2E BS006 Portable Power Station User Manual

2E BS006 Portable Power Station

Product Information

• Product Name: Portable Power Station
• Model Number: 2E-BS006
• Capacity: 1997Wh
• Power Output: 2000W (pure sine wave AC output)
• Battery Type: LiFePO4

Usage: This portable power station is designed to provide high-power, high-capacity energy storage. It can be used as a backup power supply during emergencies, power cuts, disasters, camping, and in vehicles. It can also provide power for various electronic tools.

Features

• High safety performance
• Fast charging capability (fully charged within 2 hours)
• Pure sine wave AC output suitable for household appliances
• Supports solar charging up to 500W
• Overload protection
• Multiple control options (main power control, light control,
• USB control, DC control, LCD control)

Product Usage Instructions

1. Avoid using the product near high temperature, high humidity, direct sunlight, and fireplaces.
2. Do not disassemble or modify the product to prevent malfunction and fire.
3. Dispose of or recycle the product according to local laws.
4. Avoid dropping the product from a high place or subjecting it to strong impacts.
5. Keep the product out of the reach of children.
6. Use only genuine accessories provided by the company to avoid damage and repair costs.
7. Leave a space of about 30cm away from the side suction and exhaust ports for proper heat dissipation.
8. When not in use, turn off the power, unplug the power cord, and Avoid storing the product in direct sunlight or high-temperature and humidity conditions.
9. For long-term storage, discharge the power completely once every 3 months and then recharge to about 50%.
10. Do not use the product and its accessory cables and connecting equipment if there is a defect.
11. Avoid storing the product in extremely high or low-temperature places, such as in a car or field warehouse, to prevent battery life reduction.

Thank you very much for purchasing a 2000W power station. Be sure to read this manual carefully before using the product in order to use the product correctly. This manual is needed for product after-sales service. Please keep this manual together with the invoice and other purchase certificates. In order to ensure the safety of this product during transportation, this product is only charged about 30% when it is packaged. Please recharge when you get the product. The product can be charged directly by the wall socket, please do not use extension cords and cable taps. When the product is charging, do not plug other products into the same socket.

WARNING

1. Please avoid using the product near high temperatures, high humidity, direct sun environment, and a fireplace.
2. Do not disassemble or modify this product, it will cause malfunction and fire.
3. Please discard or recycle the product according to the methods prescribed by local laws.
4. Be careful not to drop the product from a high place and give the product a strong impact.
5. Keep or use the product in a place out of the reach of children.
6. Please use our company’s genuine accessories. The damage caused by the use of non-genuine accessories cannot be repaired free of charge.
7. Please leave a space of about 30cm away from the side suction and exhaust ports, so as not to affect the heat dissipation of the product.
8. When not using this product, please turn off the power and unplug the power cord. Please avoid storing the product in a place exposed to direct sunlight with high temperature and humidity.
9. For long-term storage, please consume power from full power to no power once every 3 months, and then recharge to about 50%.
10. Please do not use this product and its accessory cables and connecting equipment when there is a defect.
11. Please do not store the product for a long time in extremely high and low-temperature places such as in the car and in the field warehouse to avoid shortening the battery life.

Packing List

Product introduction

This product is a 1997Wh large capacity 2000W high power, 2 hours of high- speed charging portable energy storage power supply, using high safety performance of LiFePo4 battery. It can be used as a backup power supply in case of emergency power cuts, disasters, camping, and vehicles, and can also provide power for various electric tools. 2000W high power, pure sine wave AC output, can be used for household appliances such as dryers, microwave ovens, refrigerators, and high-power induction cookers, and it can also be used for other electronic devices such as personal computers. Through the 1100W ultra- fast charging, this model can be fully charged within 2 hours. The AC input/output voltage frequency can be automatically or manually switched between 50Hz/60Hz. This product also supports a maximum 500W solar charge, allowing you to charge even when the power is cut or in outdoor situations.

1. Main power control
2. Light control
3. USB control
4. DC control
5. LCD control
6. Air intake/outlet
7. AC on/off control (50Hz/60Hz switching control)
8. Anderson input port (for solar panels)
9. AC input port
10. Overload protection

Main Power Control
The Main Control for the whole system turns on/off.
Operate method : Long press the button for 3s to turn on/off the system.

LED light control
Operate method: Short press to turn on and change the light mode (SOS/Flash).
Notice : You can turn off the light by long pressing the button (1-2s) in any mode.

USB button
Operate method: short press to turn on/off.

DC button
Operate method: short press to turn on/off.

LCD display
Present the remaining power and use data.

Cooling system
When the fans are working, please don’t block the channel.

• AC button (AC output, total share 2000W)
• Operate method: short press to turn on/off.

Notice

1. Please confirm the output voltage or frequency before using.
2. Long press the button for 2s to enter the frequency changing mode, 50Hz, and 60Hz will blink in the display, Press again the button to choose the right frequency, wait till the frequency is not blinking, and then you will get the frequency you want.

Solar panel input
Use the included Anderson->MC4 conversion cable to connect the solar panel.

1. Solar panels can have a maximum input of 500W and a maximum voltage of 50V.
2. If exceeding the maximum voltage leads to equipment damage, it is beyond the scope of a warranty.

