Oster 078006 Heavy-Duty Detachable Blade Clipper Instruction Manual

Oster 078006 Heavy-Duty Detachable Blade Clipper

Product Information

This Heavy-Duty Detachable Blade Clipper is designed to provide excellent cutting performance. It is a 3-speed clipper that has been thoroughly tested and inspected at every stage of its manufacturing and assembly to ensure optimum performance and durability. The clipper is equipped with a detachable grounding-type 3-wire power-supply cord to reduce the risk of entanglement or tripping.

Product Usage Instructions

1. Before using the clipper, read the entire instruction manual.
2. Ensure the clipper is unplugged before cleaning, putting on, or taking off any parts.
3. Do not use the clipper while bathing or in a shower.
4. Keep the clipper away from water or other liquids.
5. Always unplug the clipper from the electrical outlet immediately after use.
6. Supervise children or individuals with disabilities when using the clipper.
7. Use the clipper only for its intended purpose as described in the manual. Do not use any attachments not recommended by the manufacturer.
8. If the clipper is not working properly, has been dropped or damaged, or dropped into water, return it to a service center for examination and repair.
9. Keep the cord away from heated surfaces and avoid wrapping it around the unit when storing.
10. Avoid contact with moving blades to prevent injuries.
11. Follow the lubrication instructions provided in the manual to ensure optimum performance and prolong the life of the clipper.
12. Use lower speed settings to limit blade heat and reduce wear.

Please save these instructions for future reference.

IMPORTANT SAFEGUARDS

DANGER Commercial Clipper

When using an electrical appliance, read all instructions before use.

To reduce the risk of electric shock:

1. Do not reach for an appliance that has fallen into water. Unplug immediately.
2. Do not use while bathing or in a shower.
3. Do not place or store appliance where it can fall or be pulled into a tub or sink.
4. Do not place in or drop into water or other liquid.
5. Always unplug this appliance from the electrical outlet immediately after using.
6. Unplug this appliance before cleaning, putting on or taking off parts.

WARNING Commercial Clipper
When using an electrical appliance, read all instructions before use.

To reduce the risk of burns, fire, electric shock, or injury to persons:

1. An appliance should never be left unattended when it is plugged in.
2. Close supervision is necessary when this appliance is used by, on, or near children or invalids.
3. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
4. Never operate this appliance if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to a service center for examination and repair.
5. Keep cord away from heated surfaces.
6. Never drop or insert any object into opening.
7. Do not use outdoors or operate where aerosol spray products are being used or where oxygen is being administered.
8. Do not use this appliance with a damaged or broken comb or blade, as cut or scratched skin may occur.
9. To disconnect, move all controls to “OFF”, then remove plug from outlet.
10. Do not wrap cord around unit when storing. Continuous stress on the cord can damage cord insulation and result in a shock hazard.
11. Avoid contact with moving blades.
12. Avoid tangling or kinking the cord while clipping. Should the cord become tangled or kinked, stop clipping and straighten the cord.
13. This appliance is for clipping and trimming purposes only.
14. Keep the appliance dry.
15. The intended continuous operating time is 20 minutes.
16. During use, do not place or leave the appliance where it is expected to be: subject to damage by animal, or exposed to weather.
17. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

SAVE THESE INSTRUCTIONS

A detachable grounding-type 3-wire power-supply cord is used to reduce the risk resulting from becoming entangled in or tripping over a longer cord. Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use. If a longer detachable power-supply cord or extension cord is used:

• a) The marked electrical rating of the grounding-type 3-wire cord set or grounding type 3-wire extension cord should be at least as great as the electrical rating of the appliance; and
• b) The complete cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally.

DO NOT TAMPER WITH CLIPPER

ABOUT YOUR CLIPPER
Although your clipper has been thoroughly tested and inspected at every stage of its manufacturing and assembly, it is recommended that you lubricate it, as instructed in this manual. This will ensure you obtain optimum performance and prolong the life of your clipper.
This is a 3 speed clipper that has been developed to provide excellent cutting performance on any speed. Using lower speed settings will limit blade heat and reduce wear.

GETTING FAMILIAR WITH YOUR CLIPPER AND ACCESSORIES

Your clipper comes to you with several parts and accessories. Confirm that they are all present and are not damaged. All parts can be purchased from an Oster™ authorized service center.

Due to continuous product improvement, product may vary slightly from what is illustrated.

TAKING CARE OF YOUR CLIPPER

Note: Any other maintenance not explained in this manual must be performed by an Oster™ Authorized Service Center.
Important: Make sure clipper is turned off and unplugged from electrical outlet before removing, replacing or cleaning any part.

Removing Blade Assembly from the Clipper

Push locking button

1 (078006 Model ONLY) in and hold. Push blade assembly 2 upwards to position 3 Blade assembly can now be removed from clipper by pulling forward and upwards at 4 before removing, replacing or cleaning any part.

WARNING
When pushing the blade assembly back into the clipper it must be inserted with the smooth side of the blade facing upwards. If the blade is not positioned with the correct side facing upwards, damage to the clipper or injury may result.

BLADE CARE

Blade Care, Cleaning and Lubricating-Daily
Blades should be oiled regularly to reduce heat and maintain sharpness. Before removing the blade, be sure it has cooled down.
With clipper in off position apply 1 or 2 drops of Oster™ Clipper and Blade Lube™ oil on the blade. Wipe excess oil with a dry, soft cloth. Cleaning
Clean the excess hair from your blades by using the cleaning brush.

