COSTWAY C1WlQi6DCrL Round Table User Guide
- June 13, 2024
- COSTWAY
Table of Contents
COSTWAY C1WlQi6DCrL Round Table
Product Information
This product is a round table designed for outdoor use. It comes with a
tabletop (A), four table legs (B), four side panels (C), bolts (F), washers (G
& H), nuts (J), a wrench (K), and an Allen wrench (L). The table is made of
durable materials and is intended to be used on a stable and flat surface. It
is important to follow the provided instructions for proper assembly and
maintenance of the product.
Product Usage Instructions
Before You Start
Before starting the assembly process, please read and keep the instruction
booklet for future reference. Sort the parts and ensure that all components
are present. Familiarize yourself with the assembly process and follow the
instructions carefully. It is recommended to assemble the table as close as
possible to its final location to avoid unnecessary movement. Ensure that the
product is placed on a flat and stable surface. Keep packaging materials and
components out of reach of children.
Step 1: Attach table leg (B) to tabletop (A)
- Place the tabletop (A) on a stable surface.
- Attach each table leg (B) to the tabletop (A) using bolts (F), washers (G & H), nuts (J), and the provided wrench (K) or Allen wrench (L).
- Do not fully tighten the bolts at this stage.
Step 2: Attach side panel (C) to table leg (B)
- Attach each side panel (C) to a table leg (B) using bolts (F), washers (G & H), nuts (J), and the provided wrench (K) or Allen wrench (L).
- Fully tighten all bolts at this stage.
Cleaning and Maintenance
To clean the table, use mild soapy water and rinse thoroughly. Dry all frame
parts completely. Do not use bleach, acid, or other solvents on the fabric and
metal parts. It is recommended to use furniture covers to protect the round
table when it is not in use. Regularly inspect and tighten all bolts to ensure
proper performance and safety. During off-season periods, store the table in a
dry and protective area to prolong its life and maintain its beauty.
Before You Start
- Please read all instructions carefully.
- Retain instructions for future reference.
- Separate and count all parts and hardware.
- Read through each step carefully and follow the proper order.
- We recommend that, where possible, all items are assembled near the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
- Always place the product on a flat, steady, and stable surface.
- Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard
Round Table
PARST & HARDWARE LIST
EXTRA
ATTENTION
- Keep children away during assembly. This item contains small parts that can be dangerous for children.
- Children should always be under direct adult supervision while using this product.
- Do not discard any of the packaging until you have checked that you have All ofthe parts and fittings required.
- Carefully remove the contents from the package. If any parts are missing,
- Do not attempt to use the product until they have been obtained.
- Make sure that each bolt needed for all steps matches the corresponding figure to ensure proper assembly
Step 1 : Attach table leg (B) to tabletop (A) using bolts (F), washers (G & H) nuts (J), and wrench (K) Allen wrench (L).
NOTE: Please do not fully tighten bolts until the unit is fully assembled
Step 2: Attach side panel (C) to table leg (B) using bolts (F), washers
(G & H) nuts (J), and wrench (K) Allen wrench (L).
NOTE: Please fully tighten all bolts at this time
Step 3: Carefully turn the unit upright
Cleaning and Maintenance
Clean the frame with mild soapy water, and rinse thoroughly. Dry frame parts
completely. Do not use bleach, acid, or other solvents on the fabric and metal
parts. We recommend the use of furniture covers to protect the round table
when not in use. Inspect and tighten all bolts on a regular basis to ensure
proper performance and safety. In order to prolong the life and beauty of your
round table, we recommend
storing it in a dry and protective area during off-season periods.
Return / Damage Claim Instructions
- DO NOT discard the box / original packaging.
- In case a return is required, the item must be returned in the original box. Without this
- Your return will not be accepted.
- Take a photo of the box markings.
- A photo of the markings (text) on the side of the box is required in case a part is needed for replacement. This helps our staff identify your product number to ensure you receive the correct parts.
- Take a photo of the damaged part (if applicable).
- A photo of the damage is always required to file a claim and get your replacement or refund processed quickly. Please make sure you have the box even if it is damaged.
- Send us an email with the images requested.
- Email us directly from the marketplace where your item was purchased with the
- Attached are images and a description of your claim.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>