AbodeFit HEALTH 2 Person Zen Molight Far Infrared Sauna User Manual

: June 12, 2024
: AbodeFit HEALTH

Table of Contents

AbodeFit HEALTH 2 Person Zen Molight Far Infrared Sauna
Product Safety Precautions
Safety Precautions
Installation Requirements
Parts and Features
Installation Instructions
Operating Instructions
Cleaning and Maintenance
Troubleshooting
WARRANTY
Support & Service Centres
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AbodeFit HEALTH 2 Person Zen Molight Far Infrared Sauna

AbodeFit-HEALTH-2-Person-Zen-Molight-Far-Infrared-Sauna-
product

Congratulations on your purchase of the AbodeFit HealthTM Zen Molight Far Infrared Sauna. Please read the user manual carefully before using, pay special attention to the safety precautions and keep for future reference.

Product Safety Precautions

Keep young children away from this Zen Molight Far Infrared Sauna at all times.
Unauthorised dismantling of the Zen Molight Far Infrared Sauna will void warranty.

Installing your Zen Molight Far Infrared Sauna

Positioning floor board: Place the floor board in the desired location of your sauna, ensuring you know which side is the front and which side is the back.
Assembling left board: Slot the left board into the grooves on the floor board, align the corresponding battens of the back and left board and secure with 6 latches.
Assembling back board: Slot the back board into the grooves at the rear of the floor board. Make sure they are on the same line. Put the wires of back board into the cabinet to avoid pressing the wires during installation.
Assembling right board: Slot the right board into the grooves on the floor board, align the corresponding battens of the back and right board and secure with 6 latches.
Assembling front board: With one person holding the right sideand another person holding the left side, carefully lift the front board up and slide into place in side locks on the left and then right board. Take care of the glass door to avoid damage.
Assembling floor far-infrared panel heater: Position floor far-infrared panel heater in place on top of the floor board, in front of where the bench will be installed and plug it into the connection that’s attached to the back board. Secure it to the floor board with screws on either side through the slats using a screwdriver.
Assembling bench support & bench: Assemble bench support first. Slide the bench support vertically into place by ensuring the groove on the left side slots into the screw on the left board then secure it down. Repeat on the right side. Plug together black power cords. Next, slide bench horizontally into place on corresponding battens above the support. Secure on all 4 sides with screws using a screwdriver.

Congratulations on your purchase of the AbodeFit Health™ Zen Molight Far Infrared Sauna.
Please read the user manual carefully before using, pay special attention to the safety precautions and keep for future reference.

Please contact AbodeFit Health’s warranty provider, Vitality 4 Life, (details on back page) if any malfunction occurs and a qualified technician will assist you. Unauthorised dismantling of the Zen Molight Far Infrared Sauna will void warranty.

WARNING: Keep young children away from this Zen Molight Far Infrared Sauna at all times.

Safety Precautions

The Zen Molight Far Infrared Sauna is designed to be stand-alone or built-in to your bathroom, pool area or spa.
It is recommended to install the Zen Molight Far Infrared Sauna indoors for maximum protection and longevity.
If installed outside, whether it’s on a deck, veranda or in a purpose-built Cabana, it must always be completely covered and protected from the rain, moisture and otherelements in order to protect the naturally untreated Canadian Hemlock finish.
Supervise children at all times. Children over the age of 6 years may use the sauna under the supervision of adults.
Do not use the Zen Molight Far Infrared Sauna if you have an open wound, eye disease or severe sunburn.
Elderly, pregnant woman and infants should not use the sauna.
Exit the sauna immediately if you feel uncomfortable, dizzy or sleepy.
Persons with health conditions or suffering from a disease directly related to temperature should consult their doctor before using the Zen Molight Far Infrared Sauna.
CAUTION: Hyperthermia can occur when the internal temperature of your body reaches a level several degrees above normal body temperature of 37ºC (98.6°F).
The symptoms of hyperthermia include an increase in the internal temperature of the body, dizziness, lethargy, drowsiness, and fainting.
The effects of hyperthermia include failure to perceive heat and to recognize the need to exit the room, unawareness of impending hazard, fatal damage to pregnant women, physical inability to exit the room and unconsciousness.
Do not use the sauna if you are under the effects of alcohol.
WARNING: The use of alcohol, drugs, or medication is capable of greatly increasing the risk of fatal hyperthermia.
Remove all jewellery before you enter the sauna.
The door of the sauna does not include a locking or latching system which could cause entrapment inside the sauna.
To avoid fire, do not dry clothes or leave any towels in the sauna.
While in the sauna, do not touch the light bulb. If the bulb needs to be changed, switch it off and wait until the sauna is shut off and the bulb is cool.
Do not spray water on the far-infrared heating elements. This activity may result in electric shock or damage to the heating elements
Do not place pets in the sauna.

