MOKiN B1DlcwadKPL USB C Multi Functional HUB Instruction Manual
- June 13, 2024
- MOKiN
Table of Contents
MOKiN B1DlcwadKPL USB C Multi-Functional HUB
Product Introduction
This is an alloy multi-function USB-C HUB adapter. It mainly extends the USB-C
interface of the source device to HDMI x2, USB2.0 x2, USB3.0, and USB-C
charging ports.
Note:
The USB-C source devices (mobile/notebook/tablet PC) must support video
output.
Structure Diagram
Features
- HDMI 1: 4Kx2K 30Hz / 3840×2160 max (work separately or simultaneously while the source is DP1.2 or above)
- HDMI2:
- 8K(7680×4320) 30Hz(work separately while source is DP1.4)
- 4Kx2K 60Hz / 3840×2160 (work separately while the source is DP1.2 )
- USB 2.0: Speed up to 480Mbps, 5V/[email protected].
- USB3.0: 5Gbps, 5V/[email protected]
- USB-C PD3.0: Upstream charging the source devices such as Laptop/Notebook, Support 100W power in, charging limited to 87-96W for safety, affected by different firmware.
CONNECTION
Note:
- For Video output, USB-C source devices must support video output.
- Suggest a charge for the power supply to keep it working stable.
Display Settings for Win10
Right-click desktop > Display Settings
Sound Settings for Win10
Graphics Settings for Win10
Clone Mode
Right-click desktop ›Graphics Settings > Display
Extended Desktop
Right-click desktop > Graphics Settings > Display
Graphics Settings for Mac
Mirror Display
Apple logo> System Preferences > Displays
Storage Conditions
- Ambient Operating Temperature: 0 C to 70 C (32°F to 158°F)
- Storage Temperature: -30 C to 120 C (-22°F to 248°F)
- Ambient Operating Humidity: 20%-80%RH
- Storage Humidity: 20%-90%RH
FAQ
A. Why is there no video output?
- Pls make sure your USB-C source devices support video output
- Pls check the connection is good
- Pls use a standard HDMI cable
Why is there no audio output from the HDMI port?
- Pls, make sure that there is an audio output function on the monitor.
- Pls, set the external monitor as the default audio output device.
Sometimes WiFi stops working while the hard disk is connected to the hub, How to do it?
- 2.4G network is easily disturbed. You can switch to a 5G network Or you can adjust the placement of the hard disk, and move to the suitable place.
- Win10 system, if one of the displays does not display, how do
- Right-click desktop > Graphics Settings > Select One or More Active Displays
If the USB driver cannot be identified, what to do?
- Restart the computer and reconnect the product
- If the speed is too slow when connecting the hard disk, how do
- Plug and pull out for more times
- Restart the computer and reconnect the hard disk
If the display stopped after connecting a high-current hard disk, how does
it?
Must be charged. Please supply power by power adapter.
HIGH-DEFINITION MULTIMEDIA INTERFACE
The terms HD. HOMI Hich- Definition Multimedia interface, and the HOMI Logo
are trademarks or registered trademarks of HOMI Licensing Administrator. inc