Zhangzhou Laishike Electronic Technology FL125B LED Video Light User Manual

Zhangzhou Laishike Electronic Technology FL125B LED Video Light User Manual

Product Structure and Instruction

1. Lamp Bean: COB lamp bean
2. Bowens Mount: use for install protection cap, reflector or other Bowens accessories
3. Lock Catch: use for removal protection cap, reflector or other Bowens accessories
4. Carry Handle: use for carry the device
5. Soft Light Umbrella Mounting Hole: use for install soft light umbrella (soft light umbrella not including)
6. Soft Light Umbrella Lock Knob: use for fixing the soft light umbrella
7. LCD Display: display the data
8. Bluetooth Connect Button: use for device connect to APP
9. Right Knob: user for function selection and language setting
10. Power Switch: Turn on/off the device
11. Angle Fixing Handle: Loosen the handle to adjust the pitch angle of thelamp,and fix it after adjusted
12.  Light Frame Interface: the interface of fixing the device on the bracket
13.  Lamp Holder Fixing Knob: use for fixing the device on the bracket
14. Adapter Interface: power input interface
15. Left Knob: use for adjust the brightness or color temperature

Power Input Method

The device power by 3 pin XLR interface power supply. Polarity of the 3-pin XLR power input as below image, please note the polarityof the power input, otherwise it may damage the device.

Installation and Removal

Protection cap installation and removal

When installing the protection cap, align the protective cover with the Bowens mount points, rotate the protective cover, and fasten the protectivecover to the lamp body.

When removing the protection cap, press down the lock catch and rotatethe protection cap at the same time to take out the protection cap. Note: Be sure to remove the protection cap before using the lamp

Reflector installation and removal

When installing the reflector, align the reflector with the Bowens mount points, rotate the reflector, and fasten the reflector to the lamp body

When removing the reflector, press down the lock catch and rotate the reflector at the same time to take out the reflector.

Light frame installation and removal
The lamp can be installed and fixed on the bracket by rotating the knob clockwise, and unloaded by rotating in the counterclockwise direction

Operation Instruction

Daylight
Connecting Power, turn on the power switch Rotate the left knob (Brightness) to adjust the brightness
Brightness: 0~100% Rotate the right knob (Frequency) to adjust the mode or frequency, press toselect the mode or frequency
Mode: Normal, Paparazzi, Fireworks, Lighting, Fault Bulb, TV, Breath, Flash, Party, Flame, Music
Frequency: 0~10

Language Select: Long press the right knob (Frequency) to display thelanguage select interface, rotate the right knob to select and short press toconfirm.

Bi-color
Connecting Power, turn on the power switch Rotate the left knob (Brightness) to adjust the brightness or color temperatureBrightness: 0~100% Color Temperature Range: 2700K~6500K Rotate the right knob (Frequency) to adjust the mode or frequency, press toselect the mode or frequency
Mode: Normal, Paparazzi, Fireworks, Lighting, Fault Bulb, TV, Breath, Flash, Party, Flame, Music
Frequency: 0~10

Language Select: Long press the right knob (Frequency) to display thelanguage select interface, rotate the right knob to select and short press toconfirm.

APP Instruction

iOS APP Download

iOS user search “feelworld light” in App Storetoget

Android APP Download

or scan the QR code to download

APP Connection (e.g. Android System)

After installing the APP，please register according to the prompts. Open the APP, click “Scanner” and long press the “Bluetooth Reset” button on the device until the scanned device name as shown on the right is displayed on the APP, then click to tick and connect. After connection is successful, the Bluetooth icon will be displayed on the device screen.

When you need to reconnect after disconnection,click “Light” and select the desired connected device in the light list, click “Connect Device” to connect.

APP Operation (e.g. Android System)

After connecting, click “Scene” on the APP, and click the device name. Then you can control the color temperature, brightness, special effects, etc. for the light.

Click “WHITE LIGHT” can adjust the color temperature or brightness Remark: the daylight device can’t adjust the color temperature

Click “ LIGHTING EFFECTS” to select the effect and adjust the color temperature, brightness and frequency

Click “QUICK ADJUST” can quick adjust the single device or all

Click “System” to select the language

Product Specification

Illumination

Light Only

With Reflector

The illumination of 1M for bi-color device

Light Only

With Reflector

| 3200K| 30100lux/2796fc
---|---|---
5600K| 37600lux/3493fc
6500K| 32600lux/3029fc
225W| 2700K| 39800lux/3698fc
3200K| 49500lux/4599fc
5600K| 64500lux/5992fc
6500K| 56500lux/5249fc

General Fault Detection and Diagnosis

The light won’t start up

1. Please check whether there is loose connection between the power adapter and the power cable or the power adapter and the outlet.
2. Please check whether the voltage of power adapter is within designatedrange

LCD display is on but no light output
COB light bean or main board might be damaged. If there are still other problems, please contact with our related technologists.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated withminimum distance 20cm between the radiator & your body.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

NOTE 1: This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limits are designedto provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energyand, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

NOTE 2 : Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>