adidas T-19i Bluetooth Folding Treadmill User Manual
- June 11, 2024
- adidas
Table of Contents
T-19i Bluetooth Folding Treadmill
T-19i
BLUETOOTH
TREADMILL
UK: RFE EUROPA LTD. 8 CLARENDON DRIVE, WYMBUSH,
MILTON KEYNES, MK8 8ED
+44 (0)800 440 2459 / techsupport@rfeinternational.com
EUROPE: RFE EUROPA. LINPRUNSTRASSE 49, 80335 MUNICH,
DEUTSCHLAND
techsupporteu@rfeinternational.com
ES: serviciotecnico@rfeinternational.com / +34 800 600 816
DE: techsupporteu@rfeinternational.com / +49 (0)89 189 39 700
APAC (EXCLUDING AUSTRALIA): RFE ASIA PACIFIC, 26F,
2608-2609, 1 HUNG TO ROAD, KWUN TONG, KOWLOON,
HONG KONG.
techsupportapac@rfeinternational.com / +852 34685027
AUSTRALIA: techsupportaustralia@rfeinternational.com
techsupportchina@rfeinternational.com / 4007037798
USA: RFE SPORTING GOODS INC., 445 PLASAMOUR DRIVE,
SUITE 1, ATLANTA, GA 30324, USA
techsupportusa@rfeinternational.com / +1 (800) 215 6216
CAUTION
• The equipment is intended for home use only (HC). Do not use the
equipment in any commercial, rental, or institutional setting.
• Use the equipment only as described in this manual. Consult your
doctor before performing any exercise program.
• Keep children and pets away from the device at all times.
• Ensure the equipment is on a flat, stable and level surface with at least
0.6m of clear area surrounding the equipment.
• Always wear appropriate exercise clothing and training shoes.
• The safety level of the equipment can only be maintained if it is
examined regularly for damage and wear. Replace defective
components immediately and/or keep the equipment out of use until
repaired. Pay special attention to components most susceptible to
wear. All warnings and instructions must be read and followed prior to
use.
• Keep hair, body, and clothing free and clear of all moving parts.
• If at any time during exercise you feel faint, dizzy, or experience pain,
stop exercising immediately and consult your physician.
• Over exercising may result in serious injury or death.
• Keep the equipment indoors, away from moisture and dust. Do not put
the equipment in a garage or covered patio, or near water.
• If any of the adjustment devices are left projecting, they could interfere
with the user’s movement.
• The equipment should be used only by persons weighing
120 kg / 264.55 lb or less.
• Heart rate monitoring system may be inaccurate. Excessive exercise
can lead to serious injury or death. Stop exercising immediately.
• This equipment is for consumer use only.
• Ensure a safety area of at least 2000 mm x 1 000 mm behind the
equipment.
• A folded treadmill should not be operated.
• Allow the running surface to come to a complete stop
before folding.
• Noise emission under load is higher than without load.
CAUTION: The user is cautioned that changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules and Industry Canada
licence-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3(B) / NMB-3(B)
FCC& IC Radiation Exposure Statement:
This equipment complies with FCC and Canada radiation exposure limits
set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance
of 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions
should always be followed, including the following:
Read all instructions before using (this appliance).
WARNING
– To reduce the risk of burns, fire, electric shock, or injury
to persons:
1. This appliance is not intended for use by persons with
reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been
given supervision or instruction concerning use of the
appliance by a person responsible for their safety. Keep
children under the age of 13 away from this machine.
2. Use this appliance only for its intended use as
described in this manual. Do not use attachments not
recommended by the manufacturer.
3. Never operate the appliance with the air openings
blocked. Keep the air openings free of lint, hair, and
the like.
4. Never drop or insert any object into any opening.
5. Do not use outdoors. Household use only.
6. Do not operate where aerosol (spray) products are
being used or where oxygen is being administered.
SAVE THESE INSTRUCTIONS.
WARNING!
If you have to move the Treadmill whilst the running deck is down, ensure
the locking pin is tightly in place, dismantle the Treadmill so the running
deck
and uprights are separate, then move the parts into place using two people
and re-assemble. Remove the locking pin before use, failure to do so will
prevent the incline from working and will damage the incline motor.
|
|
QTY.
