70mai Cordless Portable Car Vacuum Cleaner Swift User Manual
- June 13, 2024
- 70mai
Table of Contents
70mai Cordless Portable Car Vacuum Cleaner Swift
Product Introduction
Please read this manual carefully and keep it in a safe location before using the product
Product, accessory, and other images in this manual are schematic illustrations only and are intended for reference purposes Act, accessory and other images in this manual are schematic illustrations only and are intended for reference purposes only. The product may be updated or upgraded and may appear different from the schematic illustrations.
Charging the Product
Before using the device for the first time or after a long storage period, please ensure that the product is fully charged (fully charge the device once every 3 months).
- Connect the power cable to the vacuum cleaner’s Type-C port;
- Connect the other end of the power cable to a car or household charger to begin charging;
- When the battery indicator lights blink in sequence, the device is being charged; when all three indicator lights stay on, the device is fully charged.
The device cannot be operated while it is being charged. Remove the power cable to use the device. it to a car or household charger that supports 5V/2A. SV/3A or 0C3.0.
Using the Product
Before using the device, please ensure that all parts have been assembled securely and that the device is sufficiently charged.
- Pull out the dust cover.
- Press the power button to turn on the device. When the indicator lights turn on, the device is ready for use.
- Using the device, press the power button again to turn it off.
- indicator lights: Fully charged
- indicator lights: Moderately charged
- indicator light: Low battery, please charge the device soon
- Blinking indicator light: The battery is running out soon, please charge the
Note to not shake the vacuum cleaner with force while it is in operation. Remove any clog at the nozzle immediately to prevent damage to the
Accessory
The product comes with a brush attachment and a flat attachment for different
uses.
Cleaning the Product
To ensure normal operation, periodically change the HEPA filter and empty and clean the dust holder regularly.
-
Remove the dust holder.
-
Remove the HEPA filter and clear turning it counterclockwise. the dust holder.3. Use a brush or a piece of tissue paper or wet tissue to clean the dust holder.
-
If necessary, wash the dust holder with water and dry it before use.
-
Do not wash the HEPA filter. Use a brush or a piece of tissue paper to clean it instead.
Note For a better user experience, please replace the HEPA filter whenever it gets too dirty or at regular intervals. It is recommended to replace the liter at least once part three man. -
Refer to Step 1. Align the clips on the dust holder with the device and Turn the dust holder clockwise to secure it.
Replacing the HEPA Filter
Pinch the horizontal beam and turn counterclockwise to remove the cover.
Change the HEPA filter inside and secure the cover by turning it clockwise.
Troubleshooting
Notes
This product is not waterproof. Do not use it to clear water spills or other
fluids. In order to prevent damage to the device and the HEPA filter, do not
use the device to clear high-temperature materials (such as cigarette butts,
match sticks, or hot ashes), sharp objects (such as glass, nails, pins, etc.),
dangerous substances (such as solvents, descaling agents, etc.), chemical
substances (such as acidic substances, detergents, etc.), or flammable liquids
(such as gasoline and alcohol). Please check the dust holder regularly. Clear
the dust holder and replace the HEPA filter regularly to prevent clogging of
the HEPA filter which may result in poor cleaning performance, heating of the
device, and shorter service life.
In case of any power leakage, overheating, or abnormal noise during operation, turn off the device immediately. Do not attempt to service the device yourself. Contact the company’s aftersales department for assistance. Do not put the vacuum cleaner near fire, heat, or under direct sunlight to prevent fire accidents. Do not remove the dust holder while the device is in operation to prevent personal injuries and damages. This product is not recommended for use by persons with physical, sensory, or intellectual impairments or persons who lack related experience or knowledge unless supervised or instructed by someone. Please keep the product in a safe location and out of reach of children. Do not let children play with the device. Do not alter, repair or replace the battery on your own. Do not leave the product charging for too long without any supervision. The maximum charge time is not more than 12 hours.
Technical Specifications
- Product name: 70mai Vacuum Cleaner Swift
- Max suction: around 5,000Pa
- Dust holder capacity: 100ml
- Battery capacity: 7.4V 4,000mAh (29.6Wh)
- Input: SV= 2A
- Packing List
- 70mai Vacuum Cleaner Swift × 1
- Flat attachment x 1
- User manual x I
- Model number: Midrive PV01
- Net weight: 700g
- Rated voltage: DC 7.4V
- Rated power: 80W
- Battery life: around 24 minutes
- Power cable x 1
- Bauch attachment y
- Storage bag X 1
Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and this device must accept any interference received, including
interference that may cause undesired operation Service:
help@70mai.com For further information, please go to
www.70mai.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>