ELECTRALITE INS ELA 38873 Emergency Slimline 5W LED Exit Box Instruction Manual

June 12, 2024
ELECTRALITE

INS ELA 38873 Emergency Slimline
5W LED Exit Box
Instruction Manual

INS ELA 38873 Emergency Slimline 5W LED Exit Box

Helpline
If you receive this item with parts broken or missing, please telephone: 0333 0050077
Please have ready your name, address, tel. no., product reference, where purchased and parts required.
An answering service is in operation outside office hours and during busy periods.
We regret that we are unable to give advice on internal house wiring.
**** Cascade Holdings Ltd, Gorse Mill, Gorse Street, Chadderton, Oldham. OL9 9RJ
EU Authorised Representative: Authorised Rep Compliance, Ground Floor, 71 Lower Baggot Street, Dublin, Ireland, D02P593

**** This product should be disposed of responsibly at the end of its life. Please recyclewhere facilities exist.
Check with your Local Authority or retailer for recycling advice (Waste Electrical and Electronic Equipment Directive)

ELECTRALITE INS ELA 38873 Emergency Slimline 5W LED Exit Box - Figure
1| ELECTRALITE INS ELA 38873
Emergency Slimline 5W LED Exit Box - Figure 2
---|---

CHANGING LEGEND

ELECTRALITE INS ELA 38873 Emergency Slimline 5W LED Exit Box - Changing
Legend

IMPORTANT INSTALLATION INFORMATION

  • Installation should be carried out by a qualified electrician in accordance with the latest edition of the National wiring regulations.
  • These lumi nai res are for indoor use onl y
  • MaximumInputVoltage-220V-240VAC50Hz
  • Ensure that ALL electrical connections are tight without any loose strands.
  • Before commencing installation or maintenance, ensure electricity is switched off at the mains.
  • Class II, Double Insulated and earth is not required.
  • This luminaire is not dimmable.
  • Fitting only suitable to be used with round cable.

EMERGENCY TESTING

After connecting the mains supply check the following:

  1. The unit should be left on charge for a minimum of 24 hours uninterrupted supply before testing the emergency mode.
  2. There is one green indicator in the middle. After power is on the LED indicator will be on. The LED indicator is off when the fixture is in emergency mode.
  3. To simulate normal mains supply failure, operate your key switch.
  4. The lamp will now light under emergency conditions.
  5. When the unit no longer meets its rated duration of operation the battery pack must be replaced with a battery of the same type, voltage and Amp-hour rating.

Emergency Installation and Inspection

Installation/Test Record| Serial Number:|
---|---|---
Installed By:| | Date:|
Commissioned By:| | Date:|
| Year 1| Year 2
The  battery must be replaced| Year 3| Year 4*
Monthly test| Signed| Date| Signed| Date| Signed| Ein H;| Signed| Date
1| | | | | | | |
2| | | | | | | |
3| | | | | | | |
4| | | | | | | |
5| | | | | | | |
6| | | | | | | |
7| | | | | | | |
8| | | | | | | |
9| | | | | | | |
10| | | | | | | |
11| | | | | | | |
12| | | | | | | |

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals