MEAN WELL RPS-30 Series RPS-30-3.3 Power Supply Instruction Manual
- June 13, 2024
- MEAN WELL
Table of Contents
**MEAN WELL RPS-30 Series RPS-30-3.3 Power Supply Instruction Manual
**
Features
- 3″ x2 compact size
- Medical safety approved (2 x MOPP) according to ANSI/AAMI ES60601-1 and IEC/BS EN/EN60601-1
- Suitable for BF application with appropriate system consideration
- Cooling by free air convection
- EMI class B for class II configuration
- No load power consumption<0.1W
- Extremely low leakage current
- Protections: Short circuit/Overload / Over voltage Lifetime > 105K hours
- Operating altitude up to 4000 meters 3 years warranty
Description
RPS-30is a 30W highly reliable green PCB type medical power supply with a high power density on the 3″ by 2” footprint. It accepts 80~264VAC input and offers various output voltages between 3.3V and 48V.
The working efficiency is up to 92% and the extremely low no load power consumption is down below 0.1W. RPS-30is able to be used for Class Il (no FG) system design. The extremely low leakage current is less than 80 #A. In addition, it conforms to international medical regulations (2*MOPP) and EMC BS EN/EN55011, perfectly fitting all kinds of BF rated “patient contact” medical system equipment.
Applications
- Oral irrigator
- Hemodialysis machine
- Medical computer monitors
- Sleep apnea devices
GTIN CODE
MW Search: hitps://www.meanviell.comiserviceGTIN.aspx
Model Encoding
SPECIFICATION
ORDER NO.| RPS – 30 – 3. 3| RPS – 30 – 5|
RPS – 30 – 7. 5| RPS – 30 – 12| RPS – 30
– 15| RPS – 30 – 24| RPS – 30 – 48
---|---|---|---|---|---|---|---
OUTPUT| DC VOLTAGE| 3.3V| 5V| 7.5V| 12V| 15V| 24V| 48V
RATED CURRENT| 6A| 6A| 4A| 2.5A| 2A| 1.25A| 0.625A
CURRENT RANGE| 0 ~ 6.6A| 0 ~ 6.6A| 0 ~ 4.4A| 0 ~ 2.75A| 0 ~ 2.2A| 0 ~
1.375A| 0 ~ 0.687A
RATED POWER| 19.8W| 30W| 30W| 30W| 30W| 30W| 30W
PEAK LOAD(10sec.) Note.2| 21.8W| 33W| 33W| 33W| 33W| 33W| 33W
RIPPLE & NOISE (max.) **Note.3| 80mVp-p| 80mVp-p| 80mVp-p| 100mVp-p|
100mVp-p| 150mVp-p| 150mVp-p
VOLTAGE ADJ.RANGE| 3.1~3.6V| 4.7~5.5V| 7.12~8.3V| 11.4~13.2V|
13.5~16.5V| 22.8~27.6V| 45.6~52.8V
VOLTAGE TOLERANCE| ±2.0%| ±2.0%| ±2.0%| ±2.0%| ±2.0%| ±1.0%| ±1.0%
LINE REGULATION| ±0.5%| ±0.5%| ±0.5%| ±0.5%| ±0.5%| ±0.5%| ±0.5%
LOAD REGULATION| ±1.0%| ±1.0%| ±1.0%| ±1.0%| ±1.0%| ±1.0%| ±1.0%
SETUP, RISE TIME| 200ms, 30ms / 230VAC 200ms, 30ms / 115VAC at
full load
HOLD UP TIME (Typ.)| 30ms / 230VAC 16ms / 115VAC at full load
INPUT| VOLTAGE RANGE Note. 5| 80 ~ 264VAC
FREQUENCY RANGE| 47 ~ 63Hz
EFFICIENCY (Typ.)| 80%| 82%| 84%| 88%| 89%| 89.5%| 92%
AC CURRENT (Typ.)| 1A / 115VAC 0.5A / 230VAC
INRUSH CURRENT (Typ.)| СOLD STAR 30A/115VAC 60A/230VAC
LEAKAGE CURRENT(max.) Note.6| Touch current< 80μA/264VAC
PROTECTION| OVERLOAD| 115 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is
removed
OVER VOLTAGE| 3.8~5V| 5.7~6.8V| 8.6~11.3V| 13.8~16.2V| 17.2~20.3V|
28.4~32.4V| 55.2~64.8V
Protection type : Shut down o/p voltage, re-power on to recover
ENVIRONMENT| WORKING TEMP.| -30 ~ +70℃ (Refer to “Derating Curve”)
