tp-link 64836 Deco M9 Plus Wall Mount Instruction Manual
- June 4, 2024
- tp-link
Table of Contents
tp-link 64836 Deco M9 Plus Wall Mount
Included: 3x brackets, 6x screws, 6x anchors
- Mount the bracket on your wall using two screws for each bracket. Use the anchors if necessary.
- Slide the Deco node into the bracket. Make sure to align the power port of the node with the top of the bracket.
- Press the node into the bracket until the clips of the bracket hold the node firmly.
Note:
It is possible to use adhesive hooks instead of screws to mount the bracket on
the wall. Hang the brackets on the hooks if you are using this method.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>