Oster BLSTTS-CB2-000 Pro Blender User Guide

: June 3, 2024
: Oster

Table of Contents

Oster BLSTTS-CB2-000 Pro Blender
Specifications
Introduction
IMPORTANT SAFEGUARDS
PLUG INSTRUCTIONS
USING YOUR BLENDER
How to scan QR Code
Frequently Asked Questions
Video
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

Oster

Oster BLSTTS-CB2-000 Pro Blender

Oster-BLSTTS-CB2-000-Pro-Blender-Imgg

Specifications

PRODUCT DIMENSIONS: 2 x 13.6 x 10.35 inches
ITEM WEIGHT: 45 pounds
SPECIAL FEATURE: Manual
CAPACITY: 4 Pounds
MATERIAL: Stainless Steel
STYLE: Texture Select Pro Blender
VOLTAGE: 220 Volts
BRAND: Oster

Introduction

This Oster blender’s cutting-edge Texture Select Settings take the guesswork out of achieving the ideal consistency for your blends. With the help of Texture Select technology, you can select the thickness of anything from chunky salsa and creamy smoothies to fine soups and juices, and everything in between. This strong Oster blender features Dual Direction Blade Technology, a 6-point stainless steel blade design, and 1200 peak watts of blending power. Smoothies, shakes, and salsas are automatically made using three preset settings, and manual settings offer even more flexibility and control. The blender also comes with 2 handy Blend-N-Go cups, an 8-cup durable Tritan jar, and a dishwasher-safe lid.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons including the following:

Read all instructions before using this product.
To protect against electric shock, do not place or immerse cord, plugs, or appliance in water or other liquid.
This appliance is not intended for use by children or by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge. Close supervision is necessary when any appliance is used near children. Children should be supervised to ensure that they do not play with the appliance. Keep the appliance and its cord out of reach of children.
Never leave appliance unattended when in use.
Unplug from outlet when not in use, before putting on or taking off parts and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning. To disconnect, turn any control to OFF, then unplug power cord from outlet. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
Avoid contacting moving parts.
Flashing light indicates ready to operate (models with stand-by mode). Avoid any contact with blades or moveable parts.
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Do not attempt to replace or splice a damaged cord. Return appliance to the manufacturer (see warranty) for examination, repair or adjustment.
For appliances with markings on plug blade: This appliance has important markings on the plug blade. The attachment plug or entire cordset (if plug is molded onto cord) is not suitable for replacement. If damaged, the appliance shall be replaced.
The use of attachments, including canning jars, not recommended or sold by the manufacturer may cause fire, electric shock or injury.
Do not use outdoors or for commercial purposes.
Do not let cord hang over edge of table or counter, or touch hot surfaces, including the stove.
Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or damage to the blender. A scraper may be used but must be used only when the blender is not running.
Blades are sharp. Handle carefully, especially when removing the blades from the container, emptying the container and during cleaning.
To reduce the risk of injury, never place cutter-assembly blades on base without jar properly attached.
Always hold container while operating the appliance. If the container should turn when the motor is turned ON, switch appliance OFF immediately and tighten the container in the threaded bottom.
Always operate blender with cover in place. Always wait until all moving parts have stopped before removing any lid or cover.
When blending hot liquids, remove center piece of two-piece cover (if a two-piece cover is provided). Beware of steam. Do not blend boiling liquids.
Do not use appliance for other than intended use. Misuse can cause injuries. Always use appliance on a dry, stable, level surface. Never fill beyond the MAX fill line.
For containers with no lids or vents (when inserted in the blender), such as personal Blend and Go containers:
Do not blend carbonated, hot or boiling liquids and ingredients, as this may create pressure buildup. Only blend non-carbonated liquids and ingredients that are at room temperature or cooler. If the container is warm to the touch, allow to cool before opening.
Do not use the blender for longer than 1 minute at a time to avoid heat and pressure buildup. Allow to cool for 1 minute between cycles.
For appliances with food processor or food chopper attachments
Keep hands and utensils away from moving blades or discs while processing or chopping food to reduce the risk of severe injury to persons or damage to the food processor or chopper. A scraper may be used but must be used only when the food processor or chopper is not running.
To reduce the risk of injury, never place cutting blade or discs on base without first putting container properly in place.
Be certain cover is securely locked in place before operating appliance.
For food processors: Never feed food by hand. Always use food pusher.
Do not attempt to defeat the cover interlock mechanism.

PLUG INSTRUCTIONS

North American models with polarized plugs:

POLARIZED PLUG

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way. If the plug fits loosely into the AC outlet or if the AC outlet feels warm do not use that outlet.

North American models with grounded plugs:

GROUNDED PLUG

To reduce the risk of electric shock, this appliance has a grounding type cord and plug Contacto a tierra that has a third grounding pin (3-prong plug).