Installation Requirements

Before connecting the sauna to a power source, please ensure all the wires, cords and connections are connected properly.
Plug the Zen Molight Far Infrared Sauna into a proper wall power outlet. Do not share the same outlet with any other appliances.
Install the Zen Molight Far Infrared Sauna on a completely level surface.
Ensure the control system is in a well ventilated dry area. Do not place it next to any heat source, in direct sunlight, where there is any type of vibration or in any damp or dusty environment. It should not be placed in an area with other thermal radiating objects.
WARNING: To reduce the risk of electrocution and burns, do not operate unless heater guard is correctly in place.
CAUTION: Do not place combustible materials on or against heaters at any time.
To reduce risk of electric shock and/or fire, do not expose the control system to direct water contact or rain. Do not open the cover to the control system as there are high tension fittings that can be dangerous. Only authorised and approved dealer technicians should make any needed or necessary repairs.
Any unauthorised repairs, alterations or modificaions can lead to serious injuries, can cause the sauna to operate outside its intended specifications parameters and will void the warranty
WARNING: Reduce the risk of electrocution by disconnecting the power supply before servicing.
Do not spray the exterior with water. If the area you are installing the sauna has a tendency for dampness, place rubber matting or some other suitable barrier underneath the sauna.
Do not store flammable objects or chemical substances near the sauna.
Drink a cup of water before the sauna session. After two hours of continuous use, shut the sauna down for one hour.
If the sauna becomes too warm, open the vent in the ceiling or open the front door.
After your sauna session, turn off, and unplug the power cord.

TRANSPORTATION AND STORAGE

Avoid exposure to rain, snow or strong collisions during transport.
Do not store in damp environments.

Parts and Features

AbodeFit-HEALTH-2-Person-Zen-Molight-Far-Infrared-Sauna-
fig-1

Dust cover
Control box
LED lighting
Left board
Control panel
Side glass
Glass door
Door handle
Glass door hinge
Front board
Top board
Temperature sensor
Speaker
Ventilation
Back board
Far-infrared panel heater
Right board
Bench
Bench support
Floor far-infrared panel heater
Floor board
Latch

Installation Instructions

Installing your Zen Molight Far Infrared Sauna

Zen Molight Far Infrared Sauna 2 Person comes in 3 boxes. Make sure all parts are included before commencing assembly.

Positioning floor board. Place the floor board in the desired location of your sauna. Make sure which side is front and which side is back.
Assembling back board. Slot the back board into the grooves at the rear of the floor board. Make sure they are on the same line. One person should hold the back board in place while another person does the next step. Put thewires of back board into the cabinet to avoid pressing the wires during installation.
Assembling left board. Slot the left board into the grooves on the floor board, align the corresponding battens of the back and left board and secure with 6 latches.
Assembling right board. Slot the right board into the grooves on the floor board, align the corresponding battens of the back and right board and secure with 6 latches.
Assembling front board. With one person holding the right side and another person holding the left side carefully lift the front board up and slide into place in side locks on the left and then right board.
- Note: Take care of the glass door to avoid damage.
Assembling floor far-infrared panel heater. Position floor far-infrared panel heater in place on top of the floor board, infront of where the bench will be installed and plug it in to the connection that’s attached to the back board. Secure it to the floor board with screws on either side through the slats using a screwdriver.
Assembling bench support & bench. Assemble bench support first. Slide the bench support vertically into place by ensuring the groove on the left side slots into the screw on the left board then secure it down. Repeat on the right side. Plug together black power cords. Next slide bench horizontally into place on correspnding batterns above the support.Secure on all 4 sides with screws using a screwdriver.
Assembling the top board. One person to step inside the sauna while the other raises the top board high enough to fit between the surrounding boards. Person inside the sauna to carefully slide top board into place. Use a screwdriver to secure with screws.
- Connect all plugs and wires to the corresponding outlets on the top board.
Check sauna is operational. If you are certain that all steps have been completed correctly, check voltage of external power, to see if it matches voltage range of sauna then plug in the power line from sauna to external power and turn on at the control panel. Once you are sure the sauna is heating up, move onto the next step.
Assembling the dust cover. Position the dust cover on top of the top board ensuring the power cord is threaded through the dust cover rectangular opening on the left hand side. Use screwdriver to secure down to top board with screws.
Attaching glass door. Position glass door hinge on the outside of the right glass panel in the top position. Place hinge plate on the inside and secure with a screw using the allen key. Repeat with second glass door hinge on the bottom of the right glass panel.
- Next carefully position the center glass door in place and attach to the hinges on right glass panel by placing a hinge plate on the inside of the glass door in the bottom position and secure with screws using an allen key. Repeat in the top position.
- Take the rubber door protection strips and secure into left then right glass door panels by pushing against the strip with your hand to ensure its firmly in place.
- Lastly for door closure , take the metal door closure bracket and secure to the top of the left side glass and insert metal clip on the glass door.
Assembling the door handles. Position metal door handle on outside of glass door. Insert a washer and hold in place while you position one metal door handle brackets with another washer on the inside of the door in the top handle position. With the allen key insert a screw through the hole in the metal handle bracket, through the hole in the glass door and screw in to secure the metal handle bracket and top of the metal handle to the glass door. Repeat this step to secure the other metal handle bracket to the bottom of the metal handle.
- Check the screws are tight and the metal handle is secured well. Now take the internal wooden handle and slot into the top and bottom metal brackets and secure with an allen key.

