HOMCOM 713-001 Wheelchair Ramp Instruction Manual

HOMCOM 713-001 Wheelchair Ramp

Product Information

001-877-644-9366
Email: customerservice@aosom.com
Customer Care Center (CA)| Phone: 416-792-6088
Email: customerservice@aosom.ca

Product Usage Instructions

To ensure proper usage and maximize the performance of your Wheelchair Ramp, please follow the instructions below:

1. Read the entire user’s manual before using the product.
2. If you have any questions or need assistance, contact our customer care center using the provided phone numbers or email addresses.
3. Assemble the Wheelchair Ramp according to the assembly instructions provided in the manual.
4. Ensure that all components are securely connected and tightened.
5. Position the ramp on a flat and stable surface, ensuring it is level and secure.
6. Carefully guide the wheelchair onto the ramp, ensuring it is centered and aligned.
7. Always use caution and maintain a slow and controlled speed when ascending or descending the ramp.
8. Regularly inspect the ramp for any signs of damage or wear, and discontinue use if any issues are found.
9. Keep the ramp clean and free from any debris or obstacles that may obstruct the wheelchair’s movement.
10. Store the Wheelchair Ramp in a safe and dry place when not in use.

By following these instructions, you can ensure a safe and satisfactory experience with your Wheelchair Ramp. If you require further assistance or have any additional questions, please do not hesitate to contact our customer care center.

Dear customer,
Thank you for purchasing this product. So that your appliance serves you well, please read all the instructions in this user’s manual. If you have any questions, please contact our customer care center.

ASSEMBLY INSTRUCTION

IMPORTANT:  RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.

• Step 1:  Measure the rise of your application

• Step 2:  Pick the proper ramp length based on your height of use.
  Ramp Selection Qucik Reference

Ramp Length

| Over a I I  Ramp

Dimension (LXWX H)

|

Applicable Height

| Recommended Optimum Height

2FT

|

24″ X 29”  X 2″

(61 X73. 5X5cm)

|

2″ -6″        (5-15cm)

|

2″ -4″

|

(5-10cm)

3FT

| 36″ X29″ X2″

(91 X 73. 5 X 5cm)

|

4″ -9″      (10-22cm)

|

4″ -6″

|

(10-15cm)

4FT

|

48”  X 29”  X 2 11

(122X73. 5X5cm)

|

5″ -12″      (12-30cm)

|

5″ -8″

|

(12-20cm)

5FT

| 60” X29” X2” (152X73. 5X5cm)|

6″ -15”       (15-38cm)

|

6 11 -10”

|

(15-25cm)

6FT

| 72″ X29″ X2″ (183X73. 5X5cm)|

7″ -18″      (17-45cm)

|

7″ -12″

|

(17-30cm)

7FT

| 84″ X29″ X2″ (213X73. 5X5cm)|

8 11 -21″      (20-53cm)

|

8″ -14″

|

(20-35cm)

8FT

| 96″ X29″ X2″

(244 X 73. 5 X 5cm)

|

9″ -24″      (22-60cm)

|

9″ -16″

|

(22-40cm)

9FT

|

108″ X29″ X2″

(274 X 73. 5 X 5cm)

|

10″ -27″       (25-68cm)

|

10″ -18″

|

(25-45cm)

10FT

|

120″ X29″ X2″

(305 X 73. 5 X 5cm)

|

12″ -30″       (30-76cm)

|

12″ -20″

|

(30-50cm)

HEIGHT AND DIMENSIONS

NOTE : A qualified assistant is required with a ramp slope angle greater than 10 degrees.

ALUMINUM WHEELCHAIR RAMP

*MAXIMUM OCCUPIED / **** U N OCCUPIED HEIGHT LIMIT TO GROUND LEVEL

• 2′ ramp: Occupied loading: 4″ maximum, unoccupied loading height: 6″
• 3′ ramp: Occupied loading: 6″ maximum, unoccupied loading height: 9″
• 4′ ramp: Occupied loading: 8″ maximum, unoccupied loading height: 12″
• 5′ ramp: Occupied loading: 10″ maximum, unoccupied loading height: 15″
• 6′ ramp: Occupied loading: 12″ maximum, unoccupied loading height: 18″
• 7′ ramp: Occupied loading: 14″ maximum, unoccupied loading height: 21″
• 8′ ramp: Occupied loading: 16″ maximum, unoccupied loading height: 24″
• 9′ ramp: Occupied loading: 18″ maximum, unoccupied loading height: 27″
• 10′ ramp: Occupied loading: 20″ maximum, unoccupied loading height: 30″

O ccup i e d i s a p er son s itt i n g i n th e w h ee l c h a i r / scoote r w hil e l oad in g (2 : 12 s lop e o r 9.6-degree ang l e)

Unocc u p i ed i s lo ad i ng w ith n obody si ttin g in th e w h eelc h air/scoo t e r (3: 12 s lop e o r 14.5-degree __an g l e)

MAXIMUM WEIGHT CAPACITY IS 600 lbs.
(weight rating is based on evenly distributed load on 2 axles)

WARNING

• NEVER exceed the rated capacity of your ramp.
• NEVER exceed the maximum height limit listed
• Use caution at all times when loading and
• ONLY load and unload onto a stable, level vehicles
• NEVER stand in the path of equipment or vehicles. Keep bystanders and children
• DO NOT leave attached ramps
• Beware of hinged Keep all body parts clear of hinged areas.
• Ramp surfaces will have less traction when Using caution.
• Always fold and secure the ramp with the latches before using the ramp
• The ramp is not a toy. DO NOT use the ramp as a jump, scaffold, bridge, ladder, or anything other than its designed
• ALWAYS make sure the top of the ramp attaching lip is secured onto the step, landing, or vehicle before using. We strongly recommend using the supplied safety pins to prevent ramp kickouts.
• ALWAYS follow manufacturer recommendations for chairs or secured

OPERATION GUIDANCE

Loading wheelchair:

• Position the wheelchair in the direction of the ramp with the front wheel forward. Roll or ride the wheelchair slowly and steadily up the ramp, ensuring that the wheels follow the center of the ramp.
• Take extra care in wet conditions to ensure the wheels do not slide on the ramp.

Unloading wheelchair:

• Position the ramp as detailed above directly behind the rear wheel of the wheelchair. Allow the wheelchair to roll backward down the ramp, ensuring the wheels follow the center of the ramp.
• Always have a qualified assistant present when using the ramp

MAINTENANCE

• It is the user’s responsibility to check the loading ramp and components before every use. If the ramp is damaged, it should NOT be used.
• Maintain the ramp by regular cleaning. Periodically lubricate the hinges

Our contact details are below:

customerservice@aosom.com
CA| 416-792-6088| customerservice@aosom.ca

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>