---|---|---
A01
|
Base frame
|
1
A02
|
Main frame
|
1
A03
|
Incline bracket
|
1
A04
|
Console bracket
|
1
A05
|
Panel support bracket
|
1
A06
|
Left upright tube
|
1
A07
|
Right upright tube
|
1
A08
|
Motor bracket
|
1
B01
|
Front roller
|
1
B02
|
Rear roller
|
1
B03
|
Left pulse steel plate
|
2
B04
|
Right pulse steel plate
|
2
B05
|
Speaker net
|
1
B06
|
Cylinder
|
1
B07
|
Cross wrench with screw driver
|
1
B08
|
5# Allen wrench
|
1
B09
|
Spring plate
|
2
B10
|
Locking pin
|
1
B11
|
6# Allen wrench
|
1
B12
|
Metal sheet
|
1
B13
|
Step bush
|
2
B14
|
Belt hook
|
2
B15
|
Bushing
|
2
B16
|
Side rail pressing plate
|
6
B17
|
Tension plate
|
1
B18
|
Safety key plate
|
1
C01
|
Motor top cover
|
1
C02
|
Motor bottom cover
|
1
C03
|
Left upright tube cover
|
1
C04
|
Right upright tube cover
|
1
C05
|
Back end cover
|
1
C06
|
Left side rail
|
1
C07
|
Right side rail
|
1
C08
|
Running belt
|
1
C09
|
Cushion
|
2
C10
|
Cushion side cover
|
2
C11
|
Black cushion
|
4
C13
|
Black Cushion
|
2
C14
|
Plastic Pad
|
2
C15
|
Motor Belt
|
1
C16
|
Adjustable Wheel
|
2
C17
|
Ring Protecting Wire Plug
|
2
C18
|
Flat Foot Pad
|
4
C19
|
Cone-Shape Cushion
|
2
C20
|
Console Panel Top Cover
|
1
|
|
QTY.
---|---|---
C21
|
Console Panel Bottom Cover
|
1
C22
|
Fan Guider
|
1
C23
|
Console Top Cover
|
1
C24
|
Console Bottom Cover
|
1
C25
|
Base of Instant Incline Button
|
1
C26
|
Base of Instant Speed Button
|
1
C27
|
Handle Bar
|
2
C28
|
Console Back Cover
|
1
C29
|
Fan Rotation Bush
|
1
C30
|
Bottle Mat
|
2
C31
|
Safety Key
|
1
C32
|
Holder Fixed Support Top Cover
|
1
C33
|
Holder Fixed Support Bottom Cover
|
1
C34
|
Holder Top Cover
|
1
C35
|
Holder Bottom Cover
|
1
C36
|
Holder Splint
|
1
C37
|
Lock Button
|
1
C38
|
Pressing Plate
|
1
C39
|
Fixed Step Bushing
|
10
C40
|
Holder Anti-Slip Mat
|
1
C41
|
Safety Key Base
|
1
C42
|
Moving Wheel
|
2
C43
|
Adjustable Foot Pad
|
2
C44
|
Button
|
2
C45
|
Button +
|
1
C46
|
Button –
|
1
C47
|
Tube Buckle
|
2
C48
|
Elastic Rope
|
1
C49
|
Hide Board II
|
2
C50
|
Key Board Overlay
|
1
C51
|
Console Overlay
|
1
C52
|
MP3 CAP
|
2
D01
|
Running Board
|
1
D02
|
DC Motor
|
1
D03
|
Incline Motor
|
1
D04
|
Power Socket
|
1
D05
|
Square Switch Button
|
1
D06
|
Overload Protector
|
1
D07
|
Magnet Ring
|
1
D08
|
Magnet Core
|
1
D09
|
Power Wire
|
1
D10
|
AC Single Wire (200)
|
1
D11
|
AC Single Wire (350)
|
2
D12
|
AC Single Wire (350)
|
2
D13
|
Grounding Wire
|
1
|
|
QTY.