This completes the installation process.

Operating Instructions

Operating your Zen Molight Far Infrared Sauna

AbodeFit-HEALTH-2-Person-Zen-Molight-Far-Infrared-Sauna-
fig-18

Display Screen

Display Screen – For temperature, time, FM
Power ON/OFF – When the power is turned on at the wall outlet, the sauna will beep twice to indicate power is reaching the sauna. Press Power ON/OFF button on the control panel to activate the sauna. Temperature display screen displays current temperature. Timer display screen displays the set time of last sauna session. If current temperature is lower than the temperature you have selected, the heating function will start to work. Press the “ON/OFF” button again to turn the sauna off. All heating will stop.
Light – Press the Light button to turn on/off the light inside of sauna and use remote control to choose the colour of the light.
Music Mode – Press this button to adjust bluetooth, MP3 and FM from 85.7-108.
USB Function – Press this button to start USB function
Music Selection – Press the forward and back track keys at the same time for 2 seconds to activate FM mode. Press back track button for last track and forward track key buton to move to the next track.
Temperature Control – Press the Temperature ‘+’and ‘-‘ button to adjust thetemperature. Adjustment range is 25°C-65°C. When the “Heat” indicator lamp is on, each time the “+” button is pressed, temperature will increase one degree. If pressed for three seconds, the temperature setting will increase quickly. Each time the “-” button is pressed, temperature will decrease by one degree. If pressed for three seconds, the temperature setting will decrease quickly. After the sauna reaches the desired temperature, the Heat Indicator Light will turn Off. Set the temperature and time to a comfortable level, normally, 60 minutes at 50°C-65°C. If ambient temperature is lower than 18.3°C, please set the temperature at about 50°C; and if ambient temperature is higher than 18.3°C, please set the temperature at about 65°C.
Time control – Touch the ‘+’ and ‘-’ buttons to set the timer from 5 to 90 minutes. If pressed for three seconds, the timer will increase quickly. To extend the sauna session, reset the timer again.
Pause/Play – When music playing in this mode, this key is for pause/play.
Volume control – Press ‘+’ and ‘-’ to increase or decrease volume.

NOTE: The Fahrenheit and Celcius display can be switched by pressing the temperature button “+” and “-” at the same time, then pressing the ‘Light” button to switch between Fahrenheit and Celcius.

Cleaning and Maintenance

Do not use liquid or aerosol cleansers inside the sauna.
Unplug the sauna from the power outlet on the wall before cleaning. Use plain water and a soft cloth for cleaning. Do no use benzene, alcohol or strong cleaning chemicals on the sauna. Dry with a clean dry towel.
If you are transporting the sauna, avoid exposure to rain, snow or strong collisions during transport.
Do not store the sauna in damp environments.
Do not leave the sauna on for more than 2 hours at a time.

NOTE: Use of chemicals will damage the wood and any natural protection layer inherent in the wood.

Troubleshooting

Power Indicator Light is not working| The connectors are not connected properly

No power supply input

The Power Indicator Light is faulty

| Check the connections

Check the power outlet on the wall, the power plug is connected properly & the power switch is on Contact our Customer Service

Centre, details on the last page

---|---|---
Heat Indicator Light is not working| The Heat Indicator Light or circuit board is faulty

The temperature sensor is faulty

| Contact our Customer Service Centre, details on the last page Contact our Customer Service

Centre, details on the last page

The carbon far-infrared

heaters are not heating up

| The carbon far-infrared heaters are faulty

The wire junction or the heater’s wire is loose

The temperature sensor is faulty

The circuit board is damaged

| Contact our Customer Service Centre, details on the last page Check and tighten connection

