Quest V80 HYPERQ Metal Detector Instructions

Quest V80 HYPERQ Metal Detector

Product Information

The product is a metal detector equipped with a built-in Gyro Sensor and Bluetooth technology. The Gyro Sensor enhances the device’s efficiency by automatically initiating ground balancing, analyzing swing speed and orientation, and providing more consistent and reliable signals. The Bluetooth feature allows for wireless audio connectivity with compatible headphones, providing a highly immersive listening experience.

Product Usage Instructions

Using the Gyro Sensor

1. Locate the Gyro sensor setting on the detector.
2. Click the “+” or “-” buttons to select different functions.
3. Click the upper button to activate or deactivate the selected function.

Adjusting Backlight Level

1. Find the Display setting on the detector.
2. Click the upper button to select Backlight level.
3. Click the “+” or “-” buttons to increase or decrease the LCD backlight brightness.

Adjusting LCD Refresh Rate Level

1. Locate the LCD refresh rate setting on the detector.
2. Click the upper button to select backlight setting.
3. Click the “+” or “-” buttons to increase or decrease the LCD refresh rate.

Adjusting Clock

1. Find the Clock setting on the detector.
2. Click the “+” or “-” buttons to increase or decrease the hour number.
3. Hold the upper button to switch to minutes setting.
4. Click the “+” or “-” buttons to increase or decrease the minute number.

Pairing Bluetooth Headphones

1. Keep the Bluetooth headphones within 5 inches of the detector’s control box.
2. Turn off the headphones.
3. Hold the power button for 5 seconds to enter pairing mode on the headphones.
4. The headphones’ name will be displayed on the detector’s screen.
5. Use the “+” or “-” buttons to locate and select the desired headphones.

Note: For optimal audio performance, it is recommended to use Quest headphones or devices equipped with AptXLL Low Latency technology to minimize audio delays.

GROUND

• The inclusion of a built-in Gyro Sensor in the metal detector adds a layer of intelligence that significantly enhances the user experience and the device’s e”ciency.
• This sensor is capable of interpreting the user’s movements and intentions, thereby streamlining the process of treasure hunting. For instance, it can automatically initiate ground balancing without requiring any manual input, which saves time and ensures that the device is always optimized for the soil conditions.
• Moreover, the gyro sensor can analyze the swing speed and orientation of the detector, helping to stabilize and unify target ID readings. This means you get more consistent and reliable signals, which is crucial for di!erentiating between valuable finds and mere junk.
• The sensor also contributes to energy e”ciency. When it detects that the unit is stationary, it can automatically switch to a low- power mode, extending the battery life and allowing for longer detecting sessions. When power saving mode is ok the battery with cross symbol will appear on the stand by interface.
• All of these features combined make for a more intuitive, e”cient, and user-friendly detecting experience, allowing you to find treasure more quickly and with greater accuracy.

How to adjust Gyro Sensor

• When you spot the Gyro sensor setting, click or buttons to select di!erent functions.
• Then click the upper to activate or inactivate.

PROGRAMING

SET 1

How to adjust Backlight level

• When you spot the Display setting, click the upper to select Backlight level.
• Then click or buttons to increase or decrease the LCD backlight brightness.
• Higher refresh rate provide more smooth LCD viewing experience but it consume more battery.

How to adjust LCD refresh rate level

• When you spot the LCD refresh rate setting, click the upper to select backlight setting.
• Then click or buttons to increase or decrease the LCD refresh rate.
• The clock is in 24hours format and powered by the battery of detector. Once the battery is out of energy the clock will be reset to default time.

How to adjust Clock

• When you spot the Clock setting, click or buttons to increase or decrease hour number, hold upper to switch to minutes setting.
• Then click or buttons to increase or decrease minute number.

SET 2

We offer a dedicated page for managing your wireless audio gear, similar to smartphone settings. Here, you can pair, unpair, delete, so you can switch between your go-to headphones freely. Our built-in Bluetooth uses low-latency technology for real-time audio. For optimal performance, we recommend using Quest headphones or devices equipped with AptXLL Low Latency tech to minimize audio delays.

WIREFREE HE

• Highly immersive over ear headphones

WIREFREE VIBE

• Compact over ear headphones

WIREFREE AIR

• Sweat-proof bone Conductive earphones

Searching for new devices

• To pair Bluetooth headphones with the detector, keep them within 5 inches of the control box. Turn off the headphones, then hold the power button for 5 seconds to enter pairing mode. The headphones’ name will show up on the detector’s screen.
• Use or buttons to locate the desired headphones and click upper button to pair.

