BOSCH GSB 600 Professional Corded Electric Impact Drill Instruction Manual

June 13, 2024
Bosch

BOSCH GSB 600 Professional Corded Electric Impact Drill

BOSCH GSB 600 Professional Corded Electric Impact Drill-
PRODUCT

Product Information:

  • Product Name: GSB 600 Professional
  • Manufacturer: Robert Bosch Power Tools GmbH
  • Country of Origin: Germany
  • Website: www.bosch-pt.com
  • Model Number: 1 609 92A 89B
  • Date of Manual: 01.12.2022

Product Usage Instructions:

1. Safety Instructions: – Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. – Save all warnings and instructions for future reference. – Ensure that the power tool is used in a clean and well-lit work area to avoid accidents. – Do not operate the power tool in explosive atmospheres or in the presence of flammable liquids, gases, or dust. – Keep children and bystanders away from the work area to prevent distractions. – Match the power tool plugs with the outlet and avoid modifying the plug in any way. – Avoid body contact with earthed or grounded surfaces to reduce the risk of electric shock. – Do not expose the power tool to rain or wet conditions. – Do not abuse the cord and keep it away from heat, oil, sharp edges, or moving parts. – Use an extension cord suitable for outdoor use when operating the power tool outdoors. – If operating the power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. 2. Personal Safety: – Stay alert and use common
sense when operating the power tool. – Do not use the power tool while tired, under the influence of drugs, alcohol, or medication. – Always wear eye protection and use appropriate personal protective equipment such as a dust mask, non-skid safety shoes, hard hat, or hearing protection. – Ensure the switch is in the off-position before connecting to a power source, picking up, or carrying the tool to prevent unintentional starting. Please refer to the user manual for further instructions, illustrations, and specifications specific to the GSB 600 Professional power tool.

PEODUCT OVERVIEW

BOSCH GSB 600 Professional Corded Electric Impact Drill-
FIG1

Safety Instructions

General Power Tool Safety Warnings

Read all safety warnings, instruc-tions, illustrations and specifications provided with this power tool. Failure to follow all in-structions listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cord-less) power tool.

Work area safety

  • Keep work area clean and well lit. Cluttered or dark areas invite accidents.
  • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
  • Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical safety

  • Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
  • Avoid body contact with earthed or grounded sur-faces, such as pipes, radiators, ranges and refrigerat-ors. There is an increased risk of electric shock if your body is earthed or grounded.
  • Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of elec-tric shock.
  • Do not abuse the cord. Never use the cord for carry-ing, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
  • When operating a power tool outdoors, use an exten-sion cord suitable for outdoor use. Use of a cord suit-able for outdoor use reduces the risk of electric shock.
  • If operating a power tool in a damp location is un-avoidable, use a residual current device (RCD) protec-ted supply. Use of an RCD reduces the risk of electric shock.

Personal safety

  • Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
  • Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal in-juries.
  • Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or en-ergising power tools that have the switch on invites acci-dents.
  • Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal in-jury.
  • Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
  • Dress properly. Do not wear loose clothing or jew-ellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
  • If devices are provided for the connection of dust ex-traction and collection facilities, ensure these are con-nected and properly used. Use of dust collection can re-duce dust-related hazards.
  • Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe in-jury within a fraction of a second.

Power tool use and care

  • Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was de-signed.
  • Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
  • Disconnect the plug from the power source and/or re-move the battery pack, if detachable, from the power tool before making any adjustments, changing ac-cessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
  • Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
  • Maintain power tools and accessories. Check for mis-alignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
  • Keep cutting tools sharp and clean. Properly main-tained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
  • Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into ac-count the working conditions and the work to be per-formed. Use of the power tool for operations different from those intended could result in a hazardous situation.
  • Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

Service

  • Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Safety Warnings for Drills

Safety instructions for all operations

  • Wear ear protectors when impact drilling. Exposure to noise can cause hearing loss.
  • Use the auxiliary handle(s). Loss of control can cause personal injury.
  • Hold the power tool by insulated gripping surfaces, when performing an operation where the cutting ac-cessory or fasteners may contact hidden wiring or its own cord. Cutting accessory or fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.

Safety instructions when using long drill bits

  • Never operate at higher speed than the maximum speed rating of the drill bit. At higher speeds, the bit is likely to bend if allowed to rotate freely without contact-ing the workpiece, resulting in personal injury.
  • Always start drilling at low speed and with the bit tip in contact with the workpiece. At higher speeds, the bit is likely to bend if allowed to rotate freely without contact-ing the workpiece, resulting in personal injury.
  • Apply pressure only in direct line with the bit and do not apply excessive pressure.Bits can bend causing breakage or loss of control, resulting in personal injury.