---|---|---
D14
|
Console Board
|
1
D15
|
Control Board
|
1
D16
|
Key Board
|
1
D17
|
Key Board Connecting Top Wire
|
1
D18
|
Key Board Connecting Bottom Wire
|
1
D19
|
Console Top Signal Wire
|
1
D20
|
Console Middle Signal Wire 1
|
1
D21
|
Console Middle Signal Wire 2
|
1
D22
|
Console Bottom Signal Wire
|
1
D23
|
Pulse Top Signal Wire
|
1
D24
|
Pulse Middle Signal Wire
|
2
D25
|
Pulse Bottom Signal Wire
|
2
D26
|
Instant Speed External Top Wire
|
1
D27
|
Instant Incline External Top Wire
|
1
D28
|
Instant Speed Top Wire
|
1
D29
|
Instant Incline Top Wire
|
1
D30
|
Instant Speed Bottom Wire
|
1
D31
|
Instant Incline Bottom Wire
|
1
D32
|
Amplifier Connecting Wire 1
|
1
D33
|
Amplifier Connecting Wire 2
|
1
D34
|
Bluetooth transfer module
|
1
D35
|
Dongle
|
1
D36
|
Bluetooth transfer module wire
|
1
D37
|
Safety Switch Top Wire
|
1
D38
|
Safety Switch Bottom Wire
|
1
D40
|
Speed Sensor
|
1
D41
|
Speaker
|
2
D42
|
Fan
|
1
E01
|
M6 Nut
|
2
E02
|
M8 Nut
|
12
E03
|
M10 Nut
|
6
E04
|
M10x90mm Bolt
|
1
E05
|
M10x45mm Bolt
|
1
E06
|
Lock Washer Ø10
|
2
E07
|
M8x20mm Bolt
|
4
E08
|
M8x15mm Bolt
|
6
E09
|
M8x15mm Bolt
|
5
E10
|
M8x40mm Bolt
|
1
E11
|
M8x35mm Bolt
|
1
E12
|
M10x30mm Bolt
|
2
E13
|
M8x55mm Bolt
|
4
E14
|
M8x45mm Bolt
|
1
E15
|
M8x30mm Bolt
|
1
E16
|
M8x35mm Bolt
|
6
E17
|
M8x40mm Bolt
|
4
|
|
QTY.
---|---|---
E18
|
M6x55mm Bolt
|
3
E19
|
M5x15mm Bolt
|
1
E20
|
M10x30mm Bolt
|
2
E21
|
M6x25mm Bolt
|
2
E22
|
M5x12mm Bolt
|
6
E23
|
Screw ST2.9x8mm
|
6
E24
|
Screw ST4.2x40mm
|
2
E25
|
Screw ST4.2x30mm
|
4
E26
|
Screw ST3.5x12mm
|
6
E27
|
Lock Washer Ø6
|
3
E28
|
Lock Washer Ø8
|
16
E29
|
Spring Washer Ø8
|
9
E30
|
Flat Washer Ø8
|
16
E31
|
Big Washer Ø10xØ26×2.0mm
|
6
E32
|
Big Flat Washer Ø6
|
4
E33
|
Screw ST3.5x5mm
|
2
E34
|
Screw ST4.2x12mm
|
50
E35
|
M6x25mm Bolt
|
4
E36
|
M5x8mm Bolt
|
7
E37
|
Screw ST4.2x12mm
|
13
E38
|
Screw ST4.2x19mm
|
10
E39
|
Screw ST4.2x20mm
|
4
E40
|
M6x40mm Bolt
|
2
E41
|
Screw ST4.2x12mm
|
2
E42
|
Screw ST2.9x8mm
|
29
E43
|
M5x25mm Bolt
|
4
F01
|
Filter
|
1
F02
|
Inductance
|
1
F03
|
AC Single Wire (500mm)
|
1
F04
|
Grounding Wire (350mm)
|
1
F05
|
Screw ST4.2x12mm
|
4
28 T-19i BLUETOOTH ADIDASHARDWARE.COM 29
CONSOLE
INSTANT INCLINE
Press 3-6-9-12 to choose incline quickly.
FAN
Press this button to turn on or turn off the fan.
INSTANT SPEED
Press 4/3,8/5,12/7,16/10 to choose speed quickly.
INCLINE+/INCLINEPress
this button to adjust the incline.
PROGRAM
Press this button to choose 24 programs, 3 users and body fat.
STOP/PAUSE
Press this button to either pause or stop the machine.
START
Press this button at any time to start the machine.
MODE
Press this button to choose between time, distance, calories
workout targets.
SPEED+/SPEEDPress
this button to adjust the speed.
BLUETOOTH MUSIC
The user can connect their device to the treadmill via Bluetooth and select
adidas to play music. Adjust the volume of music from your device directly.
BLUETOOTH DONGLE
Insert DONGLE into port. Connect to DONGLE via Bluetooth using the APP and
your unique adidas code “adidas****”.
COMPUTER FUNCTIONS
QUICK START
Press START, the system will count down for 3 seconds, and make a sound.
SPEED+/SPEEDPress
SPEED+/- to adjust the speed of the machine.
INCLINE+/INCLINEPress
INCLINE+/- to adjust the incline of the machine.
MODE
• Press MODE to enter TIME, DISTANCE, CALORIES.
• Press SPEED+/- or INCLINE+/- to set the workout target value.
• Press START button, treadmill will run after 3 seconds.
