HYCHIKA HS1C7C Hole Saw Kit Instruction Manual
- June 14, 2024
- HYCHIKA
Table of Contents
HYCHIKA HS1C7C Hole Saw Kit
Hole Saw Kit HS1C7C
- 13PCS Saw Blade：
- 3/4 “(19mm) , 7/8″ (22mm)，1 – 1/8” (28mm)
- 1 – 1/4″ (32mm) , 1 – 1/2″ (38mm) , 1 -3/4″ (44mm),
- 2″ (51 mm) 2 -11/16 ” (68mm) 3″ (76mm)
- 3- 1/2″ (89mm) , 4″ (102mm), 5″ (127mm)
- 6″ (152mm)，
- 2pcs Mandrels
- 1 pc Installation plate
- 1pc Hex key
- 1pc package Box
- Use Hole saws with care
- Max cutting depth:25mm
- suitable for materials:timber plastic & plaster only
- Not suitab e for cutting metal &fibre cement sheeting
- Do not over tighten grub screws
- Remove debris from teeth for cutting effciency
Recommended poerating speed(RPM)
| Hole saw diameter | RPM |
|---|---|
| 19-38MM | 750 |
| 44-64MM | 550 |
| 76-89MM | 450 |
| 127- 1 52MM | 350 |
Installation method
See the picture on the right for specific installation methods.
Precautions for use
- The hole saw needs to be perpendicular to the working surface when working.
Note : Drilling cannot be performed at an angle, as this may cause damage to the drill bit.
WARNING FOR YOUR SAFETY EYE GOGGLES ARE RECOMMENDED TO BE WORN DURING
USE.
Note: Larger hole saw are recommended touse at slower speed to maxi- mise
life.Ensure pilot are sharpened regularly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>