ANKER A2674 67W Wall Charger User Manual
- June 13, 2024
- Anker
Table of Contents
ANKER A2674 67W Wall Charger
Product Information
The Anker 336 Charger is a wall charger with a power output of 67W. It is
part of the Anker 3 Series and has the product number A2674. The charger is
designed to comply with various regulations including FCC Rules, Electrical
Equipment (Safety) Regulations, Electromagnetic Compatibility Regulations, and
The Restriction of The Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations.
Specifications
- Product Number: A2674
- Power Output: 67W
- Charging Ports: USB-C1, USB-C2, USB-A
Usage Instructions
-
Ensure that the charger is used for indoor use only.
-
Do not treat the charger as household waste. Instead, it should be handed over to the applicable collection point for recycling electrical and electronic equipment.
-
Connect your device to one of the available charging ports on
The Anker 336 Charger:- USB-C1
- USB-C2
- USB-A
-
Make sure to use the appropriate charging cable for your device.
-
Plug the charger into a power outlet.
-
Once connected, the charger will start supplying power to your device.
-
Monitor the charging progress of your device and disconnect it once fully charged.
For more information, tutorials, FAQs, and manuals, please visit the Anker support website. To contact Anker Innovations Limited, you can reach them at Fantasia Trading LLC 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Phone: +1 (800) 988 7973
Attention
Read all the instructions before using the product.
- The product is designed for use with IT equipment only.
- Naked flame sources, such as candles, must not be placed on the product.
- The disconnection from line voltage is made by an AC plug.
- In case of broken plugs, the product must be disposed of.
- If you want to clean the product, only use a dry cloth or brush.
- The socket outlet shall be installed near the equipment and shall be easily accessible.
- The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).
Using Your Product
For the fastest and safest charge, use an Anker® cable, your device’s
original cable, or another certified cable (such as MFi)
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 (800) 988 79733
IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB003(B).
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2674 is in
compliance with Directive 2014/35/EU & 2014/30/EU & 2011/65/EU & 2009/125/EC &
2019/1782/EU. The full text of the EU Declaration of Conformity is available
at The following internet address: https://www.anker.com
Hereby, Anker Innovations Limited declares that the
product type A2674 is in compliance with Electrical Equipment (Safety)
Regulations 2016 & Electromagnetic Compatibility Regulations 2016 & The
Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations
2012 & The Ecodesign for Energy-Related Products Regulations 2010. The full
text of the GB Declaration of Conformity is available at the following
internet address: https://www.anker.comFor tutorial videos, FAQs, manuals,
and more information, please visit: Or scan the QR code below:
https://support.anker.com
Indoor use only
This symbol indicates that this product shall not be treated as household
waste. Instead, it shall be handed over to the applicable collection point for
the recycling of Electrical and electronic equipment Anker Innovations Limited
| Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
The following importer is the responsible party (contract for EU and UK
matters) Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3, 80807
Munich, Germany Anker Technology (UK) Limited | GNR8, 49 Clarendon Road,
Watford, Hertfordshire, WD17 1HP, United Kingdom
Specifications
Input
| 100V-240V~50/60Hz 1.8A
---|---
Output
|
Use One Port, OutputUSB-C1/C2: 5V 3A/9V 3A/12V 3A/ 15V 3A/20V 3.35A (67W Max)
USB-A: 4.5V 5A/5V 4.5A/5V 3A/ 9V 2A/12V 1.5A (22.5W Max)
Use Two Ports, Output/ USB-C1+USB-C2: 67W Max
USB-C1+USB-A: 67W Max
USB-C2+USB-A: 24W Max
Use Three Ports, Output/3 USB-C1+USB-C2+USB-A: 66W Max
Total Output 67W Max
PPS| Support PPS
Average active efficiency
|
84.13%
---|---
Efficiency at low load (10%)
|
69.51%
No-load power consumption
|
0.203W
Operating temperature| 0-25℃ / 32-77 ℉
Note: To ensure electrical safety and product performance, the output power may fluctuate based on the ActiveShield™ 2.0* safety mechanism when the ambient temperature is between 26- 35°C (78.8-95°F) with a high output load. ActiveShield™ 2.0 enhances protection by intelligent monitoring temperature and adjusting power output to safeguard your connected devices.
Customer Service
Please note that your rights under applicable law governing the sale of
consumer goods remain unaffected by the warranties given in this Limited
Warranty.
18-month limited warranty
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>