Additional safety warnings

  • Switch the power tool off immediately if the applica-tion tool becomes blocked. Be prepared for high torque reactions which cause kickback. The applica-tion tool becomes blocked when it becomes jammed in the workpiece or when the power tool becomes over-loaded.
  • Hold the power tool securely. When tightening and loosening screws be prepared for temporarily high torque reactions.
  • Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held more secure than by hand.
  • Use suitable detectors to determine if utility lines are hidden in the work area or call the local utility com-pany for assistance. Contact with electric lines can lead to fire and electric shock. Damaging a gas line can lead to explosion. Penetrating a water line causes property dam-age or may cause an electric shock.
  • Always wait until the power tool has come to a com-plete stop before placing it down. The application tool can jam and cause you to lose control of the power tool.

Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place by an au-thorised customer service agent. The replacement plug should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a mains socket elsewhere.

Product Description and Specifications

Read all the safety and general instructions. Failure to observe the safety and general in-structions may result in electric shock, fire and/or serious injury.

Please observe the illustrations at the beginning of this oper-ating manual.

Intended Use
The power tool is intended for impact drilling in brick, con-crete and stone, as well as for drilling in wood, metal, ceramic and plastic. Tools with electronic control and right/left rotation are also suitable for screwdriving and thread cutting.

Product features
The numbering of the product features refers to the diagram of the power tool on the graphics page.

  1. Keyed chuck
  2. “Drilling/impact drilling” selector switch
  3. Lock-on button for on/off switch
  4. On/off switch
  5. Rotational direction switch
  6. Auxiliary handle (insulated gripping surface)
  7. Depth stop
  8. Handle (insulated gripping surface)
  9. Chuck key
  10. Screwdriver bita)
  11. Universal bit holdera)
    a) Accessories shown or described are not included with the product as standard. You can find the complete selection of accessories in our accessories range.

Technical data

Impact drill                                    GSB 600

Article number   3 601 AA0 3..
Rated power input W 600
Power output W 300
No-load speed min–1 0–3000
Impact rate at no-load speed min–1 0–48000
Rated torque Nm 1.4
Clockwise/anticlockwise ro- tation  
Spindle collar diameter mm 43

Max. drilling diameter

– Concrete mm 13
– Masonry mm 13
– Steel mm 10
– Wood mm 25
Chuck capacity mm 1.5–13

Weight according to

EPTA-Procedure 01:2014

| kg| 1.7
Protection class|  | /II

The specifications apply to a rated voltage [U] of 230 V. These spe- cifications may vary at different voltages and in country-specific mod-els.

Assembly

Auxiliary handle (see figure A)

BOSCH GSB 600 Professional Corded Electric Impact Drill-
FIG2

Do not operate your power tool without the auxiliary handle (6).

You can adjust the auxiliary handle (6) to any of 12 positions in order to achieve a safe work posture that minimises fa-tigue.
Turn the lower gripping end of the auxiliary handle (6) in ro-tational direction ➊ and push the auxiliary handle (6) for-ward until you can swivel it into the required position. Then pull the auxiliary handle (6) back again and turn the lower gripping end in rotational direction ➋ to tighten it.

Setting the drilling depth (see figure A)

  • You can use the depth stop (7) to set the required drilling depth X.
  • Turn the lower gripping end of the auxiliary handle (6) anti-clockwise and set the depth stop (7).
  • Pull the depth stop (7) far enough out that the distance between the drill bit tip and the edge of the depth stop (7) corresponds to the required drilling depth X.
  • Then turn the lower gripping end of the auxiliary handle (6) clockwise to retighten it.
  • The fluting on the depth stop (7) must face downwards.

Changing the Tool

Wear protective gloves when changing tools. The drill chuck may heat up significantly when it is used for long periods.

Keyed chuck (see figure B)

Open the keyed chuck (1) by turning it until the tool can be inserted. Insert the tool.
Insert the drill chuck key (9) into the corresponding holes of the keyed chuck (1) and clamp the tool evenly.

Screwdriving tools (see figure C)

You should always use a universal bit holder (11) when using screwdriver bits (10). Only use screwdriver bits that fit the screw head.
For screwdriving, make sure the “drilling/impact drilling” se-lector switch (2) is always set to the “drilling” symbol.

