CONLAN 480390 Wave XS Software Instruction Manual
- June 12, 2024
- CONLAN
Table of Contents
A SALTO GROUP COMPANY
SOFTWARE MANUAL
WAVE XS by CONLAN
480390 Wave XS Software
The WAVE XS is a touchless button, securing high hygiene. The WAVE XS can be
installed and used for many different purposes, e.g. as exit button to open a
door, turn on the light, or call for an elevator – just a few among many other
options.
Art.no. 480390 – WAVE XS, Danish, black
Art.no. 480391 – WAVE XS, Danish, white
Art.no. 480490 – WAVE XS European, black
Art.no. 480491 – WAVE XS European, white
SOFTWARE MANUAL:
WAVE XS
WAVE XS SOFTWARE
With the WAVE XS software you can be in full control of your design. Download
and use the WAVE XS software if you want to upload your own picture or text to
be shown on the display. The software can be downloaded free of charge on the
CONLAN website under:
www.conlan.eu/downloads
Besides the software you will need an interface to connect the WAVE XS with
your PC. You can buy this directly from CONLAN (art.no. 460185).
As you can see in the picture above, the possibilities of customization
through the software are plenty.
Option 1-8 are text fields. Option 9 is for no text or icon. Option 10-14
contains 5 different icons that are already in the configuration. Option 15
gives you the opportunity to upload your own picture or icon. Option 16 is for
on-site configuration of activation time and detection range.
Remember – If you want any of the existing configurations, simply adjust the
dip switches according to the pictures to the left of the options. You will
not need the software to make these changes.
CHOOSING YOUR DESIGN AND SETTINGS
TEXT
In any of the text fields (option 1-8) you can key in a text of your choosing
with up to 3 lines of text.
Choose the number of lines to the left of the text. After you have keyed in
your text, set the dip switches on the WAVE XS according to the option in
which you have made your changes.
PICTURE OR ICON
Under settings you can upload your own dynamic icon (100×100 Px) or fullscreen
picture (240×240 Px). Set the dip switches as shown in option 15 to get the
WAVE XS to show your uploaded picture.
PICTURE OR ICON
Under settings you can upload your own dynamic icon (100×100 Px) or fullscreen
picture (240×240 Px). Set the dip switches as shown in option 15 to get the
WAVE XS to show your uploaded picture.
OTHER SETTINGS
Output time is the time of which WAVE XS stays activated after activation. Through the software you can turn the activation time from 1-240 seconds.
Sensor range is the range of which WAVE XS will detect activity. This can be
set to between 1-25 cm.
You can also choose to turn the buzzer on or off.
When you are done choosing your text, picture, or settings, configurate the
WAVE XS by clicking on the green arrow . It will hereafter be updated.
References
- art.no
- Digital Access Control Solutions - Conlan Access Security Systems
- Conlan Downloads - Documentations, Software & Catalogues
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>