Connect to previously paired device

• Make sure the device is on and not paired to other smartphone or detector.
• Use or buttons to select the desired device.
• Click upper button to pair.
• Click search to continue searching for other devices.

Disconnect to previously paired device

• Use or buttons to select the desired option.
• Click upper button to unpair or disconnect(delete).

SET 3

Reset to factory settings

When to Reset:

• User Error: If the settings have been messed up either by accident or due to lack of understanding, resetting is the quickest way to correct any misconfigurations and start afresh.
• Adding this point highlights that sometimes users, especially those new to the device or those who share the device with multiple people, may unintentionally change settings in a way that negatively impacts performance. In such cases, a factory reset serves as a convenient ‘undo’ button to revert the machine back to a state of known, reliable functionality.
• Cons:
• Loss of Customization: Any personalized settings carefully adjusted for specific conditions will be lost.
• Time-Consuming: You’ll need to spend time reconfiguring the settings to suit your needs.
• Reset to factory default setting
• Use or buttons to select YES/NO
• When YES underlined, click upper button to reset.
• The detector will be set to default instantly.

ABOUT FIRMWARE

• To view your detectors firmware or confirm your detector is been upgraded to the latest firmware.

SET 4

FIRMWARE UPGRADING

1. Turn On Your PC: Make sure it’s a Windows system.
2. Download Software: Get the QUEST updater software and the new firmware onto your computer from www.questmetaldetectors.com/download
3. Get the Cable: Use the USB cable that came with your detector.
4. Connect Devices: Plug the USB cable into both your PC and the detector.
5. Prep the Detector: Turn it off. Then, hold the “Gear” and “Pinpoint” buttons while turning it back on.
6. Start Software: Open the QUEST updater program on your PC.
7. Find Your Detector: Click the drop-down menu where it says “” and select “USB (COM x)”. The “x” could be any number between 1-9.
8. Connect: Click the “Connect” button in the software.
9. Upgrade: Click “Select Firmware”, find the new firmware you downloaded, and then click “Update”.

MAINTENANCE

CARE

Before You Go: Get Set Up Right

• Check Tightness: Before heading out, make sure all screws and cam-locks are tight. A loose part can ruin your hunt.
• Clean Hands: If you’ve used bug spray or sunscreen, wash your hands or wear gloves. This prevents your detector from getting dirty.

Using Your Detector: Pay Attention to Details

• Protect the Screen: Your screen can scratch easily. Use the provided screen protector to avoid damage.
• Cable and Connections: Ensure that the coil cable isn’t twisted or bent. Don’t use tools to tighten the connectors.
• Avoid Sand: Sand can jam the moving parts. If your detector gets sandy, rinse it with fresh water.

After Your Hunt: Time to Clean Up

• Basic Cleaning: Use a damp cloth or running tap water to clean the detector. No harsh chemicals needed.
• Beach Cleanup: If you’ve been to the beach, rinse every part of the detector to remove salt and sand.

Maintenance: Keep It Running Smoothly

• Battery Care: Charge the battery every 3-4 months to extend its life. Replace worn-out batteries at authorized centers.
• Coil and coil cover: This is the heart of your detector. If the cover looks worn, replace it to protect the coil.
• Headphone Care: Keep the headphone socket dry and sand-free. Use a used toothbrush to clean if sand enters.

Safety Measures: Safety First

• No Water, No Oil: Don’t submerge your detector or expose it to gasoline or oil.
• Temperature Guidelines: Charge between 0°C and +40°C. Store between -20°C and +70°C. Never leave it in a hot car.
• Child Safety: Keep small parts away from kids. They can be a choking hazard.
• Speaker and Screen: Don’t poke the speaker. Clean the screen with a damp cloth and mild soap only.

