LIDEKA Solar Powerbank Solar Charger 30.000 mAh User Manual

LIDEKA Solar Powerbank Solar Charger 30.000 mAh

Congratulations on purchasing an item from the Lideka Solar® collection.

Lideka® is a brand that does everything it can to improve your life. That’s why we hope you put all your concerns, questions, comments and complaints with us, we are always there for you, in every situation!

Please read the manual carefully for the best user experience and if necessary to avoid accidents or problems. We are of course always available for questions or comments.

Product tips

1. We recommend that you mainly charge the Solar Power Bank via the wall socket, and use the sun as support. We recommend this because the Power bank is really gigantic compared to the solar panel. If you only consider that you can charge your phone on average 10-15 times with a full power bank, and this would take 1 Ox 5 hours = 50 hours at the socket, then you also understand that you will have to be really patient with charging via the sun. have to have.
2. If you decide to continue charging via the sun, we recommend that you take an external solar panel with you. It is absolutely not our intention to sell additional items, we only want to help and advise you as best as possible. If you would like advice on the right solar panels, we would like to hear from you, we are ready to help you.
3. Please note that not every phone has the “wireless charging” feature, so it won’t work with every phone.
4. Use the blue USB port if you want to charge extra fast.
5. Sometimes the device will automatically go into standby, that has to do with the fact that there is a special protection on it, you just press the on/off button and it will continue charging. This protection ensures that the power bank does not lose power unnecessarily.
6. Take into account an average charging time at the socket of +- 36 hours.

LIDEKA IS A FRIEND, A FEIEND FOR LIFE, he is trustworthy, transparent, and helpful.

Introduction

This wireless solar energy power bank supports QC2.0/QC3.0 output voltage fast charge protocol, FCP/AFC/SFCP output voltage and input voltage fast charge protocol, MTK PE+ 1.1 & 2.0 output voltage fast charge protocol, USB-C/PD2.0/PD3.0 input voltage and output voltage protocol, USS C PD3.0 PPS output voltage protocol and is suitable for BC1 .2 mobile Apple and Samsung devices.

The product features a micro-USS charging port, TYPE-C interface and solar power input power. The built-in lithium-ion battery is charged from a constant current and voltage source. The power bank supports multiple electronic devices including mobile phones, tablets, MP3 devices and more.

The product features a micro-USB charging port, TYPE-C interface and solar power input power. The built-in lithium-ion battery is charged from a constant current and voltage source. The power bank supports multiple electronic devices including mobile phones, tablets, MP3 devices and more.

USB -2, USB-3 and USB-4: standard output 5V/3A
USB -1: Supports QC2.0/QC3.0 DCSV/3.0A 9V/2A 12C/1.SA
TYPE -C: supports PD2.0/PD3.0 PPS FCP AFC SFCK MTK bi-directional fast charge protocol

USB-1 and TYPE-Care fast charging USB ports. Output voltage of SV is only supported when two or more output ports are used at the same time. This device is equipped with the latest technologies in fast charging and thus achieves an efficiency of 90% and an extremely low energy consumption. With smart techniques, the device offers multiple protection functions and the power bank is safe and reliable in use.

Specifications

• Micro input: DC 5V/2A 9V/2A
• TYPE-C input: DC SV3A 9V2A
• Solar charging: DC SV/1 .SW
• USB-1 output voltage: DC SV/3.0A 9V/2A 12V/1.5A
• Output voltage USB-2, -3, -4: DC 5V/3A
• TYPE-C output voltage: DC SV/3.0A 9V/2A 12V/1.5A
• Wireless output voltage: 1 OW

Display functions

1. Solar panel
2. Cord
3. Solar indicator
4. USB port 1 /2/3/4
5. USB silica gel protect plug
6. Micro/TYPE-C USB port
7. Power indicator
8. On/off button
9. LED lamp
10. Wireless charging indicator
11. Wireless charging point

Switching on and off

Switch the device on with the on/off button to activate the wireless charging point and all USB ports. When the red light flashes three times, the power bank is ready to be used and the charging process begins. The light will turn green when an external device is detected. When the device is fully charged and the charging process is complete, the light turns off.

Charging with adapter

When an external adapter is connected to a USB or TYPE-C input, the built-in battery of the power bank is charged. Four blue lights turn on automatically and provide an indication of battery power as follows:

Charging with solar panel

Place the power bank at an angle of 45 degrees to optimally expose the solar panel to sunlight. The built-in charging circuit turns on and the lithium battery is charged. Use the on/off button to view the stored power (this can be displayed as “Power View”).

Battery indication

Briefly press the power button to enable the USB ports. The LED power indicator shows the available battery power according to the table below. The USB ports are automatically turned off if no input is detected within 30 seconds.

Wireless charging

When the wireless charging function is used, a desired device can be charged with a maximum output voltage of 1 OW. When all USB ports are used at the same time or when the current falls within a range of 2.SA, the wireless charging function will automatically switch to SW. The charging function is completely switched off at a range of 3A.

Instructions LED lamps

Press the button twice to turn the LED lights on or off and short press the button to change light settings (soft light, bright light, flashing light, SOS mode).

Protection functions

Input voltage and voltage undercurrent protection
When an adapter with different specifications (less than SV /2.1 A) is used for charging, the power bank will automatically be adjusted to the output voltage of the adapter used to prevent damage. The device does not support output voltage discharge power while charging, but it does while charging via a solar panel.

Input voltage short-circuit protection
If a short circuit occurs due to improper use or a damaged adapter, for example, the device will automatically shut down to prevent product damage.

Output voltage overcurrent protection

When the output voltage of any of the USB ports is exposed to more than 3.2A, the power bank will turn off automatically to protect both devices (power bank and external device). The power button light indicator will be switched off after four flashes. The device must be recharged and activated to start the discharge process.

Output voltage short-circuit protection

When a short circuit occurs within one of the USB ports, the device will automatically shut down to protect both devices (power bank and external device). The power button light indicator will go out after four flashes. The device must be reactivated and charged to start the discharge process.

Warnings

• Do not expose the device to high ambient temperatures for a long time. Maximum 45 degrees. (which occurs, for example, near radiators or stoves). Don’t put it in the sun for too long either. Overheating will damage the device and is associated with potential danger.
• This product consists of electrical components. To avoid danger and damage, never disassemble this appliance.
• This device contains lithium-ion batteries. Please take into account your local regulations and legislation regarding the disposal and recycling of batteries.
• Never expose removed batteries to excessive heat and keep them away from sunlight and fire.
• Be absolutely patient with solar and power grid charging. The power bank has a very high ,capacity and therefore needs time.

CUSTOMER SUPPORT

Follow us on Social Media:
LidekaHome
lnstagram – Facebook – Tiktok – Pinterest  – Linkedin – Youtube

Instagram: Lideka2020
Phone: +31 85 – 06 01 297
Facebook: Lideka

Email: [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>