von arx DTF 35 Diamond Shaver LPG Instruction Manual
- June 12, 2024
- von arx
Table of Contents
von arx DTF 35 Diamond Shaver LPG
Product Information
DTF 35 Drum
The DTF 35 Drum is a machine that is designed for drum mounting. It comes with a set of conical nuts, butterfly screws, a wrench, and a side cover. The machine kit includes all the necessary tools for installation and usage.
Product Usage Instructions
DTF 35 Drum Mounting
- Start by unscrewing and removing the 4 conical nuts on the side cover. Refer to Figure 1 for visual guidance.
- Next, remove the side cover by tightening the 4 butterfly screws that come with the machine. Refer to Figure 2.
- Tighten the shaft nut using the wrench included in the machine kit. Refer to Figure 4.
- After tightening the shaft nut, install the side cover back in place. Use the 4 conical nuts with the cone of the nuts facing the cover. Refer to Figure 6.
Note: Make sure to follow the provided figures for proper installation and usage of the DTF 35 Drum. If you encounter anydifficulties or have further questions, please refer to the complete user manual or contact our customer support for assistance.
DTF 35 Drum mounting instruction
- Unscrew and remove the 4 conical nuts on the side cover.
- Remove the side cover by tightening the 4 butterfly screws that come with the machine.
- Slide the drum all the way to the bottom of the shaft.
- Tighten the shaft nut using the wrench included in the machine kit.
- Lock the first nut with second by using wrench included in the machine kit.
- Install the side cover with the 4 conical nuts with the cone of the nuts facing the cover.
Read User Manual Online (PDF format)
Loading......