CK WORLDWIDE MR70 Gas Cooled Micro Torch Instruction Manual

MR70
TIG TORCH MANUAL MR70 MICRO TORCH

TECHNICAL INFORMATION

RATING @ 100% DUTY CYCLE: 70 AMP ACHF OR DCSP
COOLING METHOD: GAS COOLED
ACCESSORY ITEMS REQUIRED FOR COMPLETE INSTALLATION:
HEAD ACCESSORIES: MICRO TORCH
POWER CABLE ADAPTOR: 105Z57 (15PCA)

MODEL SELECTOR – TORCH PACKAGES

IMPORTANT !!
READ AND UNDERSTAND THE INFORMATION CONTAINED IN THIS MANUAL BEFORE OPERATING THE EQUIPMENT !

CK WORLDWIDE INC.
3501 “C” ST. N.E.
AUBURN, WA. 98002
USA
PHONE: 253-854-5820
PHONE: 800-426-0877
FAX: 253-939-1746
www.ckworldwide.com
[email protected]

PARTS:

PARTS LIST:

ACCESSORIES:

Safe-Loc Quick Connectors

SL-2……………………..TWECO
SL2-25………………….DINSE 25
SL2-35………………….DINSE 35
SL2-25M……………….DINSE 25 Gas-Thru
SL2-35M……………….DINSE 35 Gas-Thru
HEAD INSTALLATION: The insulating tube(MRTI) extends beyond the torch neck intentionally. Apply pressure when first installing the head. This will create a flair in the insulating tube to make a positive seal to the head. Tungsten Stick-Out Gauge and Wrench (included in torch package) Part # TS10
TURBO-SHARP® X is an enclosed electrode grinder, which eliminates grinding- dust exposure to both the user and the environment.
TURBO-SHARP® X includes a metal carrying case containing:

• Standard head for diameters: .040”(1.0mm),1/16”(1.6mm), 3/32”(2.4mm) and 1/8”(3.2mm)
• Accessory for stationary mounting
• Adapter for vacuum cleaning
• Pen style electrode holder
• Multi-functional cover
• Tools for assembling and replacement of grinding wheel
• User instructions

Consistent Results: WARRANTY:
CK Worldwide, Inc. warrants products manufactured by CK Worldwide, Inc. to be free of defects in materials and workmanship. CK Worldwide, Inc. limits this warranty to replacement of the product or parts thereof and excludes liability for injury, property damage or economic loss attributable to product use or misuse.
In any event, CK Worldwide, Inc. will only be responsible for its products when used with accessory items manufactured by CK Worldwide, Inc.
INSTALLATION:
Before using this torch, – tighten regulator, hose and power cable fittings with proper wrenches. Using small pliers, securely tighten all knurled hose fittings (Slide the torch handle back for access to the torch connections). Purge the regulator and TIG torch with inert gas at 20 cubic feet per hour. Following these steps will ensure contamination free welds. Repeat this procedure whenever torch or regulator fittings have been detached.
CONNECTION DIAGRAM: INFORMATION CHART:

Electrode Diameter in inches (mm)| Cup Size| WELDING CURRENT (AMPS) – TUNGSTEN TYPE| ARGON FLOW – FERROUS METALS| ARGON FLOW – ALUMINUM
---|---|---|---|---
AC Pure| AC Thoriated| DCSP Pure| DCSP Thoriated| Standard Body (Liters)| Gas Lens Body (Liters)| Standard Body (Liters)| Gas Lens Body (Liters)
.020 (0.50)| 4 or 5| 5 – 15| 5 – 20| 5 – 15| 5 – 20| 5-8 (3-4)| 5-8 (3-4)| 5-8 (3-4)| 5-8 (3-4)
.040 (1.00)| 4 or 5| 10 – 60| 15-80| 15 – 70| 20 – 80| 5-10 (3-5)| 5-8 (3-4)| 5-12 (3-6)| 5-10 (3-5)
1/16 (1.60)| 4, 5 or 6| 50 – 100| 70 – 150| 70 – 130| 80 – 150| 7-12 (4-6)| 5-10 (3-5)| 8-15 (4-7)| 7-12 (4-6)
3/32 (2.40)| 6, 7 or 8| 100 – 160| 140 – 235| 150 – 220| 150 – 250| 10-15 (5-7)| 8-10 (4-5)| 10-20 (5-10)| 10-15 (5-7)
1/8 (3.20)| 7, 8 or 10| 150 – 210| 220 – 325| 220 – 330| 240 – 350| 10-18 (5-9)| 8-12 (4-6)| 12-25 (6-12)| 10-20 (5-10)
5/32 (4.00)| 8 or 10| 200 – 275| 300 – 425| 375 – 475| 400 – 500| 15-25 (7-12)| 10-15 (5-7)| 15-30 (7-14)| 12-25 (6-12)
3/16 (4.80)| 8 or 10| 250 – 350| 400 – 525| 475-800| 475-800| 20-35 (10-17)| 12-25 (6-12)| 25-40 (12-19)| 15-30 (7-14)
1/4 (6.40)| 10| 325 – 700| 500 – 700| 750 – 1000| 700 – 1100| 25-50 (12-24)| 20-35 (10-17)| 30-55 (14-26)| 25-45 (12-21)

TUNGSTEN PREPARATION:

END PREPARATION:
DCSP (EN)
General Purpose:
Flat:
1/4 to 1/2 x Diameter Taper:
2 to 3 x Diameter
ACHF
General Purpose:
Ball:
Maximum 1 x Diameter Ball tip by arcing on clean metal at low current DCRP (EP) then
slowly increase current to form the desired ball diameter.| GRINDING PREPARATION:
Use a 60 Grit or finer aluminum oxide wheel Shape tungsten by grinding logitudinally, never radially. Remove sharp point to leave a truncated point with a flat spot. Diameter of flat spot determines amperage. The included angle determines weld bead shape and size. Generally, as the included angle increases, penetration increases and bead width decreases.| EXTENSION INSTRUCTION:
STANDARD PARTS
General Purpose:
3 x Diameter from end of cup. GAS LENS PARTS
General Purpose:
3 x Diameter from end of cup. Maximum extension: 6 x Diameter from end of cup.
(In draft – free areas)
---|---|---

CAUTION:
Personal harm will result from touching the hot parts of a TIG torch without insulative protection, or from looking directly or indirectly at an arc or reflected arc. At no time should bare skin be exposed to a welding arc.

References

• CK Worldwide | TIG Torches, Welding Machines, and Accessories | CK Worldwide

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>