THE HOME DEPOT 20030T-2PK Table Lamp Set Instruction Manual
- June 13, 2024
- THE HOME DEPOT
Table of Contents
THE HOME DEPOT 20030T-2PK Table Lamp Set
Overview
Assembly Instruction
- Pull out the Power cord A gently until bottom of Socket assembly C reaches the top of Lamp base B.
- Rotate Socket assembly C counter-clockwise by two turns, then screw Socket assembly onto Lamp base B and tighten.
- Insert Harp F into Saddle D.
- Install E26 bulb E into socket.
- Attach Lamp shade G onto Harp F and tighten it with Finial H.
Product Specifications
Input voltage 120V
Rated power 150W MAX
Lamp socket E26
Cord Length 5ft.
Product Packaging
Lamp base assembly × 2
Lamp shade × 2
Harp & Finial × 2
Lamp manual × 1
Safety Warning
BULB TYPE:
Use only the bulb type and wattage indicated on Wattage Label placed on or
near socket.
WARNING: NEVER EXCEED MAXIMUM WATTAGE Indicated as bulb may cause fire.
CAUTION:
This portable lamp has a polarized plug (one blade is wider than the other) as
a safety feature. This plug can be used in a polarized outlet only one way. If
plug does not fit fully into the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician.
DO NOTALTER THE PLUG!
PROPER LAMP CARE
Use a soft cloth to dust your lamp on a regular basis. Never use chemicals or an abrasive cleaner, to do so may damage the finish on your lamp.
TROUBLESHOOTING:
If fixture does not work:
- Turn off electrical power and check all wire connections.
- Check fuse or circuit breaker and replace if necessary. 3. Check to make sure light bulb is in working order.
CONTACT US
E-mail:[email protected]