Bartscher S40 Electric Salamander Instruction Manual
- June 12, 2024
- Bartscher
Table of Contents
Bartscher S40 Electric Salamander
Product Information
Product Name: S40 Model Number: 100524
Product Name: S70 Model Number: 100528 Manufacturer: Bartscher GmbH
Address: Franz-Kleine-Str. 28, 33154 Salzkotten, Germany Phone: +49 (0) 5258
971-0 Fax: +49 (0) 5258 971-120
Safety Information: Read this instruction manual before using it and keep it available at all times! This device is designed in accordance with the presently applicable technological standards. All persons using the device must follow the recommendations and instructions in this instruction manual.
Key Symbols
WARNING! This symbol highlights hazards that could lead to injury or
death. – HOT SURFACE! This symbol is a warning that the device’s surface is
hot when in use. Ignoring this warning may result in burns! – CAUTION!
This symbol highlights dangerous situations that could lead to light injuries,
damage, malfunction, and/or destruction of the device.
Product Usage Instructions: Safety: Carefully follow the recommendations
and instructions in this instruction manual to avoid any risk of accident,
personal injury, or material damage. Pay attention to the key symbols
mentioned above. Installation: – Follow the installation instructions
provided in section 5.1 of the manual. Operation: – Follow the operation
instructions provided in section 5.2 of the manual. Cleaning: Refer to
section 6 of the manual for instructions on how to clean the product. Waste
Disposal: Follow the waste disposal guidelines mentioned in section 7 of the
manual.
Note: For detailed information about general product information,
transport, packaging, storage, technical data, liability, warranties,
copyright protection, and declaration of conformity, refer to the respective
sections in the user manual.
Read this instruction manual before using and keep them available at all times! This instruction manual contains information about the installation, operation, and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the device. In addition to the information given here, you should comply with any local Health and Safety Controls and generally applicable safety regulations. The instruction manual forms part of the product and should be kept near the device and easily accessible for anyone carrying out the installation, servicing, maintenance, or cleaning. Please keep these instructions and give them to future owners of the device.
Safety
This device is designed in accordance with the presently applicable technological standards. However, the device can pose a danger if handled improperly and inappropriately. All persons using the device must follow the recommendations and instructions in this instruction manual.
Key to symbols
In this manual, symbols are used to highlight important safety instructions
and any advice relating to the device. The instructions should be followed
very carefully to avoid any risk of accident, personal injury, or material
damage.
WARNING!
This symbol highlights hazards that could lead to injury.
WARNING!
This symbol highlights dangerous situations which could lead to injury or
death.
HOT SURFACE!
This symbol is a warning that the device’s surface is hot when in use.
Ignoring this warning may result in burns!
CAUTION!
This symbol highlights dangerous situations that could lead to light injuries,
damage, malfunction, and/or destruction of the device.
NOTE!
This symbol highlights recommendations and information aimed at effective and
trouble-free device operation.
Safety instructions
The device is not intended for use by individuals (including children) with physical or mental disabilities, insufficient experience, and/or insufficient knowledge unless such persons are under the care of a person responsible for their safety or have received instructions regarding appropriate use of the device.
- Children should be observed to ensure that they are not playing with the device.
- Never leave the device unattended when in use.
- Only use the device indoors.
- The device is not adapted for use with an external timer or remote control.
- This device may only be operated in technically proper and safe conditions.
- Prevent access of children to package materials like plastic bags and foamed polystyrene elements. Suffocation hazard!
- Only a qualified technician using original spare parts and accessories should carry out repairs and maintenance of the device. Do not attempt to repair the device yourself. Do not use any accessories or spare parts that have not been recommended by the manufacturer. These can be dangerous for the user or lead to damage to the device or personal injury, and further, the warranty expires.
- To prevent hazards and to ensure optimum efficiency, no modifications or alterations to the device that are not explicitly approved by the manufacturer may be undertaken.
- DANGER! Electric shock hazard! To avoid the hazard results please follow the safety instructions below.
- Never allow the power cable to come into contact with heat sources or sharp edges. The power cable should not hang over the side of the working surface. Ensure that no one can step on or trip over the cable.
- The power cable must not be folded, bent or tangled, and must always remain fully unrolled. Never place the device or other objects on the power cable.
- Do not lay the power cable over carpets or other inflammable materials. Do not cover the cable. Keep away the cable from the operating range and do not immerse it in water.
