BRESSER 7009994 Thermo Hygro 3CH Sensor 433MHz Instruction Manual

: June 13, 2024
: BRESSER

Table of Contents

BRESSER 7009994 Thermo Hygro 3CH Sensor 433MHz
Product Information
Product Usage Instructions
General Warning
FEATURES OF THE REMOTE UNIT
FIRST OPERATION
TECHNICAL DATA
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BRESSER 7009994 Thermo Hygro 3CH Sensor 433MHz

BRESSER-7009994-Thermo-Hygro-3CH-Sensor-433MHz-product

Product Information

The Thermo-Hygro-3CH-Sensor 433MHz (Art. Nr.: 7009994) is a remote unit that measures temperature and humidity. It operates viaa power source, either a power supply or batteries. The device has a display on the front side that shows the current temperature, humidity, channel selection, and low battery warning symbol. It also has a wall mount for easy installation on walls, and a fold-out stand for positioning on a flat surface. The unit requires 2 AAA 1.5V batteries for operation.

Product Usage Instructions

Before inserting the batteries, set the transmission channel (1-3) using the channel selection feature.
Insert 2 AAA 1.5V batteries into the battery compartment, ensuring correct polarity.
If necessary, wear protective gloves when handling batteries to avoid burns.
Maintain adult supervision when children are using the device.
Keep packaging materials, such as plastic bags and rubber bands, out of reach of children to prevent choking hazards.
Avoid exposing the device to high temperatures.
Use only the recommended batteries and do not short-circuit them or throw them into a fire to prevent accidents.
To transmit the current measured values, press the TEST key on the device.
If the batteries are nearing depletion, the low battery warning symbol [ ] will be displayed on both the sensor and weather station.

For more detailed information or translations of the instructions, visit our website using the QR code or web link provided in the manual.

General Warning

DANGER!
This device contains electronic components which operate via a power source (power supply and/or batteries). Do not let children use the device while unattended. Only use the device as described in the manual, otherwise you run the risk of an electric shock.
Children should only use the device under adult supervision. Keep packaging material, like plastic bags and rubber bands, out of the reach of children, as they pose a choking hazard. Keep batteries out of the reach of children. Make sure you insert the batteries correctly. Empty or damaged batteries could cause burns if they come into contact with the skin. If necessary, wear adequate gloves for protection.

DANGER!
Do not expose the device to high temperatures. Use only the recommended batteries. Do not short-circuit the device or batteries, or throw them into a fire. Excessive heat or improper handling could trigger a short-circuit, a fire or an explosion!

NOTE!
Do not disassemble the device. In the event of a defect, plea-se contact your dealer. The dealer will contact the Service Centre and can send the device in to be repaired, if neces-sary. Use only the recommended batteries. Always replace weak or empty batteries with a new, complete set of batteries at full capacity. Do not use batteries from different brands or with different capacities. The batteries should be removed from the unit if it has not been used for a long time.

NOTES ON CLEANING
Separate the device from the power supply or remove the batteries before cleaning.

NOTE!
Only use a dry cloth to clean the exterior of the device. Do not use any cleaning fluid to avoid damaging the electronics.

SCOPE OF DELIVERY
Outdoor sensor, instruction manual, batteries required (not included): 2 pcs. Batteries (1.5V, type AAA)

FEATURES OF THE REMOTE UNIT

BRESSER-7009994-Thermo-Hygro-3CH-Sensor-433MHz-fig-1

DISPLAY (ON FRONT SIDE)
Displays temperature, humidity, current channel and low battery warning symbol [ ].

WALL MOUNT
For mounting the sensor on walls.

SET THE TRANSMISSION CHANNEL (1-3)
Input channel for the weather station. Set the channel before inserting the batteries.

TEST
TEST key transmits the current measured values.

E °C / °F – BUTTON
°C/°F button switches between Celsius (°C) and Fahrenheit (°F).

BATTERY COMPARTMENT
Unit requires 2 pcs. UM-4 or “AAA” 1.5V batteries

TAND (FOLD-OUT)
For positioning the device on a flat surface.

FIRST OPERATION

Open the battery compartment cover.
Set the desired channel with the switch. If you are using only one transmitter, please leave the selection at „1“.
Insert 2 new UM-4 or „AAA“ 1.5V batteries observing correct polarity.
Close the battery compartment cover and set the unit in the desired location. Although the outdoor sensor is weatherproof, it should not be placed in places exposed to direct sunlight, rain or snow.

TIPS FOR SETTING UP:
Please follow the instructions below to ensure optimum operation of the equipment:

Assign each external transmitter unit its own channel.
Place the receiver unit and transmitter unit within 1 meter of each other and activate the manual search for available signals from all connected outdoor sensors on the main unit (weather station not included with delivery).

„Batteries empty“ indicator
When batteries are nearing depletion, the symbol [ ] is displayed on the sensor and weather station.

DISPOSAL
Dispose of the packaging materials properly, according to their type, such as paper or cardboard. Contact your local waste-disposal service or environmental authority for information on the proper disposal. Do not dispose of electronic devices in the household garbage! As per the Directive 2002/96/EC of the European Parliament on waste electrical and electronic equipment and its adaptation into German law, used electronic devices must be collected separately and recycled in an environmentally friendly manner.

In accordance with the regulations concerning batteries and rechargeable batteries, disposing of them in the normal household waste is explicitly forbidden. Please make sure to dispose of your used batteries as required by law — at a local collection point or in the retail market. Disposal in domestic waste violates the Battery Directive. Batteries that contain toxins are marked with a sign and a chemical symbol.

battery contains cadmium
battery contains mercury
battery contains lead

EC DECLARATION OF CONFORMITY
Hereby, Bresser GmbH declares that the equipment type with part number: 7009994 is in compliancewith Directive: 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.bresser.de/download/7009994/CE/7009994_CE.pdf