TTCombat TTSCW-SFU-143 M.U.L.E Office User Guide
- June 13, 2024
- TTCOMBAT
Table of Contents
TTSCW-SFU-143 M.U.L.E Office
Product Information
The product is the TTSCW-SFU-139 Mule: Office, which is a roof
topper designed for office use. It comes with multiple parts that
need to be assembled according to the provided instructions.
Product Usage Instructions
-
Before starting the assembly, carefully review the provided
icons throughout the instructions to understand their
meanings. -
Do not glue the specified part mentioned in the
instructions. -
Carefully score and fold the specified part as instructed.
-
The placement of a specific part may be optional, so pay
attention to the instructions. -
Take a close look at each step to ensure the correct process
order and part usage. -
If instructed, repeat the process of making a specific part for
the specified number of times. -
Some instruction steps may be the same assembly as before but
from a different angle. -
Once a sub-assembly is complete, it is ready to be added to the
main kit. -
Continue following the instructions until the assembly is
complete. There might be more optional parts, so check all the way
to the end of the instructions. -
Be cautious with fragile parts labeled “DO NOT BEND.” These
parts are designed to curve around a specific frame only. -
Pay attention to highlighted long strips that are similar to
other parts. The slimmer one is required in those cases. -
Before gluing a part in place, refer to the following steps as
it might be a multi-part process for aligning. -
Take note of any highlighted parts that are thicker than
similar pieces used previously. -
Do not glue doors to the frame. This allows for open or closed
positions. -
Open positional is optional for certain steps.
-
Circled parts should be placed on the outside.
-
Some white/yellow colored parts are split into two separate
pieces.
TTSCW-SFU-143 Mule:
Roof Topper
TTSCW-SFU-139 Mule: Office
2
These are a series of icons that may be used throughout the instructions to
help your assembly. If in doubt, scroll ahead to confirm.
Do not glue this part
Carefully score and fold this part
This part – or its placement is completely optional
Look closely at this step The process order or part
used, may be specific
Repeat making this part the specified number of times
The next instruction step will be the same assembly so far, but from a
different
angle
Sub-assembly complete. This smaller construction
is ready to add to the main kit
Assembly Complete! There could be more optional
parts – check to the very end of instructions
FRAGILE: DO NOT BEND. “Bendy wood” is designed to
curve around a designed frame only.
TTSCW-SFU-139 Mule: Office
3
Highlighted long strip is similar to another part. The slimmer one is required
See the following steps before gluing in place, its a multi part process for
aligning
TTSCW-SFU-139 Mule: Office
4
TTSCW-SFU-139 Mule: Office
5
TTSCW-SFU-139 Mule: Office
6
Highlighted part is thicker than the similar piece used previously
TTSCW-SFU-139 Mule: Office
7
TTSCW-SFU-139 Mule: Office
8
TTSCW-SFU-139 Mule: Office
9
TTSCW-SFU-139 Mule: Office
10
TTSCW-SFU-139 Mule: Office
11
Highlighted long strip is similar to another part. The slimmer one is required
See the following steps before gluing in place, its a multi part process for
aligning
TTSCW-SFU-139 Mule: Office
12
TTSCW-SFU-139 Mule: Office
13
TTSCW-SFU-139 Mule: Office
14
TTSCW-SFU-139 Mule: Office
15
TTSCW-SFU-139 Mule: Office
16
TTSCW-SFU-139 Mule: Office
17
TTSCW-SFU-139 Mule: Office
18
TTSCW-SFU-139 Mule: Office
19
Do not glue doors to frame. This allows for open or closed positions
20
TTSCW-SFU-139 Mule: Office
TTSCW-SFU-139 Mule: Office
21
22
TTSCW-SFU-139 Mule: Office
TTSCW-SFU-139 Mule: Office
23
24
TTSCW-SFU-139 Mule: Office
TTSCW-SFU-139 Mule: Office
25
26
TTSCW-SFU-139 Mule: Office
Dont glue door to frame, it can be open or closed. See next step
27
TTSCW-SFU-139 Mule: Office
Open positional optional
28
TTSCW-SFU-139 Mule: Office
29
TTSCW-SFU-139 Mule: Office
30
TTSCW-SFU-139 Mule: Office
TTSCW-SFU-139 Mule: Office
31
TTSCW-SFU-139 Mule: Office
32
TTSCW-SFU-139 Mule: Office
33
34
TTSCW-SFU-139 Mule: Office
TTSCW-SFU-139 Mule: Office
35
TTSCW-SFU-139 Mule: Office
36
Circled parts go on the outside
37
TTSCW-SFU-139 Mule: Office
TTSCW-SFU-139 Mule: Office
38
TTSCW-SFU-139 Mule: Office
39
40
TTSCW-SFU-139 Mule: Office
TTSCW-SFU-139 Mule: Office
41
42
TTSCW-SFU-139 Mule: Office
43
TTSCW-SFU-139 Mule: Office
44
TTSCW-SFU-139 Mule: Office
The white/yellow coloured parts are split into two seperate pieces
45
TTSCW-SFU-139 Mule: Office
46
TTSCW-SFU-139 Mule: Office
47
TTSCW-SFU-139 Mule: Office
48
TTSCW-SFU-139 Mule: Office
49
TTSCW-SFU-139 Mule: Office
50
TTSCW-SFU-139 Mule: Office
TTSCW-SFU-139 Mule: Office
51
TTSCW-SFU-139 Mule: Office
52
TTSCW-SFU-139 Mule: Office
53
54
TTSCW-SFU-139 Mule: Office
TTSCW-SFU-139 Mule: Office
55
TTSCW-SFU-139 Mule: Office
56
57
TTSCW-SFU-139 Mule: Office
TTSCW-SFU-139 Mule: Office
58
TTSCW-SFU-139 Mule: Office
59
60
TTSCW-SFU-139 Mule: Office
TTSCW-SFU-139 Mule: Office
61
62
TTSCW-SFU-139 Mule: Office
TTSCW-SFU-139 Mule: Office
63
64
TTSCW-SFU-139 Mule: Office
Second version will be mirrored. See next step
TTSCW-SFU-139 Mule: Office
65
TTSCW-SFU-139 Mule: Office
66
67
TTSCW-SFU-139 Mule: Office
TTSCW-SFU-139 Mule: Office
68
TTSCW-SFU-139 Mule: Office
69
70
TTSCW-SFU-139 Mule: Office
TTSCW-SFU-139 Mule: Office
71
72
TTSCW-SFU-139 Mule: Office
73
TTSCW-SFU-139 Mule: Office
74
TTSCW-SFU-139 Mule: Office
75
TTSCW-SFU-139 Mule: Office
76
TTSCW-SFU-139 Mule: Office
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>