GLAKER K11S Professional Hair Clipper Instruction Manual

June 13, 2024
GLAKER

GLAKER K11S Professional Hair Clipper Instruction Manual
GLAKER K11S Professional Hair Clipper

When using electrical products, especially when children are present, basic safety precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE)

DANGER – 7o reduce the risk of electrocution:

  1. Always unplug this product immediately after charging.
  2. Do not use while bathing.
  3. Do not place or store product where it can fall or be pulled into a tub or sink.
  4. Do not place in or drop into water or other liquid.
  5. Do not reach for a product that has fallen into water. Unplug immediately.
  6. After cleaning, make sure the charging port is completely dry before you connect it to the mains.

WARNING – 7o reduce the risk of burns, electrocution, fire, or injury to persons.

  1. This appliance should never be left unattended when plugged into a power outlet when charging
  2. Close supervision is necessary when this product is used by, on, or near children or invalids.
  3. Use this product only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
  4. Always make sure attachments are aligned properly.
  5. Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the product to a service center for examination and repair.
  6. Keep the cord away from heated surfaces.
  7. Never use while sleeping or drowsy.
  8. Never drop or insert any object into any opening or hose.
  9. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
  10. Do not incinerate this appliance even if it is severely damaged. The batteries can explode in a fire.

SAVE THESE INSTRUCTIONS

IMPORTANT SAFEGUARDS

  1. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the. appliance in a safe way and understand the hazards involved.
  2. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
  3. This appliance contains batteries that are non-replaceable. When the battery is at end of life, the appliance shall be properly disposed of.
  4. The appliance must only be supplied at safety extra low voltage corresponding to the marking on the appliance.
  5. The power supply with output power not exceeding 15 W in normal and abnormal working conditions must be used.
  6. WARNING: Keep the appliance dry.
  7. WARNING: Cutting blades may become hot after prolonged use.
  8. WARNING: Do not use this appliance near bathtubs, showers, basins or other vessels containing water.
  9. Keep appliance out of reach from young children, particularly during use.
  10. Do not expose the appliance or battery to excessive temperatures
  11. Be aware of the risk of terminals of the battery-operated appliance or battery being short circuited by metal objects.
  12. There is a built-in rechargeable lithium battery in the product. When disposing of the hair clippers, do not mix it with general household waste. It should be sent to the battery recycling center for disposal in accordance with local disposal management regulations.

SAVE THESE INSTRUCTIONS


Recycling & Environmentally Friendly Disposal

In order to protect the environment, after the expiration of the products service life, it should not be discarded in the same way as domestic garbage; please recycle at a professional recycling center. For further information on the recy- cling of this product, please consult your local municipality, processing service center, or the store where you purchased the product. You can help protect the environ- ment! Please remember to respect the local regulations, and hand in the non-working electrical equipment to an appropriate waste disposal center.

Components

Components
Components

Parameters

Professional
Hair Clipper| Motor| Operating voltage: 3V=
---|---|---
High performance motor
Battery| 2500 mAh Li-ion battery
Charging time: about 3 hours
Operating time with full charge: about 5 hours
Applicable
Adapter Type| Input: 100-240V-50/60Hz
---|---
Output: 5V=1000mA
Output cannot exceed 5V, otherwise the device
will bum out, resulting in a permanent end
to its operational life.

Precautions For Use

Precautions For Use

DO NOT disassemble the product by yourself.
DO NOT wash the hair clippers; keep them away from wet areas.

The product should only be cleaned with a lightly dampened moist cloth or a mild soap solution
DO NOT charge the product within temperature ranges of above 40°C or below 0°C. Otherwise the battery’s capacity will be reduced and its lifespan will be shorten.
Output CANNOT exceed 5V, otherwise the device will burn out, resulting in a permanent end to its operational life.

The product will become warm during usage and charging, this is normal.
Please remove the battery safely, and follow all proper protocols in your area or battery disposal, when the battery ‘s service life ends.

Instruction

Overview

LED Display

  • Power Indicator Percentage
    LED Display

  • If there is a lack of oil, the red light on the left side of the clipper turns on and there is an audible reminder at the same time.

  • If the battery is below 5%, the red light on the right will flash.
    LED Display

Fixed-Length Function

A: Use of guide Combs: Crop and trim the hair Options: (1.5, 3, 4.5, 6, 10, 13, 16, 19, 22, 25mm, Left&Right) 12 length adjustment options, they help to control the length of the hair that is cut.

  1. To determine the length of the haircut
  2. To select the appropriate guide Combs for styling and trimming
    Fixed-Length Function
  • To adjust the clippers
    These clippers are equipped with an adjustable taper lever that changes the closeness of the hair trimming. When the lever is in the uppermost position, the blades will produce the closest trimming. Pushing the lever downward gradually will increase the cutting length, as a result less. hair will be cut

Install the guide Comb:

  1. Align the guide Comb with the blade edge.
  2. Slightly pressed down on it until there is a Snap in order to mount it.
    Install the guide Comb

Disassemble the guide Comb: Pull the guide comb firmly at its base (not along the teeth) until it disconnects from the clippers

Use the Rechargeable Mode

Use the Rechargeable Mode

How To Recharge

  1. Insert the charger into the rear port of clippers, connect to a power supply to begin charging.
  2. When the charging indicator light comes on, charging has commenced; when the red light changes to blue, it indicates the product has been fully charged. Cord and cordless options are available.

Assembly & Disassembly Of The Clippers

The blades must be realign if they have been removed for cleaning or replacement. As shown in the image to the right the bottom blade holes are wider than the shanks of the blades screws. After the screw of the bottom blade is loosened, adjust the distance of lower blade, and align it with the upper blade, then tighten it.

  1. The end of the upper blade teeth should pumm be 0.5mm away from the lower blade Junine] when the lever is in the uppermost
    This must be done so that the clippers will not cut too closely or allow any moving parts to come in contact with the skin.

  2. The left most tooth of the upper blade must be covering or in the left position of the first small tooth of the bottom blade.

  3. The right most tooth of the top blade must be touching the large tooth on the bottom blade.
    Assembly & Disassembly

Maintenance of Clippers

  • The clippers have been carefully tested to ensure they are oiled and aligned properly before leaving the factory.
  • To keep the clippers performing at the highest capacity they must be oiled after several uses. To oil it properly, the unit should be held so the blades are in a downward position. With the clipper blade running, dispense 2-3 drops of oil across the top blade.
    Maintenance of Clippers

ONE-YEAR WARRANTY

For more information, contact us at:
E-mail: [email protected]

UK | REP Company: Access AR Ltd
Address: Office 3, 4a Nelson Road, London, SEI0 9J8
Email: [email protected]

EC | REP
Company:
Enbaoxin Germany Maternal and Infant Supplies GmbH
Address: Laubenhof 23, 45326 Essen, Germany
Email: [email protected]

DISTRIBUTED BY
ZHUHAI SILAN KUAJINGDIANSHANG YOUXIANGONGS! ZHUHAI, GUANGDONG, CHINA, 519000

MADE IN CHINA

Documents / Resources

| GLAKER K11S Professional Hair Clipper [pdf] Instruction Manual
K11S, K11S Professional Hair Clipper, Professional Hair Clipper, Hair Clipper, Clipper
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

GLAKER User Manuals

Related Manuals