Sealey PCT2 Plasma Cutting Table Workbench User Guide
- June 13, 2024
- SEALEY
Table of Contents
PLASMA CUTTING TABLE/WORKBENCH
– ADJUSTABLE HEIGHT WITH CASTOR
WHEELS
MODEL NO: PCT2
Thank you for purchasing a Sealey product. Manufactured to a high standard,
this product will, if used according to these instructions, and properly
maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE
OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND
WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE
INSTRUCTIONS SAFE FOR FUTURE USE.
SAFETY
WARNING! Ensure Health & Safety, and local authority regulations are
adhered to when assembling and using the workbench.
Locate workbench in a suitable area where it will not be an obstruction.
Keep the general area clean, uncluttered and ensure there is adequate
lighting.
WARNING! Erect unit on a level and solid surface such as concrete.
Keep children and unauthorised persons away from the work area.
DO NOT use the unit for any purpose other than that for which it is designed.
DO NOT clean the unit with any solvents which may damage the surfaces.
Ensure that the unit is properly and securely assembled before use.
NTRODUCTION
Mild steel plasma cutting table/workbench. 32 Replaceable cutting slats, order
Model No. PCT2RS for a pack of 10 replacements.
Removable side handles/cable tidy hanging hooks. Adjustable working height
750mm to 1011mm. Lockable castor wheels for easy movement. Funnel shaped base
with slide out tray for safe removal of offcuts and slag. Supplied flat
packed for easy self assembly using hand tools (not provided). Supports weight
capacity of 136kg.
SPECIFICATION
Model No.: …………………………………………………………..PCT2
Max. weight capacity …………………………………………… 136 kg
Height range ………………………………………….. 750 – 1011 mm
Assembled dimensions (W x D) …………………1200 x 910 mm
Bench dimensions ……………………………………..915 x 910 mm
Replacement parts: Slats (pack of 10) ………………… PCT2RS
CONTENTS
Thank you for choosing DT20 , your device comes with a 10.1 inch IPS screen,
Octa-core CPU, makes it easy on third-party applications 12.0 development.The
main features including Wifi, BT, GPS, FM, voice calls,etc.With wireless
communication and Internet access, you can surf the internet anytime,
anywhere. Embedded high-precision GPS modules can be used for navigation by
installing map software. Sensors provide you a new operation and entertainment
experience. Dual HD camera leading electronic consumer era into a new stage of
Pocket Internet entertainment.
This manual systematically introduces the functions, operating tips and
precautions, please read this manual carefully before operating.
ASSEMBLY
NOTE:
It is recommended that two people are used to assemble this item.
NOTE: DO NOT fully tighten fixings until all are in place.
5.1. Assemble foot links (fig1.15) to wheels (fig1.10) using fixings (fig1.16,
1.17, and 1.18).
5.2. Fix support beams (fig1.14) to tabs on foot support beams (items fig1.13
and fig1.7).
5.3. Fix main beams (fig1.2, fig.1.4) to top of foot supports using fixings
(fig1.21, 1.22, 1.23). Note positioning of main beams (see fig1).
5.4. Tilt the assembly and locate the assembled foot links (from 5.1 above)
into the foot supports and fit foot support pins (fig1.24).
5.5. Lay platform bases (fig1.12) into lower section (see fig1).
5.6. Fix funnel side plates to main beams (fig1.2, fig1.4) using fixings
(fig1.21, 1.22, 1.23). Note positioning of side plates (see fig1).
5.7. Fix drawer supports (fig.1.8, fig1.11) using fixings (fig1.20, 1.21,
1.22) (see fig1.).
5.8. Fix side handles (fig1.1) using fixings (fig1.16, 1.17, 1.18).
5.9. Load slats (fig1.3) into top frame.
5.10. Insert drawer (fig1.9) onto drawer runners in drawer supports (fig1.8,
fig1.11).
5.11. Tighten all fixings and ensure the structure is sound, stable and
capable of safely carrying a load of up to 138 kg.
MAINTENANCE
6.1. Clean regularly using non-abrasive cleaner and a damp cloth.
6.2. Before each use check all parts and the integrity of the structure. If
damaged or suspect, remove from service and take necessary action to correct.
Parts support is available for this product. Please email [email protected]
or telephone 01284 757500
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and
disposed of in a manner which is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations.
Note: It is our policy to continually improve products and as such we
reserve the right to alter data, specifications and component parts without
prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is
required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
[email protected]
www.sealey.co.uk
© Jack Sealey Limited