ADUROSMART ERIA Smart LED Light White Tunable Bulb User Manual
- June 13, 2024
- ADUROSMART
Table of Contents
ADUROSMART ERIA Smart LED Light White Tunable Bulb
The ERIA White Tunable Smart Bulb offers multiple white tone of color
temperature, to let you choose whatever mood you want.
Easily controlled via your smartphone/tablet, or a ERIA Wireless Remote, even
by Voice Assistant as Amazon Alexa and Google Assistant. Simply use with a
AduroSmart ERIA hub or a Zig Bee compatible gateway.
www.adurosmart.com/manuals/softwhitebulb
INSTRUCTION
- .Unpack your bulb and screw it into your light fitting and turn on the light.
- Connect with the ERIA hub
- Download the Adurosmart App from the Apple App Store or from Google Play or go to http://adurosmart.com/adurosmart-app/
- If you have a third party Zig Bee compatible hub then proceed to step 9.
- Open the AduroSmart ERIA App.
- On the bottom right corner press on “Settings”.
- Select “Devices”.
- On the top right corner press on the “+” symbol then press on “Add device”.
- Press on “Brands” and then select “AduroSmart ERIA”.
- Press on “White Tunable Bulb”
- Switch the power to the light ON/OFF 5 times to initiate the pairing mode.the bulb will flash once indicating that it has entered pairing mode. The pairing mode will last 60 seconds. lf you have a third party hub, then this is the moment to Initiate the search from your Smart Home hub app.
- Proceed by pressing on “Search” to allow the ERIA hub to find the bulb, the LED indicator on the hub will flash green this indicates that the hub is searching for devices
- When the bulb has been found and paired successfully it will turn green and it will show up in your search results, press on “Done” to complete the process.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (l) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning : Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
The distance between user and products should be no less than 20cm
NEED HELP? CALL US
For troubleshoots, Instruction video’s or more Information please visit us at
www.adurosmart.com/faq
Chai with one of our support agents at
www.adurosmart.com
(844)602-3069 Exl.1 Para Usuarios Mexicanos: 01 B00B777777
[email protected]