PARTS

1| Front Panel of Control Box 11 Telescopic Rod Extension Thread Cap
---|---
2|  Back Panel of Control Box 12 2X Armrest Screws
3| 11×10″ Blizzard Search Coil        13 Control Box Locking Level
4| Search Coil Protection Cover 14 Screw, Washers, Nut of Coil
5| Search Coil Cable and Connector                  15 Rod Locking Ring w/ Rubber Band
6| Armrest Main Body                                16 Rod Locking Thread(not removable)
7| Recharge Jack Waterproof Cap                            17 Positioning Piece of Rod
8| Rubber Sling of Waterproof Cap                      18 Fastener of Rod Lock Ring
9| Detachable Speaker Module 19 Speaker Screw
10| Armrest Stripe 20 Front Panel Film

Parts

SPECIFICATIONS

Park Field Beach Gold Cache

| 4+ 9(Profiles) Park Field Beach Gold
Telescopic rod| 4 Sections Design: 1x Aluminum 2x Carbon Fiber 1x Plastic| 4 Sections Design:

3x Aluminum Round 1x Plastic

Weight| 1.34kg/2.95lb| 1.37kg/3lb
Receiver Dongle| Included| Optional

TROUBLE SHOOTING

1. Detector Won’t Turn On or Shuts Off Unexpectedly
   • Check Coil: Make sure it’s plugged in.
   • Charge Up: Put your detector on charge.
   • See the Light: Make sure the green charging light is blinking.
   • Use Right Charger: Use a USB charger with a 2A@5V rating.
   • Check Connections: Ensure the charging port and cable are clean and snug.
2. Too Much Noise Sound
   • Move Away: Keep distance from electronic devices or power lines.
   • Noise Cancel: Use your detector’s Auto Noise Cancel feature.
   • Balance It: Perform a Ground Balance.
   • Lower Sensitivity: Turn down the Sensitivity setting.
3. No Sound with Supplied Wireless Headphones
   • Turn On Headphones: Make sure they are on.
   • Wireless On: Check if detector’s wireless is on and paired.
   • Charge Headphones: Make sure they are charged.
   • Volume: Check both detector and headphone volume.
   • Try Wired: If all else fails, try wired headphones.
4. Headphones Won’t Pair
   • Restart: Turn off headphones and try pairing again.
   • Close Range: Stay within 3 feet of the detector.
   • Less Interference: Move away from other wireless devices.
   • Reset: Factory reset the headphones and try again.
5. Sound Issues in Wireless Headphones
   • Stay Close: Keep headphones within 3 feet of the detector.
6. No Sound with Wired Headphones
   • Power Check: Make sure the detector is on.
   • Plug In: Ensure headphones Adaptor is fully plugged in.
   • Volume: Make sure it’s loud enough to hear.
   • Check Headphones: Try another set if available.
7. No Vibration
   • Settings: Make sure vibration is enabled in settings.
8. Charging but No Indicator
   • Right Cable: Use a quality USB cable
   • Right Charger: Use a charger with 2A@5V.
   • Off Mode: Try charging with the detector off.
9. Speaker Sounds Off After Being in Cold Water
   • Wait and Dry: Allow up to 30 minutes for the internal air pressure in the detector to normalize.
   • Blow Gently: Use your mouth to blow air through the ventilation gap of the speaker to help speed up the drying process.

Warranty

V Series Metal Detector Warranty

Thank you for choosing the V Series Metal Detector. We’re committed to providing you with a high-quality product, designed for optimal performance and durability. This document outlines our general warranty terms for your new detector.

Waterproof Capability

• Your V Series Metal Detector is designed to be waterproof up to a depth of 5 meters.
• Please note that the waterproof capability is conditional upon correct usage and preparation as outlined in the user manual. Failure to adhere to these guidelines may void this aspect of the warranty.

Warranty Period

• Control Box: The control box of your V Series Metal Detector comes with a 5-year warranty, effective from the date of purchase.
• Coil: The coil component of your detector is covered under a 2-year warranty, effective from the date of purchase.

Exclusions

This warranty does not cover damage resulting from:

• Improper usage or failure to follow the user guidelines.
• Attempts to repair or modify the device by anyone other than authorized service personnel.
• Accidental drops, impacts, or exposure to conditions outside the specified operational parameters.
• Customer Responsibility
• It is the responsibility of the customer to demonstrate that the product has been used according to the guidelines to avail of the warranty service. Any evidence of misuse may void the warranty.

Service and Repairs

• For warranty service or repairs, please contact an Authorized Service Center.
• Proof of purchase will be required to validate the warranty period. Any service or repair performed by unauthorized personnel will void the warranty.

Limitation of Liability

• The warranty is limited to the repair or replacement of defective parts. We are not responsible for any consequential losses or damages arising from the use of the product.
• By using your V Series Metal Detector, you are agreeing to the terms of this warranty.
• Please keep this document and your purchase receipt in a safe place for future reference.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

References

• HYPERQ Multi-Frequency | QUEST METAL DETECTORS
• Download | Quest Metal Detectors | Irvine

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>