- Check the power cord regularly for damage. Do not use the appliance if the power cord is damaged. If this cable is damaged, it must be replaced by customer service or a qualified electrician in order to avoid danger.
- The supply cable must be disconnected from the socket only by pulling the plug. Never carry or lift the device by the supply cable.
- In any case, do not open the device housing. In case of electrical or mechanical modifications, the electric shock hazard will occur.
- Never immerse the power cord and the power plug in the water or other liquids.
- Do not use any acid agents and make sure no water ingresses the device.
- Never operate the device with moist hands or standing on a wet floor.
- Remove the plug from its socket:
- When the device is not used,
- In case of anomalies during operation,
- before cleaning.
HOT SURFACE! Burn hazard!
Follow the safety instructions listed in order to avoid the hazard:
- The grill and the housing of the device become very hot during the operation.
- Never touch them with bare hands. In order to Remove the grills and use the special handles designed for that purpose.
- Trays with food are very hot as well. Food on the grill should be removed with the use of handles and the grill should be placed on the temperature-resistant surface.
- In order to avoid burns use protective gloves or handle the plates/containers with food with the use of kitchen towels.
- The device remains hot for some time after turning it off, So before cleaning or moving the device wait until it cools down.
- Never move the device when it is switched on.
WARNING! Fire or explosion hazard! Follow the safety instructions listed in order to avoid the hazard
To avoid fire hazards and damage to the device never place kitchen utensils, towels, paper, etc. on the device or grills.
- Never use the device near flammable materials, such as alcohol, spirits, or petrol. High temperature may cause their evaporation and due to contact with the ignition sources deflagration may occur, and in a result injuries and damages.
- In case of fire before the fire extinguishing activities remove the plug from the socket or disconnect the device from the power supply. Assure sufficient flow of fresh air.
- Caution: Never use water for fire extinguishing when the device is connected to the power supply. Electric shock hazard!
CAUTION!
The device has been designed and built for commercial use and should be
operated only by qualified personnel in kitchen facilities. The operational
safety of the device is assured only in case of proper use, according to the
operation manual. All technical activities like installation and maintenance
must be performed by qualified service personnel only. The device is designed
only for heating, roasting, and grilling of food.
CAUTION!
Any use going beyond the intended purpose and/or any different use of the
device is forbidden and is not considered conventional. Any claims against the
manufacturer or his authorized representative as a consequence of experiencing
damages resulting from unconventional use are impossible. The operator is
liable for all damages resulting from inappropriate use.
General information
Liability and Warranties
All the information and instructions in this manual take into account standard
safety regulations, current levels of technical engineering as well as the
expertise and experience we have developed over the years.
The instruction manual was translated with all due care and attention.
However, we do not accept liability for any translation errors. The German
version of this instruction manual is definitive. If the delivery consists of
a special model, the actual scope of delivery may differ from the descriptions
and illustrations in this manual. This is also the case for special orders or
when the device has been modified in line with new technology.
CAUTION!
Read this manual carefully and thoroughly before any operation of the device,
and especially before turning it on! Manufacturer is not liable for any
damages or faults caused by:
- violation of advice concerning operation and cleaning;
- use other than designed;
- alterations made by the user;
- use of inadequate spare parts.
- We reserve the right to make technical changes for purposes of developing and improving the useful properties.
Copyright protection
The instruction manual including any texts, drawings, images, or other
illustrations is copyrighted. No part of this publication may be reproduced,
transmitted or used in any form or by any means without permission in writing
from the manufacturer. Any person who commits any unauthorized act in relation
to this publication shall be liable to claims for damages. All rights
reserved.
NOTE!
The contents, texts, drawings, pictures and any other illustrations are
copyrighted and subject to other protection rights. Any person unlawfully
using this publication is liable to criminal prosecution.
Declaration of Conformity
The device complies with the current standards and directives of the EU. We
certify this in the EC declaration of conformity. If required we will be glad
to send you the declaration of conformity.
Transport, packaging, and storage
Delivery check
Please check the delivery upon completeness and transport damage immediately
after receipt. In case of visible damage do not accept or accept the delivery
with reservation only. Note the extent of damage on the carrier’s bill of
delivery. Trigger off the complaint. Hidden damages should be reclaimed
immediately after notice, as claims for damages can only be asserted within
the effective period for complaints.
