Vertys Solar Group BS20 EV Wallbox Wall-Mounted Charger User Manual

Vertys Solar Group BS20 EV Wallbox Wall-Mounted Charger

Product Information

• Product Name: EV Wallbox
• App Version: BS20
• Power: 0.00kW
• Voltage: Amount kWH
• Duration: Temp 31.8
• Current Charging Setting: Charging Mode Max current
• Auto Full Charge: 32/32A
• App: B01-0003-0005 EVSEMaster (Available for iOS and Android)

Installation Guides

• Mode C Installation Guide: Scan here to check the quick installation guide.
• Mode A Installation Guide: Scan here to check the quick installation guide.

Instructions for Use

1. Make sure the wall box is connected to power.
2. Distribution Box
3. Charging Station Button
4. Hook Charging Cable
5. Connect the EV and the wall box with the EV charging cable.
6. Press the middle button of the wall box to start/stop charging.

Product Usage Instructions

1. Make sure the wall box is connected to power.
2. Attach the wall box to the distribution box.
3. Locate the Charging Station Button and Hook on the wall box.
4. Connect the EV and the wall box using the EV charging cable.
5. Insert the plug into the socket.
6. Press the middle button of the wall box to start or stop charging.

Security Warning:

Non-compliance with the operating instructions can cause serious consequences. The manufacturer does not assume any liability for damage caused by disregarding operating instructions or other warnings marked on the device. High voltage and fire hazard! Never use the device if the housing is damaged or opened! This product is not suitable for people with limited mobility, sensory or psychological disabilities, and those who lack use experience or a certain degree of knowledge.

Note:

• Before powering on the device, ensure proper grounding to avoid accidents.
• If a ground fault occurs, assume the cable carries voltage. Ensure no high-voltage power is present before inspecting the device.
• Insulate exposed metal parts of tools to prevent them from touching the metal frame, causing a short circuit.
• Maintain a clean environment with stable temperature and humidity for optimal charging station operation.
• Avoid using the charging station in flammable environments or environments with volatile gas.
• Keep the power cord away from heated surfaces and avoid placing it in gaps or pulling it across sharp edges or corners.
• Do not use the charger when the inside of the charging plug is wet.
• Do not modify, retrofit, or change any part by yourself. Do not use the product as a toy.
• Ensure children do not play with the device or put their fingers into the charging connector when the power plug is connected.
• The circuit to which the charger is connected must be equipped with a residual current circuit breaker.
• Do not use the device for purposes other than electric car charging. Do not attempt to disassemble the device yourself, as it may damage internal parts and void after-sales service.

You can scan here to download the EVSEMaster APP.

Mode C Installation Guide

Mode C

• Phase Mode : Single / Three Phase
• Installation Method : Wall/Stand
• Mode C ( with plug )
• Certificate : CE
• lP Rating : IP66
• Rated Voltage : 230V~400VAC+10% 50Hz±10%
• Rated Current : 16/32A
• Maximum Power : 3.84/7.68/11/22kW
• Operating Temperature : -25℃～55℃
• Enclosure Material : ABS+PC alloy
• Start Mode : Button (default)
• Warranty : 1 Year

Instruction for Use
Make sure the wall box is connected to the power

Scan here for the user manual and FAQ.

Mode A Installation Guide

Mode A

• Phase Mode : Single / Three Phase
• Installation Method : Wall/Stand
• Mode A ( with socket )
• Certificate : CE
• IP Rating : IP66
• Rated Voltage : 230V~400VAC+10% 50Hz±10%
• Rated Current : 16/32A
• Maximum Power : 3.84/7.68/11/22kW
• Operating Temperature : -25℃～55℃
• Enclosure Material : ABS+PC alloy
• Start Mode : Button (default)
• Warranty : 1 Year

Instruction for Use
Make sure the wall box is connected to the power

Scan here to check the quick installation guide

Welcome to use your BS20 wall box

Security Warning

ATTENTION: Non-compliance with the operating instructions can cause serious consequences. The manufacturer does not assume any liability for damage caused by disregarding operating instructions or other warnings marked on the device. High voltage, fire hazard! Never use the device if the housing is damaged or opened! This product is not suitable for people with limited mobility, sensory or psychological disabilities, and those who lack use experience or a certain degree of knowledge.

IMPORTANT SAFETY INSTRUCTIONS WARNING!

• This product should only be installed, repaired, or maintained by authorized electricians and by national guidelines for electrical installations. All applicable local, regional, and national regulations for electrical installations must be respected.
• Regularly check if the charger has visible damage. Do not use a damaged product.
• Make sure that all safety facilities and connections are available, properly installed, and undamaged at all times and are tested regularly to ensure they can operate normally.
• Make sure that the input voltage, frequency, circuit breakers, and other conditions of the device meet the specifications before the device is powered on. It’s important to observe the maximum permissible charging current of the connection.
• Before powering on the device, please confirm that the device is properly grounded to avoid unnecessary accidents. If a ground fault occurs, it is assumed that the cable carries voltage. Please make sure there is no high-voltage power in the system before inspecting the device.
• Please insulate the unnecessarily exposed metal parts of all tools to prevent them from touching the metal frame, which may cause a short circuit.
• To ensure the service life and stable operation of the charging station, the operating environment should be kept as clean as possible with a relatively stable temperature and humidity. The charging station must not be used in flammable environments or environments with volatile gas.
• Please keep the power cord away from the heated surface. Please do not put the power cord in the gap of the closed door or pull it out of sharp edges or corners.
• Do not use the charger when the inside of the charging plug is wet.
• Do not modify, retrofit, or change any part by yourself under any circumstances.
• Please do not use this product as a toy. Please take good care of children to ensure that they will not play with this device as a toy nor put fingers into the charging connector when the power plug is still connected.
• The circuit to which the charger is to be connected must be equipped with a residual current circuit breaker.

NOTE: Please do not use it for other purposes except electric car charging. Do not try to disassemble the device by yourself under any circumstances. Otherwise, the internal precision parts may be damaged, and you will not be able to apply after-sales service.

2022 EVSE Inc. All rights reserved.
MANUFACTURER
Nanjing Shenqi Electronic Technology Co., Ltd.86-180-6144-0913 service- department@evse.com 2nd Floor， Building 4, Minghui Technology Park, No.9 Zhongxing West Road， Lishui District, Nanjing, China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>