Dimplex WI 120TU Water Water Monobloc Installation Guide
- June 12, 2024
- Dimplex
Table of Contents
Dimplex WI 120TU Water Water Monobloc
Product Information
The product is a Glen Dimplex Deutschland WI 120TU heat pump manager. It is an electrical distribution system designed to control and manage the heat pump in a heating or cooling system. The product is equipped with various components such as fuses, contactors, utility blocks, and sensors to ensure efficient operation.
Product Usage Instructions
- Before starting the installation, make sure to read and understand the user manual thoroughly.
- Ensure that the electrical power supply is turned off before connecting or disconnecting any components.
- Follow the provided wiring diagram to connect the product to the electrical distribution system. Use appropriate cables and connectors.
- Make sure to properly ground the product by connecting the PE (Protective Earth) wire.
- Install the fuses in the designated locations according to the specified amperage ratings.
- Connect the heat pump to the designated contactor block using the provided wiring connections.
- Install and connect any additional components such as sensors or utility blocks as indicated in the wiring diagram.
- Ensure that all connections are secure and properly insulated to prevent any electrical hazards.
- Once all the components are properly installed and connected, turn on the electrical power supply.
- Refer to the user manual for instructions on configuring and programming the heat pump manager for your specific heating or cooling system requirements.
Note: It is recommended to consult a professional electrician or HVAC technician for assistance with installation and configuration of the product.
Quick Installation Guide
Wasser WI 120TU
Hydraulic 1
Plug in
452237.66.67
FD 0211
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>