AC Input
Use the wall socket to get 1100W fast charging, which can fully charge from O to 100% in 2 hours. The product can be charged directly by the wall socket, please do not use extension cords and cable taps. When the product is charging, do not plug other products into the same socket.

• Please do not plug several devices together in the extension socket at once, the current will be too high and bring damage to the cable and fire risk.
• Do not use the same socket to connect other devices when charging this product. When the same wiring in a general household exceeds 1500W. The safety circuit breaker will be activated.

Overload protector
To protect this product, an overload protector is added. Prevent damage to the product due to excessive AC input current caused by lightning and power grid fluctuations. When such a situation occurs, the overload protector will start to cut off the AC input to protect the product.

Restore the AC input function of the product in the following sequence.

1. Turn off the power button and unplug all ports.
2. After confirming that all parts are normal, turn on the power button.
3. Press the overload protection button to switch on the AC line to restore AC input.

Overload protector
To protect this product, an overload protector is added. Prevent damage to the product due to excessive AC input current caused by lightning and power grid fluctuations. When such a situation occurs, The overload protector will start to cut off the AC input to protect the product. Restore the AC input function of the product in the following sequence.

1. Turn off the power button and unplug all ports.
2. After confirming that all parts are normal, turn on the power button.
3. Press the overload protection button to switch on the AC line to restore AC input.

Display icon introduce

1. Charging/using time
2. Total output power ( Fan state
3. LED light
4. High/low-temperature protection
5. AC output
6. Power percentage
7. Type-C output (5 Total input power
8. USB output ( AC charging
9. Anderson charging
10. DC output
11. Cigar lighter output (5 XT-60 output

Display Attention 38 When this icon lights up. Please keep the Air intake/outlet unobstructed.
When this icon lights up. Please note the device is now with 0. high/low temperature and will possibly stop working till the temperature is back to the normal standard.
When this icon is blinking, represents that the AC input is faulty, please recheck (Power/Hz/cable).
When this icon is blinking, represents the output is faulty, please recheck.

UPS mode

UPS function
This product has the bypass mode and does not need to pass through the battery can directly output from the AC. In UPS mode, when the AC input power of the mains is cut off due to a power outage, the AC input power of the mains can be used in about automatic switch to product battery power within 10 ms to ensure AC output.

UPS Connections
As shown in the figure below, connect the product between the socket on the wall and the electrical appliances, and the power of the product is in the ON state. When you turn on the power of the electrical appliances, it will directly use the AC power of the power grid. In this state, when the power grid is cut off, it will automatically switch to the product’s internal battery to supply power. In UPS mode of The United States and Japan, the maximum power output of AC is below 1100W, and the AC output exceeds 1100W. The AC output icon blinks indicating overload. In UPS mode of China, United Kingdom, Europe and South Korea, AC output of the maximum power below 2000W, AC output over 2000W, AC output icon flashes indicating overload.

Solar panel connection
Our products can be connected to solar panels and can be charged through solar panels. The solar panels produce 400 watts of power and can be fully charged in as little as five hours. (Solar panel input can be the maximum 500W (maximum voltage 50V)). Solar panel charging power, according to the weather and climate conditions. Solar panel voltage exceeding 50V will damage the equipment and may not be covered by warranty. By solar panels Connecting Pattern  The area of charging

Connecting Pattern ® The area of charging

Car charging

This product can be charged by the cigarette lighter in the car with an AC cable (accessory: ACC hereinafter). Turn on the power of this product, connect the ACC charging cable to the cigarette lighter in the car and the Anderson interface on the side of the product, turn on the engine of the car, and the LED of this product, and turn on the engine of the car, and the LED of this product will show the input power.

• On-board charging should be carried out with the car engine turned on. If the engine is not turned on, the battery might run out.
• Car charging is usually low power of 90-120W, and the charging time will be long. If you need a quick charge, it is recommended to use the mains.

Specifications

AC output

| AC output: 50/60Hz (frequency switch available), rated 2000W, 4000W peak pure sine wave. Built-in overload and short circuit protection.
USB QC3.0| 18W x 2
USB| USB-A (5V 2,4А) x 2
Type-C| 5-20V/5,0А,100W max (PD3.0).
DC 5521| 12V/3А x 2
XT-60 output| 12V/25А
Cigar lighter output| 12V/10А
Power off current| <500uА
Operating temperature| -10~40°C
Environment humidity| ≤90%RH

Battery specification

Fault resolution

Above icon flashes and buzzes.

| ****

Output exceeds standard, short circuit.

| 1.       Remove the load.

2.       Check whether the overload protector is up. If it is up, press the overload protection button is pressed, press the AC output button.

3.       If the overload protector does not spring up, directly press AC output Restore output function.

The temperature warning icon flashes and buzzes.

| The temperature of this product has exceeded the appropriate temperature.|

Remove the equipment, turn off the power of this product, and wait for the equipment to reach the appropriate temperature.

Charging unavailable.

| Bad wire connection.| Confirm the connection status of the line and the power supply status.

Overload protection function activated.

| 1.       Turn off the power button and remove cables from all ports.

2.       After verifying that all components are normal, turn on the power button.

3.       Press the overload protection button to connect the AC cable to recover AC input.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>