• Press SPEED+/- and INCLINE+/- to adjust the speed and incline.
PROGRAMS
Press PROG button, you can choose 24 programs, 3 users, body fat.
(1) Set of 24 build-in programs:
From standby mode, press PROG button, display will show 24 programs, select
between 24 programs.
• Press SPEED+/- or INCLINE+/- to set the workout time.
• Each program can be divided into 10 sections; machine will beep 3 times
when starting a new section.
• Press SPEED+/- or INCLINE+/- to change the speed or incline during each
section.
• Machine will beep 3 times and stop when the program is finished.
(2) Set of 3 user programs:
From standby mode, press PROG button until you see U1,U2,U3;
• Press SPEED+/- or INCLINE+/- to set the time.
• Press MODE button to confirm and enter next section, repeat until you finish
the setting of all 10 sections.
• Press SPEED+/- or INCLINE+/- to change the speed or incline.
• Set the running time and press START to begin.
(3) Set of body fat test:
From standby mode, press PROG button until you get to FAT.
• Press MODE to enter information.
• Set value with SPEED+/- or INCLINE+/- from F-1 to F-4(F-1 GENDER, F-2 AGE,
F-3 HEIGHT, F-4 WEIGHT)
• Press MODE to enter F-5(F—5 BODY FAT TEST), hold hands on the hand pulse
sensors, the console will display your body fat value after 3 seconds.
• The body fat value is intended as a guide, and is not medical data:
F-1 | GENDER | 01 MALE | 02 FEMALE |
---|---|---|---|
F-2 | AGE | 10-99 | |
F-3 | HEIGHT | 100-200CM(40-80INCH) | |
F-4 | WEIGHT | 20-150KG(44-330LB) |
F-5
| FAT| ≤19|
UNDER WEIGHT
FAT| =(20—25)|
NORMAL WEIGHT
FAT| =(26—29)| OVERWEIGHT
FAT| ≥30| OBESITY
HAND PULSE
Please hold on the pulse sensor on handle bar and hold on about 3 seconds,
the display will show heart rate value.This value is intended as a guide, can
not
used as medical data.
HOW TO TRANSFER BETWEEN KPH TO MPH
Under standby mode, insert safety key, press SPEED + and INCLINE+ buttons
together and hold on about 5 seconds until you hear one sound, and then you
can finish the transfer between kph and mph.
LUBRICATION REMIND FUNCTION
This machine has lubrication remind function. After every total running
distance
of 300km (188miles), your treadmill needs to be maintained with oil. The
system
will remind with sound for every 10 seconds, and window will show “OIL”. This
means that your treadmill needs to be lubricated with oil. Please read the
user’s manual first, and add the oil to the middle part of running board.
After
you finishing lubrication, please hold on “STOP” button for 3 seconds, and the
system warning sound will disappear.
SAFETY KEY
Included with this machine is a red safety key, the machine will not operate
unless this is inserted. Its purpose is to immediately stop the machine in the
event of an emergency. The computer will display “safety key disconnected” if
not correctly attached to the treadmill. The clip on the other end of the
safety
key must be attached to the user at all times during your workout to ensure
the
machine stops immediately in the event of an emergency.
POWER SAVE FUNCTION
The machine is with energy saving function. Under standby mode, at the state
of waiting for operation, if without any operation, the saving on power
function
will be available after 10 minutes, the display will be closed up. You can
press
any button to turn on the display.
POWER OFF
You can switch off the power to stop the treadmill, which won’t be damaged
at any time.
CAUTION
• We recommend that you maintain a slow speed at the beginning of a
session and hold on to the handrails until you become comfortable and
familiar with the treadmill.
• Attach the magnet end of the safety pulling rope to the computer and also
attach the clip of the safety pulling rope to your clothing.
• To end your workout safely, press the STOP button or pull out the safety
pulling rope, then the treadmill will stop immediately.
MAINTENANCE AND CARE
PLACE THE TREADMILL ON LEVEL GROUND AND SET IT AT 5-8KPH
(3-5MPH) TO CHECK IF THE RUNNING BELT DRIFTS.
IF THE RUNNING BELT MOVES TO THE LEFT, TURN THE BOLTS ON
THE LEFT SIDE ¼ OF A TURN CLOCKWISE, THEN TURN THE RIGHT
BOLT ¼ TURN COUNTER-CLOCKWISE. IF THE BELT DOES NOT
MOVE, REPEAT UNTIL IT CENTRES.
WEEE logo this symbol on a product means that the product is covered by European Directive 2012/19/EU.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>