ATOLL ELECTRONIQUE AM100 Sig Signature Power Amplifier Owner’s Manual

ATOLL ELECTRONIQUE AM100 Sig Signature Power Amplifier

• You have just bought an amplifier with exceptional audiophile performance.
• We thank you for your confidence in our products.
• To get the best part of your amplifier, please read carefully this manual.

YOU WILL FIND ENCLOSED

• A power amplifier AM100 Signature.
• One power cord.
• This manual with the warranty certificate.

CAUTIONS

• Do not make any connections when your device is powered on.
• Put your amplifier in a dry and well-ventilated place, far from the source of heat.
• Do not put something on your amplifier.
• Avoid any shortcuts.
• Respect polarity + &- and switch left & right:
• Do not plug in two speakers in parallel on the same output.

ADVICE

• To optimize the performance of your device, you should switch it on at least half an hour before any listening, the time for the power stage to reach its ideal working temperature.
• Your device will give you optimal listening quality after this time-lapse.
• Between two uses, it is, therefore, preferable to let the device on so that it remains at its optimum temperature.
• At night or when you leave your home, it is best to use the main switch to turn off the device.
• To optimize the sound quality of your system, we recommend that you choose good-quality connection cords. Do not hesitate to ask your specialist dealer for advice.
• Your Amplifier is equipped with a temporised switch on. A relay protects loudspeakers on the output power stage from over-voltage.

CONNECTING

1. Amplifier input.
2. Amplifier output (to another power amplifier for bi-amp).
3. Right channel output.
4. Trigger 12V input(1).
5. Left channel output.
6. General power plug and ON/OFF switch (with internal fuse)
   • Trigger input: This input allows the control ON/OFF of your amplifier simultaneously to any device with a 12V Trigger outlet.
   • So that the system is operating, the ON/OFF button of your Amplifier must remain in position OFF (0).
   • If the switch is in the ON position (I), the amplifier will work but not the Trigger function.
   • The trigger cable must be a Male-to-male stereo jack plug Ø 3,5 mm (1/8”).
   • DETAILS OF FUNCTIONS
7. Power indicator led.

(Configuration: 1 Preamplifier and 2 mono amplifiers).

MONO BRIDGE MODE

• Warning: for the AM100 Signature, bridged mono mode is not recommended on speakers with an impedance of less than 6 Ω.
• Warning: for the AM100 Signature, bridged mono mode is not recommended on speakers with an impedance of less than 6 Ω.
• Warning: be sure that your amplifier is unplugged and that no other appliance is plugged in during this operation.

E.C. MARKING

E.C. marking certified the conformity with low tension directive 73/23/CEE, directive CEM 89/336/CEE and national transpositions.

WARRANTY CONDITIONS

• ATOLL ELECTONIQUE warranty is two years period from the date of purchase; the date and stamp of the seller being authentic. We recommend you keep your proof of purchase (invoice).
• The warranty, as well as the terms of service, should be specified at the time of purchase by your dealer who will advise you, in case of faulty behaviour or failure.
• This warranty covers labour and replacement of parts acknowledged to be faulty and not the normal wear and tear caused.
• Devices with traces of disassembly, drop, immersion, abnormal voltage or any cause of degradation and damage resulting from a contrary use of the indications included in this owner manual, automatically lose the benefit of the guarantee.

CLEANING

Before any cleaning, switch off your appliance. Use a soft and dry rag to clean up the device. Never use acetone, white-spirit, ammoniac, or any kind of product containing an abrasive agent. Never try to clean up inside the appliance.

TECHNICAL DATA

• Power: 100 W /ch. /8Ω 140 W /ch. /4Ω
• Impulse power: 180 W /ch.
• Supply: 2×340 VA
• Total of   capacitors: 32 247 µF
• Number of inputs: 2
• Switch OFF consumption: 0 W
• ON consumption: 11 W – 500 W
• Input impedance: 47 kΩ
• Sensibility: 1,77 V
• Signal/Noise ratio: 100 dBA
• Distortion at 1kHz: 0,05% / (10 W)
• Bandwidth: 5 Hz – 100 kHz
• Rising time: 1,3 µs
• Dimensions: 440×291×95 mm
• Weight: 11 Kg

TROUBLESHOOTING

Problem encountered Possible solutions

• The power-on indicator does not light up.
• The main switch (6) is in the wrong position.
• The power cord is not properly connected.
• Check the fuse in the general power plug (6).
• One of the speakers remains silent
• Check the quality of the connections between the amplifier and the speaker in question.
• Check the quality of the connections between the preamplifier and the amplifier.

WARRANTY FORM ~ AM100 Sig

• To present to your dealer the invoice when returning the appliance:
• ATOLL ELECTRONIQUE®
• Bd des Merisiers 50370 BRACEY FRANCE
• Date of purchase:—————————-
• Place of purchase:——————————
• Buyer signature:——————————–
• www.atoll-electronique.com

Documents / Resources

| ATOLL ELECTRONIQUE AM100 Sig Signature Power Amplifier [pdf] Owner's Manual
AM100 Sig Signature Power Amplifier, AM100 Sig, Signature Power Amplifier, Power Amplifier, Amplifier
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>