Cync Outdoor Plug CPLGOD2BLG User Guide
- June 7, 2024
- Cync
Table of Contents
Cync Outdoor Plug CPLGOD2BLG
Simple DIY Setup
Identify where you want to mount your plug.
Mark the location for hole to be drilled.
Using 15/64″ bit, drill hole in wall for mounting screw.
Insert anchor and install screw in desired location leaving 3/16″ of the screw
exposed.
Align mounting hole with screw head, slide the bracket over the screw head and
let the plug drop down to lock into place.
Mount Plug Vertically with Sockets Facing Downwards
Unplugging Outdoor Plug
How to Set Up and Enable Voice and Out of Home Control for your Plug and
Devices
-
Plug your smart outdoor plug into the outlet.
-
Download the Cync app.
Minimum operating system requirements: AndroidTM 8 or higher or iOS 14 or higher. -
Add the Outdoor Smart Plug to the Cync app. Tip: if your outdoor smart plug has trouble connecting to Wi-Fi, make sure you are using your router’s 2.4 GHz band.
-
To enable voice control with Amazon Alexa or Google Home, enable Cync within your voice assistant app and find your devices.
Voila! Now you can control your outdoor lights and devices with your voice and away from home.
Connect with your Google Assistant or Amazon Alexa device to control your outdoor lights and devices with your voice.
Try these voice commands:
Amazon Alexa
Alexa, turn off front yard. Alexa, good morning. Alexa, turn on patio lights.
Google Home
Okay Google, turn on fountain.
Okay Google, turn off Christmas lights.
Okay Google, turn on party scene.
Additional Information and Warnings
FCC Compliance Statement Compliance Notice:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of FCC rules. Operation is subject to the
following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
WARNING: Electric Shock
To reduce the risk of electric shock, this product is equipped with a cord
having grounding type plug. This plug must be plugged into an outlet that is
properly installed and grounded. Contact a qualified electrician to install a
proper outlet if doubt exists as to whether the product is properly grounded.
Do not change the plug in any way.
- When not in use, the sockets should remain capped with the weather-resistant cover.
- Mount vertically with the sockets facing downward and be at least 30cm above ground level.
- To remove a plug from outdoor plug, hold outdoor plug’s housing and pull the plug out.
Outdoor Smart Plug
CPLGOD2BLG1
Input: 120V AC 60Hz
Output:
General use, maximum 15A in total
Motor, maximum 1/3HP
Operation temperate: -20oC ~ 50oC
IP64
Rainproof
Type 3R Enclosure
Type 1 action
Pollution Degree 3
Rated impulse voltage: 1500V
The supply cord of this control can be replaced only by the manufacturer or his accredited service agent.
Documents / Resources
| Cync
Outdoor Plug
CPLGOD2BLG
[pdf] User Guide
Cync, CPLGOD2BLG, Outdoor Plug
---|---