Packaging
Please do not throw away the covering carton of your device as it might be
useful for storage purposes, when moving, or, in case of damages, when the
device must be sent back to a repair center. The outer and inner packing
material should be removed completely from the device before installation.
NOTE!
If you would like to dispose of the packing, consider the regulations
applicable in your country. Supply reusable packing materials to the
recycling. Please inspect the device upon completeness. In case any part is
missing, please contact our customer service center immediately.
Storage
Keep the package closed until installation and under consideration of the
outside indicated positioning- and storage markings. Packages should be stored
under consideration of the following:
- Do not store outdoors;
- Keep it dry and dust-free;
- Do not expose it to aggressive media;
- Do not expose it to direct sunlight;
- avoid mechanical shocks and vibration;
- In case of longer storage (> 3 months) make sure you check the state of the packaging and the parts regularly, if required refresh or renew.
Technical data
Overview of parts
100524
- Housing
- Grill guide
- Power indicator (green)
- Heating indicator
- Temperature control
- Feet (4)
- Grill with anti-tilt device
- Crumbs tray
- Grill Handle
- Ventilation holes
100528
-
Housing
-
Handle for grill position change (2)
-
Bracket for setting grill position
-
Grill
-
Grill Handle
-
Crumbs tray
-
The heating indicator left zone
Operation elements -
Power supply (green), left zone
-
Temperature controller left zone
-
Heating indicator, right zone
-
Power supply (green), right zone
-
Temperature controller, right zone
-
Feet (4)
-
Ventilation holes
Technical specification
| Name | Salamander S40 |
|---|---|
| Code-No.: | 100524 |
| Material: | nickel-chrome steel 18/10 |
Realization:
| ■ infrared emitting heater “Incoloy“
■ grill with anti-tilt device, W 430 x D 305 mm
■ indicator
Power supply:| 2.2 kW / 230 V 50 Hz
Dimensions:| W 597 x D 368 x H 365 mm
Weight:| 13.8 kg
Equipment:| crumbs tray
Name| Salamander S70
---|---
Code-No.:| 100528
Material:| nickel-chrome steel 18/10
Realization:
| ■ 2 heating zones
■ infrared emitting heater “Incoloy“
■ grill of variable vertical position, W 640 x D 300 mm
■ indicator
Power supply:| 4.4 kW / 400 V 50 Hz 3 NAC
Dimensions:| W 878 x D 500 x H 370 mm
Weight:| 21.4 kg
Equipment:| crumbs tray
We reserve the right to make technical changes!
CAUTION!
Any installation, connection, and maintenance work related to the device must
be performed by a qualified and certified technician in accordance with the
applicable international, national, and local regulations.
Positioning
- Unpack the device and dispose of all packing material.
- Place the device on top of an even, stable, dry, and water-resistant surface that supports the weight of the device and is not heat-sensitive.
- Never place the device in a humid or wet environment.
- Never place the device on flammable surfaces.
- Never place the device near flammable materials.
- The installation place must be easily accessible and sufficiently spacious to allow for easy operation of the device and good air circulation.
- Maintain a distance of at least 10 cm to the walls and other objects.
- Remove the protective foil from the device before use. Remove the foil slowly in order to not leave the glue residuals. Any glue residuals may be removed with the use of proper solvent.
CAUTION!
Never remove the rating plate and any warning signs from the device.
Connection
DANGER! Electric shock hazard! The device can cause injuries due to
improper installation! Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of compliance!
- Before connecting the device make sure that the voltage and frequency values on the rating plates are consistent with the existing electric installation. The allowable voltage deviation is ±10%.
- Make sure that the available electric connection conforms to the valid regulations and is equipped with protective wire. Use the cable of the sufficient cross-section for connection to the power supply.
- Between the device and the electric system, there must be a multipole switch installed, appropriate for the device’s power. The switch of contact separation of at least 3 mm must be easily accessible.
- Connect the device to the electric installation according to valid international, national, and local regulations.
- The device 100524 is equipped with a connection cable with a plug (single-phase 230 V). In order to connect to the power supply just insert the plug into the earthed socket with protective contact.
Operation
Before the first use
- Before the device operation clean it and its equipment according to the instructions in section 6 “Cleaning”.
- Place the grill in the device. Select grill level according to preparation method or size of dishes.