MAINTENANCE

To clean the blades, plug clipper into electrical outlet and turn on. In a shallow pan, immerse blade teeth into Oster™ Blade Wash™ cleaning solution.
Caution: DO NOT IMMERSE THE CLIPPER.
Remove blade from cleaning solution and while holding clipper blade end down, wipe the blades with a dry, clean cloth.

If after cleaning, you find that the blades still do not cut properly, it is possible that a few fine pieces of hair are still trapped between the blades.

If this occurs, remove the blade. Without loosening the tension springs screws, slide the upper blade to one side but not completely out from under the tension spring.
Wipe the surface between the blades clean with a dry cloth.

Place a drop of oil on the mating surfaces and in the tension spring guide slot. Slide upper blade to the other side and repeat process 1. Slide the upper blade back into position and reassemble the clipper. With the clipper running, lubricate the blades with a light coat of Oster™ Kool-Lube™ lubricant or a drop or two of Oster™ Premium Lubricating Oil. Sharpening
Oster™ cutting blades are of individual hollow-ground design, hardened to extend cutting life. As with any cutting tool, the cutting edges will become dull after extensive use. If sharpening is necessary, send blades to an Oster™ Authorized Service Center.

Storing Your Clipper
Store your clipper in a clean, dry space. Be careful not to tangle the cord while storing the clipper. Do not wrap cord around the clipper when storing. This can damage the cord insulation.

AVAILABLE OSTER™ CLEANERS AND LUBRICANTS

Regular use of the following products will help you enjoy optimum performance from your clipper and prolong its functionality.

removes dirt buildup trapped between upper blades.
Clipper & Blade Lube™ Oil| 076300-104| Lubricates between upper and lower blades to keep them sharper longer and produce a smoother clipping action.

Waste Disposal

This marking indicates that this product should not be disposed with other household waste throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling.

WARNING
When using or cleaning this clipper, do not use any non Oster™ approved aerosol sprays or blade washes, especially those containing methylene chloride, dimethyl benzyl ammonium chloride, or 1-1-1 trichloroethylene. Damage caused by these chemicals will void your warranty. You may use Oster™, Blade Wash™ cleaner and Oster™ Blade Lube™ oil, which do not harm the product.

SERVICE INFORMATION

How and Where to Get Service
INFORMATION • DO NOT DESTROY • READ CAREFULLY
The foundation of our business has been built upon the principle of service to the user, both in designing superior products and in keeping them in condition to give long-lasting use. That is why we back up our reputation for manufacturing top-quality products by providing the finest service facilities possible for adjustment and repairs, when necessary. Please retain the original packaging materials and carton, if possible, to facilitate the packaging of the product if service is required.

HOW TO GET SERVICE WHEN YOU NEED IT

To locate your closest distributor, please go to:
WWW.OSTERSTYLE.COM / WWW.OSTERPRO.COM

1. Once you have located a Service Station, take your product there. To make packaging the product easier, use the original packaging materials and carton if you have them.
2. If it is necessary to ship the unit to the Service Station:
   • a. Pack it carefully in a good carton with plenty of crumpled paper or other padding around it. Tape or tie the carton securely.
   • b. The warranty does not cover damage in transit. Carefully address the package to the nearest Service Station. Don’t forget your name and return address, including postal zip code.
   • c. Your Post Office will tell you the proper amount of postage and can insure the package against loss.
3. If returning a clipper, include blades.
4. When ordering Parts or Accessories specify the Service number (or Model No. and the Series Letter) indicated on your product.

LIMITED WARRANTY

This product is warranted for one year from date of purchase to be free
of mechanical and electrical defects in material and workmanship. The manufacturer’s obligation hereunder is limited to repairing such products during the warranty period, provided the product is sent prepaid to an Authorized Service Station. This warranty does not cover normal wear of parts or damage resulting from any of the following: Negligent use or misuse of the product, normal wear and tear, damage, Acts of God, use on improper voltage or current, use contrary to operating instructions, or disassembly, repair or alteration by any person other than an Authorized Service Station. Return of the Owner Registration Card is not required for warranty coverage. This warranty gives you specific legal rights and you may also have other rights which vary from state to state, province to province or jurisdiction to jurisdiction. No other warranty is provided and to the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose is limited to the duration of this warranty and the company shall not be responsible for incidental or consequential damages.
In accordance with the European Directives on Low Voltage (73/23/EEC as amended by 93/68/EEC) and Electromagnetic Compatibility (89/336/EEC as amended by 93/68/EEC), the CE-marking has been affixed on the equipment. The following importer and distributor keeps the conformity declaration on file: Am Eisernen Steg 20, D-65795 Hattersheim am Main, Germany.

info@oster-europe.com
phone +49 (0) 6190-93443-0.

For live customer service, please contact:
Europe, Africa and Middle East:
Oster GmbH
info@oster-europe.com
+49 (0) 6190-93443-0
For your local Oster™ authorized distributor Please visit our web site at:
www.osterpro.com
www.osterstyle.com

© 2012 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions.
All rights reserved. Distributed by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, Miami, Florida 33126.
Printed in USA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>