TTCOMBAT TTSCW-SFU-120 Elmor Low Straight Instruction Manual
- June 12, 2024
- TTCOMBAT
Table of Contents
TTCOMBAT TTSCW-SFU-120 Elmor Low Straight
SYMBOLS
These are a series of icons that may be used throughout the instructions to help your assembly. If in doubt, scroll ahead to confirm.
Do not glue this part
|
Carefully score and fold this part
|
This part – or its placement is completely optional
---|---|---
Look closely at this step – The process order or part used, may be specific
|
Repeat making this part the specified number of times
|
The next instruction step will be the same assembly so far, but from a different angle
Sub-assembly complete. This smaller construction is ready to add to the main kit
|
Assembly Complete! There
could be more optional parts – check to the very end of instructions
|
FRAGILE: DO NOT BEND.
“Bendy wood” is designed to curve around a designed frame only.
Assembly Instructions
Recommended to not glue highlighted part in place to allow removal to add Sky
level legs.
Feet will fit loosely within the tab holes. Glue to the long strips, not feet.
Recommended to glue the highlighted part to the support plate, not leg tabs.
This allows for legs to be removable for the Skylevel leg kits.
Gluing optional. If you want layout flexibility, do not glue in place.