The plug must be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances. If the plug does not fit into the outlet or if in doubt as to whether the outlet is properly grounded, contact a qualified electrician to install the proper outlet. Do not alter the plug in any way.

CLEANING AND USER MAINTENANCE: Cleaning before first use is recommended. CAUTION: Unplug before cleaning. Do Not Immerse the blender base in water or any other liquid.

Use a damp, soft sponge with mild detergent to clean the outside of the blender base. All parts except for the blender base are dishwasher-safe. You can also wash the parts in warm, soapy water. Rinse well and dry.

Note
This appliance has no user serviceable parts. Any servicing beyond that described in the Cleaning Section should be performed by an Authorized Service Representative only. See warranty available online.

USING YOUR BLENDER

Turn jar upside down so the small opening is at the top. Then place sealing ring over jar opening.
Place blade into jar.
Place threaded jar nut or threaded jar skirt over blade and jar (Note: If there are slots on top of collar, line them up with notches on jar.) Place the threaded jar nut or threaded jar skirt on jar and turn it clockwise to tighten.
Place jar assembly onto base.
Line up tabs of jar with tabs on blender base. Make sure the tab of the jar on the left side is in the back of the tab of the blender base and the tab of the jar on the right side is in front of the tab of the blender base. Make sure jar is seated into position.
Place ingredients into jar and place lid with feeder cap on jar.
Plug the power cord into an electrical outlet.
Push desired speed and blend ingredients to desired consistency.
Press OFF to stop the blender.

NOTE

To use PULSE, push PULSE and hold down for desired length of time. Release PULSE and allow blade to stop. Repeat cycle as desired.

CAUTION
ALWAYS PLACE HAND ON CONTAINER COVER WHILE OPERATING BLENDER.

For further details please visit www.oster.com/instruction- manuals.html

For product questions contact customer service 1.800.334.0759

Sunbeam’s limitation of liability: Sunbeam Products, Inc. (“Sunbeam”) shall not be liable for any incidental or consequential damages caused by the breach of any express, implied or statutory warranty or condition. Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a particular purpose is limited in duration to the warranty set forth at www. oster.com/instruction-manuals.html. Sunbeam disclaims all other warranties, conditions or representations, express, implied, statutory or otherwise. Sunbeam shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use the product including incidental, special, consequential or similar damages or loss of profits, or for any breach of contract, fundamental or otherwise, or for any claim brought against purchaser by any other party. Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights that vary from province to province, state to state or jurisdiction to jurisdiction.

Scan for operating instructions, and warranty details.

How to scan QR Code

Open your camera app or QR Code scanning app.
Position your phone so the QR Code appears in the viewfinder.
Link will appear at the top.

Or you can visit: www.oster.com/instruction- manuals.html

(Your model number can be found on the bottom of your blender.)

Frequently Asked Questions

The Jar is made of glass or plastic?

The 8-cup, BPA-free, dishwasher-safe Tritan plastic jar that comes with this Oster blender is strong and long-lasting.

Is the rubber gasket detachable so that it can be cleaned to eliminate bacteria

The rubber gasket is indeed detachable. You can either wash it in warm, soapy water or put it in the dishwasher’s bottom basket.

What are the blender’s dimensions, including the base and the jar? 11.20×13.60×10.35, which are the reported dimensions, don’t make sense.

This blender measures 11.8″ L x 11.25″ W x 14″ H.

Is it audible?

Rest assured that the noise produced by all of our blenders is tolerable and normal for a blender.

How uniform are the outcomes? Trying to avoid using a lot of water when making curry or sauce bases that contain coconut, onion, etc. Need a cream soup-like texture.

With a 1200 watt motor, this blender is strong and will produce smooth sauces and soups.

Can you use this blender with the oyster milk shake blade?

The Oster Select Settings Pro Blend blade and the milk shake blade are not the same.

Why won’t my Oster blender mix?

In this instance, the thermal fuse turned on and shut off the blender to allow it to cool. Leave the device unplugged for 15 minutes. This ought to reset the fuse and enable blending once more.

Why won’t my Oster blender power on?

Before checking to make sure the power cord is properly plugged into an operational power outlet, make sure your blender is turned off. If the blender was not previously plugged into a power source, do so now. Once it is properly plugged in, turn the blender on and use it as directed.

What causes the Oster blender to blink?

A blinking light means the blender is ready to use. Avoid ALL contact with the moving parts or blades. To lessen the chance of injury or damage to the blender, keep your hands and other objects out of the jar while you blend.

Why doesn’t my blender blend despite spinning?

The base needs to be tightened as a fix. If this doesn’t fix the issue, check the gasket and replace it if necessary. Examine the assembly socket that the drive stud fits into if it turns but the blade assembly isn’t.