainless steel.
Product Usage Instructions
- Pull out the external power cable, BNC cable and communications cable (for connecting to the camera) through the rear of the Wall Mount Adaptor into the Pipe. It is recommended to keep the cables in a distance of about 100 mm from the pipe.
- Secure the Wall Mount Adaptor to the wall, corner or pole using the Anchor Bolts or Nuts (M10).
- If installing on a corner of the wall, use the Corner Mount Adaptor (SBP-300KM). For a pole, use the Pole Mount Adaptor (SBP-300PM).
- When installing on a wall, mark and drill 4 holes into the Wall Mount Adaptor and insert the Anchor Bolts or Nuts (M10) before installation.
- Mount the Camera set on the Pipe and install it according to the camera’s installation guide.
Package
Product Overview
This product is used to install the Smart Dome Camera and Anti Vandal Camera on a roof or vertical wall.
Installation Precautions
- Make sure that the installation place can endure at least 4 times of the total weight of the Parapet Mount Adaptor, Hanging Mount Adaptor, and Camera.
- This product is designed to use M10 Anchor Bolts (Nuts) for the installation.
- For a concrete wall, it is recommended to use M10 Anchor Bolts (Nuts) along with plain and spring washers.
- Each anchor bolt to use must be capable of withstanding an extraction force of 700 kg.
- When installing the product outdoors, use interlocking devices made of stainless steel.
Installation
- Pull out the external power cable, BNC cable and communications cable (for connecting to the “camera”) through the rear of the Wall Mount Adaptor into the Pipe.
- Then, it is recommended to keep the cables in a distance of about 100 mm from the pipe.
- Secure the Wall Mount Adaptor to the wall, corner or pole using the Anchor Bolts or Nuts (M10)”.
- When installing the product on a corner of the wall, use the Corner Mount Adaptor (SBP-300KM) and use the Pole Mount Adaptor (SBP-300PM) for a pole.
- When installing the product on a wall, mark and drill 4 holes into the Wall Mount Adaptor and insert the Anchor Bolts or Nuts (M10) before installation.
- Mount the Camera set on the Pipe.
- Install the camera according to the camera’s installation guide.
Product Specifications
- Weight : 730g
- Material : Aluminum
- Operation temp. : -50°C~60°C
- Operation hum. : 0~100%
Product Outline
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>