Waterflex Lana bike Evo Swimming Pool Bike User Manual
- June 13, 2024
- Waterflex
Table of Contents
Waterflex Lana bike Evo Swimming Pool Bike
Product Information
This is a user manual for an exercise bike. The manual provides safety precautions, maintenance advice, and an exploded view of the bike’s structure. The exercise bike has a maximum load capacity of150 kg.
Safety Precautions
For your safety, please read these instructions before use!
Assembly this product properly using original parts according to the
installation instruction. Before assembly, inspect whether packages are in
good condition and whether spare parts are complete in accordance with
transport precautions and the list of spare parts.
Please place the exercise bike on a dry and flat ground.
Before starting any exercise, it is essential to consult your doctor. An
excessive training or incorrectly executed may cause health issues.
For sustainable use of your bike, please follow these instructions .
- Regularly check the pH of your pool water. It must be between 6.7 and 7.6.
- In case of water shock treatment, please get out the bike from water.
- Avoid placing the bike too close of run-back nozzle.
- Get out the bike from water after each use and rinse with clear water.
WARNING
Check the pH of the water on each utilizations. The pH water should be between
6.7 and 7.6. Any damages caused by a wrong pH balance cancel the warranty.
(For anodized aluminum, inox parts, and silicone parts)
- The bike is made of anodized aluminum and marine quality AISI 316L stainless steel conforming to standard 2001/95/EC on the general safety of products. Its anti-corrosion treatment makes it suitable for chlorinated water, seawater and thermal waters. It does not require any special care in pH-controlled water (6.7 / 7.6).
- Remove the bike after every use, rinse it with soft water, and wipe it. Regularly check the pH of your swimming pool (pH 7.2 advisable)
- Remove the bike during manual dosages of chemical products or impact treatments. Keep the bike away to avoid any splashes that can stain or any deposits (due to the concentration of chemical products).
- Deposits of powder, salt, corrosive products that encourage the corrosion process.
- When first cleaning the surfaces of the swimming pool (before filling it) as well as subsequent maintenance cleaning, it is advised that you remove the bike from the pool so as to avoid any risk of stains or deposits.
- When you are not using the bike, it must be rinsed thoroughly with soft water, then dried and stored in a location away from chemical products, as well as equipment used for dosing chemical products for pool maintenance.
- If there are lime-scale deposits or stains, these can be removed with a cleaner for anodized aluminum and a non-abrasive soft cloth. Then wash with clean water and dry it completely.
- When you put the bike on the water, hold back the bike for prevent impact and damage to your pool or your bike.
Exploded view
Note: use these tools only to assemble this exercise bike.
WARNING
Keep the tools away from babies and children.
Installation
Step 1
Install 20 to the front tube with 19, 21 and 22.
Step 2
Install the front foot tube (18) onto the main frame (23) logo side, then adjust it with knob (17).
Step 3
Install the back foot tube (13) onto the main frame (23),then adjust it with
knob (17).
Step 4
Click-and-turn” (10).
Install handlebar tube (2) onto the main frame (23), then adjust their
position with the «Click-and-turn» handle (10).
WARNING
To prevent injuries, align the click-and-turn with the frame. (See picture
above)
Step 5
Click-and-turn” (10). Install seat tube (6) onto the main frame (23), then
adjust their position with the «Click-and-turn» handle (10).
Step 6
Unscrew the locknuts against (13) pre-mounted pedals.
Step 7
Lock the pedals (3) on the cranks (14) with the lock-nuts (15).
Step 8
To the left pedal A (with crank A) the nut is screwed clockwise and against
the lock-nut in the direction clockwise.
Step 9
For the right pedal B (with crank B) the nut is screwed in the anti-clockwise
and against the lock-nut anticlockwise
Height adjustment knob
To modify the height of your aqua bike , unscrew and pull the round
adjustment knob to unlock the bike leg. Then adjust the length and let the
adjustment knob come back in position and screw it firmly
Aqua double speed pedal.
These ultra-innovative pedals use a new technology, to increase resistance for
even more sport. The lateral valve folded under the pedal offers ideal
resistance for warming up. To boost your training, unfold the valve in order
to widen the area in contact with the water. This way you can double your
effort.
To use the extra-resistance, push the latch on the side and toggle the flap on
the opposite side, and release the latch.
Training advices
Exercises instructions
This stage helps get the blood lowing around the body and the muscles
working properly. It will also reduce the risk of cramp and muscle injury. It
is advisable to do a few stretching exercises as shown below. Each stretch
should be held for approximately 30 seconds, do not force or jerk your muscles
into a stretch – if it hurts, STOP.
The Cool Down Phase
This stage is to let your Cardio-vascular System and muscles wind down. This
is a repeat of the warm up exercise e.g. reduce your tempo. The stretching
exercises should now be repeated, again remembering not to force or jerk your
muscles into the stretch.
As you get trained you may need to train longer and harder. It is advisable to train at least three times a week, and if possible space your workouts evenly throughout the week. One more thing Oto link You’re looking for advice for your aqua bike use? One link
Warranty
Your Waterfall product is guaranteed against any manufacturing defect; 2 years
for the metallic frame; 6 months for the wear and tear parts in accordance
with the terms below. This warranty runs from the date of the invoice.
The warranty is rendered null and void in the event of a repair carried out to
the equipment by a person not approved by Waterfall. Faulty parts must be
returned to Waterfall within the warranty period in order to be covered. The
warranty does not cover labor, the cost of unauthorized replacement, or the
cost of transporting the parts in question.
Are considered wearing parts: pedals (foam protection and straps), wheels, silicone feet, handles «click and turn», adjustment knob, protection plugs, anode, bottle holder.
The following are expressly excluded from the warranty .
- Malfunction or damage arising from the use of unauthorized accessories.
- Damage resulting from the installation or a repair which does not comply with the safety .Defects resulting from accidents, incorrect or unreasonable use (impact, contact with chemical products,
- inappropriate handling), alteration as well as the consequences of the normal wear and tear of the product.
The shipping box must be kept in perfect condition throughout the duration of the warranty. The warranty becomes void if failure to comply with this clause.
Conseils
www.waterflex.fr
Assistance / SAV