Contact our Customer Service Centre, details on the last page Contact our Customer Service

Centre, details on the last page

Light bulb is not working| The light bulb has burnt out Light bulb wiring is loose

The electrical control panel is faulty

| Replace the light bulb Tighten light bulb connectors

Contact our Customer Service Centre, details on the last page

Sauna does not power up when you press the Power On Button| Power cord is unplugged Power outlet has no power

Power supply or circuit panel is faulty

| Connect power plug correctly Check power outlet

Contact our Customer Service Centre, details on the last page

The Temperature Display Screen shows “EP”| The temperature sensor connector is loose or the sensor is faulty| Tighten the temperature sensor connector or contact our Customer Service Centre, details on the last page
The Temperature Display Screen shows “H”| The temperature inside the sauna is too high| Turn off sauna and please contact our Customer Service Centre, details on the last page
LED Lighting is not working| LED’s have burnt out Light wiring is loose

LED lighting holder is broken

The electrical control panel is faulty

| Replace the LED light Tighten light connectors

Replace the LED lighting holder

Contact our Customer Service Centre, details on the last page

WARRANTY

ABODEFIT HEALTH™ ZEN MOLIGHT FAR INFRARED SAUNA WARRANTY

Warranty Period: Lifetime Carbon Heaters, 5 Year Repair General. Vitality 4 Life are the warranty providers for AbodeFit Health™ products. Vitality 4 Life warrant this product to be free from defects in materials and workmanship while in normal domestic use for a period of five years on parts and labour from the original date of purchase.

DO NOT RETURN THE PRODUCT TO THE STORE.

LODGING A WARRANTY CLAIM

Should you experience any issues with your product, please follow these steps to lodge a warranty claim:

Contact your local Vitality 4 Life Service Centre with the following details: Your warranty details including name, email and phone number
- Product name and model number
- Product serial number, found on the rating label of the product
- Explanation of how the damage occurred
- Photos of the damage or issue is highly beneficial to expediting your claim
Vitality 4 Life will assess your claim and respond within 24-48 hours. If the Product exhibits a defect while in normal domestic use, within the warranty period; we will, at our option, either repair or replace the product or defective part free of charge.
In the event the product is required to be sent to the Service Centre, the customer is liable for all packing, freight and insurance costs for transit of the product to Vitality 4 Life. Subject to the applicable consumer laws in your jurisdiction.
If the product, or one of its parts, qualifies for replacement or service within the 30-Day period after date of purchase, Vitality 4 Life will arrange the shipping at no cost to you.
Any product sent to a Vitality 4 Life Service Centre must include a Return Authorization Form. Failure to include this form may result in the product being rejected from our warehouse or a delayed service time.
In the event that the warranty period for a product has expired, or if a Product does not qualify for warranty service, repair or replacement, consumers may still buy replacement parts or have products repaired by one of Vitality 4 Life’s Service Centres. Please contact Vitality 4 Life for further information. Vitality 4 Life will contact you with a quote prior to undertakingany service work outside of the warranty coverage.
Typical turn-around times to address warranty claims can be between 10-14 business days, plus shipping, depending on location and type of damage or warranty claim.
In no event shall our liability exceed the retail value of the product. We make no warranty with respect to parts, from asource other than Vitality 4 Life.
In the event that warranty parts or products are provided, the customer must cover the related shipping costs to receive goods.
All exchanged or substitute parts and products replaced under warranty service will become the property of Vitality 4 Life. Repaired or replaced products or parts thereof will be warranted by Vitality 4 Life for the balance of the original warranty period.
(Australia only) Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

WARRANTY DOES NOT COVER

Damage, accidental or otherwise, to the Product, not caused by direct defect in factory workmanship or materials.
Damage due to abuse, mishandling, alteration, misuse, commercial service, tampering, accident, failure to follow care, operating and handling provisions indicated in the instructions.
Damage caused by parts or service not authorized or performed by Vitality 4 Life.
‘Normal’ wear and tear that naturally and inevitably occurs as a result of normal use or aging.
Some states do not allow the exclusion or limitation of incidental or consequential damages. Therefore, the above limitations may not apply to you in the case of damage in shipment. If your product was damaged in shipment: Immediately report this type of damage to the parcel carrier and have them file an inspection report to contact the distributor from whom you purchased the product for further instructions.
You have rights and benefits under the consumer laws in your jurisdiction. Without detracting from these rights or benefits, Vitality 4 Life excludes all liability in respect of this product for any other loss which is not reasonably foreseeable from a failure of this product, which may include liability for negligence, loss of expenditure associated with the product and loss of enjoyment.