2E TACTICAL Safety Goggles Falcon Army Green Instructions

Tactical goggles instructions

THE MAIN PURPOSE OF GOGGLES

security professional tactical goggles are made to protect the eyes from flying objects during outdoor activities such as air riffle shooting, paintball shooting, hunting, horse riding etc.
Goggles can be used to avoid eye damage from branches, bushes, etc. when walking in areas with dense vegetation such as jungles. They also prevent eye Irritation during sandstorms or high winds. The lenses are very strong and impact resistant and protect the eyes well during military operations.

Product Contents

Product Features:

• Large scratch resistant, anti-collision, shatterproof polycarbonate lens.
• Excellent peripheral and wide field of view with TPU frame.
• UV400 filter with 99% protection from UVA/UVB/UVC & harmful blue light.
• 2.6 mm polycarbonate lens coating reduces glare and adjusts light transmission, improves vision.
• Full seal protection, adjustable headband keeps your goggles tight.
• Cloth sleeve protects your lens and the back of the head.
• Dust filtration and breathability.

Maintaining Goggles and Lens in Good Durable Condition:

• Do not use your fingers or a rough cloth to rub or clean the lenses, they will either stain the lenses or reduce the anti-fog effect.
• Keep your glasses in a case or box to prevent scratches on the lens element.
• Do not use mascara or other oily products if the lens becomes dirty.
• Keep the goggles ventilated or use a hair dryer to dry the inside of the goggles after getting wet.
• Do not wipe the inner lens, as this will reduce the effectiveness of the anti-fog.

Lenses types

The tactical glasses come with 3 interchangeable lenses that can be used in the different cases:
Gray lens: does not change the original color of the surrounding Space, blocks glare and reduces eye strain in bright conditions.
Clear lens: does not change the original color of the surrounding area and blocks 90% of harmful rays. Suitable for low light or cloudy weather.
Yellow lens: Allows you to better distinguish objects, see them more clearly and with contrast. Filters out most of the blue light.

Removing the lens:

Tactical goggles hold the lens very securely in the frame for best performance and protection. Don’t be afraid to use force and pressure on a flexible frame when removing or inserting a lens.
To avoid scratches, it is recommended that you store your glasses only in the case provided. Always hold your glasses with both hands before removing your lenses.

1. Place the tips of four fingers on the inside of the lens, use both hands to stretch the TPU frame with proper force. Until one side of the lens comes out of the frame.
2. Use the supplied spectacle bag or soft gloves to remove the other side of the lens until it is completely detached from the frame.

Inserting the lens:

1. Working on the front of the glasses, insert the right edge of the lens first and then the left edge into the appropriate areas of the frame.
2. Continue inserting the lens, working from the outer edges at the top, sides, and bottom, securing the keyhole recesses to the posts securely. The nose should be the last pinned area.
3. When the lens is fully inserted, make sure there are no gaps between the lens and the frame.
4. Clean the lens to remove fingerprints and smudges.

Removing the side-clip:

Note. There is no need to remove the side clip except to install or remove the anti-reflective sleeve.

Fastening the side-clip:

1. Grasp the frame with your thumb and forefinger.
2. Insert the tabs on the bottom of the frame into the holes on the bottom of the side clamp.
3. Insert the hole in the top of the frame with uprights on the side clip and push It tn.

Note: The side clip is easier to install after the lens Is installed.

Inserting the Prescription (Rx) Connector & Carrier:

lf you require corrective lenses, the Prescription (Rx) Carrier system is available in the eyewear range.

1. Insert the Rx Carrier into the Rx Connector, aligning the oval post in the center of the Rx Carrier with the oval hole on the Rx Connector.
2. Gently push the Rx Carrier down until it Snaps into place.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>