Seeed 320220001 Gas Sensor Socket Owner’s Manual
- June 13, 2024
- Seeed
Table of Contents
320220001 Gas Sensor Socket
Product Information:
Product Name: Gas Sensor Socket
SKU: 320220001
Description: This socket is a handy accessory
for your gas sensors. You can use it to extend the leads of gas
sensors such as MQ5 and Smoke Sensor. It helps you mount a gas
sensor on a breadboard or protect the gas sensor from the heat of
soldering.
Recommendations:
- Gas Sensor – MQ5
- Grove – Gas Sensor (MQ9)
- Grove – Gas Sensor (MQ2)
- Grove – Gas Sensor (MQ3)
- Alcohol Sensor MQ303A
- Grove – Gas Sensor (MQ5)
Product Usage Instructions:
-
Read through the guide in Shenzhen 2 U before making any
purchase in this catalogue. -
To use the Gas Sensor Socket, follow these steps:
-
Gently de-solder the gas sensor if necessary.
-
Turn the gas sensor upside down.
-
Solder the gas socket on the reverse side of the PCB.
-
Insert the gas sensor into the gas socket.
Category
Bazaar
Fusion
Propagate
Community
Search for products, brands and platforms
Wiki
Bazaar / Interaction / Sensor for Interaction / Gas Sensor Socket
Gas Sensor Socket
SKU 320220001
Please read through the guide in Shenzhen 2 U before making any purchase in
this catalogue
USD
Login | Sign up
Feedback & IdeasHelp
IN STOCK 11 Available
Qty
1
ADD TO CART
Description
Please read through the guide in Shenzhen 2 U before making any purchase in
this catalogue.
This socket is a handy accessory for your gas sensors. You can use it to
extend the leads of gas sensors as MQ5and Smoke Sensor. It helps you can mount
gas sensor on breadboard or protect gas sensor from the heat of soldering.
Specification
Recommendations
Gas Sensor -MQ5
Grove – Gas Sensor(MQ9)
Grove – Gas Sensor(MQ2)
Grove – Gas Sensor(MQ3)
Alcohol Sensor MQ303A
Grove – Gas Sensor(MQ5)
See More
Questions and Answers
Have a question about this? Ask people who own it.
0
This is a great little addition to the Seeed Studio Product Line. With it, it is possible to gently de-solder some of
the gas sensors and turn them upside down by soldering a gas socket on the reverse of the PCB, then inserting
the gas sensor.
This
Julian Bourne on Oct 19,2016
Reply upvote (0)
Downloaded from Arrow.com.
Grove – Moisture Sensor Grove – Dust Sensor 1W Solar Panel 80X100 Temperature sensor with steel head 0.5W Solar Panel 55×70 Grove – Water Sensor
View History
Basic Bread board 16.5*5.5 cm
ADD TO CART
Bread board Clear – 8.2 x Mini Bread board
5.3cm
4.5×3.5CM-Blue
ADD TO CART
ADD TO CART
Mini Bread board 4.5×3.5CM-Black
ADD TO CART
ProtoBoard 9cm * 15cm 2.0mm
ADD TO CART
Bus Pirate v3.6 universal serial…
Base Shield V2
Grove – Temperature & Humidity…
LiPo Rider Pro
Grove – Universal 4 pin connector
Load Sensor
Grove – Universal 4 pin connector…
Grove – 4 pin Female Jumper to Grove…
POPULAR SEARCHES
PCB Manufacturing PCB Stencil Arduino XBee Arduino Shield Beaglebone Black FPGA LinkIt ONE Crazyflie 2.0 Raspberry Pi 3 Model B RF Explorer DSO Nano v3
Raspberry Pi MediaTek X20
Raspberry Pi Touchscreen HiKey Board rplidar
Linkit Cubieboard Beaglebone Cape raspberry pi relay RPLIDAR A2
SHIPPING INFORMATION
KNOWLEDGE BASE
HELP CENTER
Seeed Info Reach Us Distributors Designers Careers Site Map
Customer Service Contact Us Customer Support Technical Support
Terms and Conditions Order Information Shipping Information Payment Information Warranty and Return Terms of use Privacy Policy
Copyright © 2008-2017 Seeed Development Limited All rights reserved
Stay Tuned
Subscribe to get the latest product releases, activities and tutorials from
Seeed Studio.
email address
Select Language SelCeocnt LtaacntgSuuapgpeort
Downloaded from Arrow.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>