WORKING HUMIDITY| 20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY| -40 ~ +85℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT| ±0.03% / ℃ (0 ~ 50℃)
VIBRATION| 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X,
Y, Z axes
OPERATING ALTITUDE Note.7| 4000 meters
SAFETY & **EMC (Note. 8)| SAFETY STANDARDS| IEC60601-1, TUV
BS EN/EN60601-1, EAC TP TC 004, UL ANSI / AAMI ES60601-1 (3.1
version),CAN/CSA-C22.2 No. 60601-1:14 – Edition 3 approved; Design refer to BS
EN/EN60335-1
ISOLATION LEVEL| Primary-Secondary: 2xMOPP
WITHSTAND VOLTAGE| I/P-O/P: 4KVAC
ISOLATION RESISTANCE| I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION| Parameter| Standard| Test Level / Note
Conducted emission| BS EN/EN55011 (CISPR11)| Class B
Radiated emission| BS EN/EN55011 (CISPR11)| Class B
Harmonic current| BS EN/EN61000-3-2| Class A
Voltage flicker| BS EN/EN61000-3-3| —–
EMC IMMUNITY| BS EN/EN55035, BS EN/EN60601-1-2
Parameter| Standard| Test Level / Note
ESD| BS EN/EN61000-4-2| Level 4, 15KV air ; Level 4, 8KV contact
RF field susceptibility| BS EN/EN61000-4-3| Level 3, 10V/m( 80MHz~2.7GHz
)Table 9, 9~28V/m( 385MHz~5.78GHz )
EFT bursts| BS EN/EN61000-4-4| Level 3, 2KV
Surge susceptibility| BS EN/EN61000-4-5| Level 4, 2KV/Line-Line
Conducted susceptibility| BS EN/EN61000-4-6| Level 3, 10V
Magnetic field immunity| BS EN/EN61000-4-8| Level 4, 30A/m
Voltage dip, interruption| BS EN/EN61000-4-11| 100% dip 1 periods,
30% dip 25 periods,100% interruptions 250 periods
OTHERS| MTBF| 3550.0K hrs min. Telcordia SR-332 (Bellcore)
; 628.7K hrs min. MIL-HDBK-217F (25℃)
DIMENSION (LWH)| 76.250.824mm or 3″ 2″ 0.945″ inch
PACKING| 0.09Kg; 120pcs/11.8Kg/0.94CUFT
NOTE|
- All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
- 33% Duty cycle maximum within every 30 seconds. Average output power should not exceed the rated power.
- Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1μf & 47μf parallel capacitor.
- Tolerance : includes set up tolerance, line regulation and load regulation.
- Derating may be needed under low input voltages. Please check the derating curve for more details.
- Touch current was measured from primary input to DC output.
- The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
- The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”
(as available on http://www.meanwell.com)※ Product Liability Disclaimer For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx
| Arrow.com.| File Name:R PS-30 -SPEC __2022-09-20
Block Diagram
Derating Curve
Static Characteristics
Mechanical Specification
AC Input Connector (CN1): JST B3P-VH or equivalent
Pin No. | Assignment | Mating Housing | Terminal |
---|---|---|---|
1 | AC/N | JST VHRor equivalent | JST SVH-21T-P1.1or equivalent |
2 | No Pin | ||
3 | AC/L |
DC Output Connector (CN2) : JST B2P-VH or equivalent
Pin No. | Assignment | Mating Housing | Terminal |
---|---|---|---|
1 | +V | JST VHRor equivalent | JST SVH-21T-P1.1or equivalent |
2 | -V |
Installation Manual
Please referto : http://www.meanwell.com/manual.htm|
ANSI/AAMI ES60601-1 BS EN/EN60601-1 IEC60601-1 TPTC004
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>