Dust/Chip Extraction
Dust from materials such as lead-containing coatings, some wood types, minerals and metal can be harmful to one’s health. Touching or breathing-in the dust can cause allergic reactions and/or lead to respiratory infections of the user or bystanders.
Certain dust, such as oak or beech dust, is considered carci-nogenic, especially in connection with wood-treatment ad-ditives (chromate, wood preservative). Materials containing asbestos may only be worked by specialists.

Avoid dust accumulation at the workplace. Dust can easily ignite.

Changing the drill chuck
If your power tool does not have a drill spindle locking mechanism, you must have the drill chuck changed by an authorised after-sales service centre for Bosch power tools.

The drill chuck must be tightened using a tight-ening torque of approx. 30–35 Nm.

Operation

Starting Operation

  • Pay attention to the mains voltage. The voltage of the power source must match the voltage specified on the rating plate of the power tool.
  • Products that are only sold in AUS and NZ: Use a resid-ual current device (RCD) with a nominal residual current of 30 mA or less.

Setting the rotational direction (see figure D – E)

Only operate the rotational direction switch (5) when the power tool is not in use.

The rotational direction switch (5) is used to change the ro-tational direction of the power tool. However, this is not pos-sible while the on/off switch (4) is being pressed.
Right rotation: To drill and to drive in screws, press the ro-tational direction switch (5) through to the left stop.
Left Rotation: To loosen and unscrew screws and nuts, press the rotational direction switch (5) through to the right stop.

Setting the Operating Mode

  • Drilling and screwdriving
    Set the selector switch (2) to the “drilling” sym-bol.

  • Impact drilling
    Set the selector switch (2) to the “impact drilling” symbol.

The selector switch (2) clicks into place and can also be ac-tuated when the motor is running.

Switching on/off
To start the power tool, press and hold the on/off switch (4).
Press the lock-on button (3) to lock the on/off switch (4) in this position.
To switch off the power tool, release the on/off switch (4); or, if the switch is locked with the lock-on button (3), briefly press the on/off switch (4) and then release it.

Adjusting the Speed/Impact Rate
You can adjust the speed/impact rate of the power tool when it is on by pressing in the on/off switch (4) to varying ex-tents.
Applying light pressure to the on/off switch (4) results in a low rotational speed/impact rate. Applying increasing pres-sure to the switch increases the speed/impact rate.

Practical Advice

  • Pull the plug out of the socket before carrying out any work on the power tool.
  • Only apply the power tool to the screw/nut when the tool is switched off. Rotating tool inserts can slip off.\
  • After working at a low speed for an extended period, you should operate the power tool at the maximum speed for ap-proximately three minutes without load to cool it down.
  • To drill into tiles, set the selector switch (2) to the “drilling” symbol. After drilling through the tile, set the selector switch to the “impact drilling” symbol and drill with impact.
  • Use carbide drill bits when working with concrete, stone and masonry.
  • When drilling into metal, only use sharpened HSS drills (HSS = high-speed steel) which are in perfect condition. The Bosch accessory range guarantees appropriate quality.
  • Using the drill bit sharpener (accessory), you can effortlessly sharpen twist drill bits with a diameter of 2.5–10 mm.

Maintenance and Service

Maintenance and Cleaning

  • Pull the plug out of the socket before carrying out any work on the power tool.
  • To ensure safe and efficient operation, always keep the power tool and the ventilation slots clean.

In order to avoid safety hazards, if the power supply cord needs to be replaced, this must be done by Bosch or by an after-sales service centre that is authorised to repair Bosch power tools.

After-Sales Service and Application Service
Our after-sales service responds to your questions concern-ing maintenance and repair of your product as well as spare parts. You can find explosion drawings and information on spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you with any questions about our products and their accessor-ies.
In all correspondence and spare parts orders, please always include the 10‑digit article number given on the nameplate of the product.

India
Bosch Service Center
69, Habibullah Road, (Next to PSBB School), T. Nagar Chennai – 600077
Phone: (044) 64561816
Bosch Service Center
18, Community Center
Phase 1, Mayapuri
New Delhi – 110064
Phone: (011) 43166190
Bosch Service Center
Shop no 7&8, Aspen garden
Walbhat road , Goregaon (E)
Near to Ram Mandir Railway Station
Mumbai – 400063
Mobile: 09819952950

You can find further service addresses at:www.bosch- pt.com/serviceaddresses

Disposal
The power tool, accessories and packaging should be re-cycled in an environmentally friendly manner.

Do not dispose of power tools along with household waste.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Bosch User Manuals

Related Manuals