Bartscher 100080 Thermo Transport Container Instruction Manual
- June 13, 2024
- Bartscher
Table of Contents
Bartscher 100080 Thermo Transport Container
Technical information
Name:
- Thermo transport container 20L
Article number:
- 100080
Construction:
- Chrome-nickel steel 18/10, brushed
- Lid with four latches and silicon seal
- 1 handle, 1 side swinging handle
- ventilation duct
- stackable
Capacity:
- 20 litres
Dimensions:
- Ø 370 mm; H 340 mm
Weight:
- 6.0 kg
Parts
① Latch
② Handle
③ Container
④ Swinging handle
⑤ Lid
⑥ Ventilation duct
The thermo transport container is intended for transporting cold and warm liquids and food products.
Tips for the user
-
Unpack the thermo transport container and remove all packing material.
-
Loosen the latches and remove the lid from the container.
-
Wash the container and lid with silicon seal in warm water and with a mild cleaning agent before and after use.
-
Rinse in clean water and leave to dry, or wipe dry with a soft cloth.
-
Use only soft cloths and never use any abrasive cleaners that could scratch the surface.
-
Use commercially available stainless steel cleaning agents for cleaning the exterior of the transport container.
-
Fill the clean thermo transport container with a desired hot/cold liquid or food product (maximum 20 litres), cover with the lid and secure using the latches. These ensure safe transport of the container’s contents.
-
The transport container’s double walls ensure proper isolation. Heat loss amounts to approx. 6°C per hour.
-
Open the container and pour out the desired amount of liquid or take out the desired amount of food as needed. To empty the thermo transport container, use the handle and side swinging handle (see diagram at right).
Customers Support
Bartscher GmbH Franz-Kleine-Str. 28 D-33154 Salzkotten Germany
phone: +49 (0) 5258 971-0
fax: +49 (0) 5258 971-120