70mai RC11 Rear Camera User Manual

: June 1, 2024
: 70mai

Table of Contents

Dear customer
Product Overview
Functions
Usage
Precautions
Installation
Specifications
Warranty Conditions
EU Declaration of Conformity
WEEE
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

70mai RC11 Rear Camera

70mai RC11 Rear Camera

Dear customer

Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

Product Overview

Please read this user guide carefully before using the product and keep it in a safe place..

Rear camera
Mount
Rear camera lead wire
Joint (Port A)
Joint (Port B)
Rear signal wire
Mini USB 8pin power port

Note. Illustrations of the product, accessories, and user interface in the user manual are for reference purposes only. The actual product and functions may vary due to product enhancements.

Functions

The rear camera is used as an accessory for 70mai in-car products and needs to be used with a main device.

After the rear camera is installed and connected with the main device correctly, when rear camera recording is enabled, the rear camera can record and store the image from the rear of the vehicle.

Usage

The rear camera is powered by the main device. When the main device starts operation, the rear camera will turn on automatically. When the main device turns off or sleeps, the rear camera will also turn off automatically.
The main device powers the rear camera only when the main device receives power from an external power source. The main device cannot power the rear camera if it is not powered by the external power source.
The image acquired by the rear camera is stored in the microSD card of the main device automatically. As the storage limit is reached for the microSD card, the earliest front-recorded and rear-recorded images will be overwritten by the latest images and deleted in turn cyclically.

Precautions

Please employ a professional technician for the installation. The manufacturer shall not be liable for improper personal operation that causes issues such as short circuit of car power source, damages to the car battery, damage to the car interior, and the like.
The manufacturer shall not be liable for damages due to installation, rather than quality issue of the product itself.
The manufacturer shall not be liable for failed normal use of this product that is not resulted from quality issue of the product.
During installation and use of the product, please do not insert or remove the rear camera while the power is on, otherwise the product may be damaged.

Installation

First, install the electrostatic sticker. Clean your rear windshield and put the electrostatic sticker on the recommended upper area of the windshield, as shown in the picture. Press the sticker to remove air bubbles out.

Second, install the rear camera. Paste the rear camera onto the electrostatic sticker.

Next, connect the power supply. Connect the rear camera with the rear signal wire (connect ports A and B together). Run the wire along the top of the rear windshield, C-pillar, top of the side windows, to the main device. Plug the Mini USB 8pin power port into the main device (the AV/IN port of the main device).
Note: The installation and wiring methods for different vehicles may differ from what described in the user manual. The installation shall be conducted by a professional technician.

Installation

Finally, adjust the camera angle. Turn on the main device and switch to rear camera recording mode. Adjust the camera angle based on the preview screen to ensure that the camera is facing the back of the vehicle.

Specifications

Product	Rear camera
Model	RC11, RC12
Resolution	1920×1080
Input	5V ⎓ 0.5

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries, etc.).
Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

Symbol The manufacturer hereby declares that this equipment is in compliance with the applicable Directives and European Norms, and amendments. The full text of the EU declaration of conformity is available at the following internet address: https://help.70mai.asia/1193.html.

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.