- In device 100524 insert the grill with the anti-tilt device into the guides (at the bottom, in the middle, at the top).
- The grill of variable vertical position in device 100528 is positioned in the following way: use the handle to insert the grill; set the required height with the use of both handles for grill position adjustment, tilting them towards inside and locking in the height adjustment bracket
- Place the supplied crumbs tray under the grill.
CAUTION!
Keep in mind that the crumbs tray should be placed under the grill in the
device to receive crumbs created during the preparation of food.
Settings
- Connect the device to the power supply. The green power indicator will come on.
- The device 100524 is equipped with one infrared emitting heater “Incoloy” and the device 100528 is equipped with two such heaters. Each radiator allows for independent power adjustment, depending on the food preparation method, and each is equipped with resistive heaters controlled by the temperature controller (Simmerstat).
- Temperature setting (levels 1 – 3) is realized with the use of an appropriate temperature controller.
The heating indicator comes on when the temperature controller is moved. After reaching the preset temperature the indicator goes off and comes on again when the temperature in the device drops below the setpoint and the controller reactivates the heater. That process is repeated until the temperature controller is set in position “0” (OFF).
Food preparation
- Place selected food in appropriate dishes (e.g. plates, baking molds, etc.) on the grill under the selected infrared radiator. Depending on the preparation method or size of containers select suitable grill guides (lower, central, upper).
- Food must not touch the heaters!
CAUTION!
The device is not designed for food preparation directly on the grill, always
use appropriate heat-resistant dishes (containers). Use the temperature
controller to set the appropriate temperature level (1 – 3) in the selected
heating zone. For roasting and grilling use the highest temperature level 3,
levels 1 and 2 are designed for heating or maintaining temperature.
CAUTION!
The device must be supervised during operation as any defect may cause
overheating and damage of the device!
HOT SURFACE! Burn hazard!
The grill and dishes become very hot during the operation. Food on the grill
should be removed with the use of handles and the grill should be placed on
the temperature-resistant surface. In order to avoid burns use protective
gloves or handle the plates/containers with food with the use of kitchen
towels.
- Carefully remove prepared food.
- When the device is no longer used set the temperature controllers to “0” and disconnect the device from the power supply.
- Allow it to cool down.
- Remove and empty the crumbs tray. Clean the crumbs tray periodically with the use of a soft moistened cloth and warm water. Dry the tray thoroughly before placing it in the device.
Cleaning
WARNING!
Before cleaning disconnect the electric power supply and wait for the device
to cool down. Never clean the device with the use of a water jet! Be careful
and do not let the water into the device.
CAUTION!
Use only soft cloths, and never use any abrasive cleaning agents that could
scratch the device’s surface.
Cleaning
- Due to hygienic reasons and to remove the defects the device should be cleaned after each working day, and when required between the grilling processes as well.
- Remove the grill and crumbs tray from the device, wash them with the use of a gentle cleaning agent, and rinse in clean water.
- Clean the interior and exterior of the device with the use of common degreasing agents.
- Make sure that used cleaning agents are approved for use with food.
NOTE!
Follow the instructions of the cleaning agent manufacturer!
- Then rinse the device with clean water and dry it with the use of a soft cloth.
- Do not allow for prolonged contact of the device surfaces with concentrated acids, vinegar, salt solution, or spice mixtures. Such products should be removed as quickly as possible to avoid material damage.
- Periodically check and clean the ventilation slots to avoid air circulation problems in the device. Clean the device with plastic brushes.
Storage of the device
If the device is not used for a long time, clean it thoroughly as described
and store it in a place that is clean, dry, frost-free, protected from the
sun, and inaccessible to children. Do not place any heavy objects on the
device.
Waste disposal
Discarding old devices At the end of its service life the discarded device has
to be disposed of in accordance with the national regulations. It is advisable
to contact a company which is specialized in waste disposal, or just contact
the local disposal service in your community.
WARNING!
To exclude any abuse and the dangers involved make the waste device unfit for
use before disposal. For that purpose disconnect the device from the main
supply and remove the main connection cable from the device.
CAUTION!
For the disposal of the device please consider and act according to the
national and local rules and regulations.
Bartscher GmbH
Franz-Kleine-Str. 28 33154 Salzkotten phone: +49 (0) 5258 971-0
Germany fax: +49 (0) 5258 971-120
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>