ELECTRALITE INS ELA 38872 5W Emergency LED Twin Spot Instruction Manual
- October 30, 2023
- ELECTRALITE
Table of Contents
ELECTROLYTE INS ELA 38872 5W Emergency LED Twin Spot
Product Information
- Product Name: Not Mentioned
- Manufacturer: Cascade Holdings Ltd
- Manufacturer Address: Gorse Mill, Gorse Street, Chadderton, Oldham. OL9 9RJ
- Helpline Number: 0333 0050077
- Usage: Not mentioned
- Disposal: The product should be disposed of responsibly at the end of its life. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice (Waste Electrical and Electronic Equipment Directive)
Product Usage Instructions
- If you receive this item with parts broken or missing, please contact the helpline number mentioned above.
- Provide your name, address, telephone number, product reference, where purchased, and parts required for assistance.
- The answering service is available outside office hours and during busy periods.
- The manufacturer does not provide advice on internal house wiring.
- Refer to the current edition of the National Wiring Regulations for installation guidance. If in doubt, consult a qualified electrician.
- The product has a knockout for cable entry. Use the included IP gland to maintain an IP65 rating.
- The product has a test switch and indicator lights for ON, OFF, battery charging, and battery discharging or faulty status.
- The product has N-Neutral and L-Live connections.
Helpline
- If you receive this item with parts broken or missing, please telephone: 0333 0050077
- Please have ready your name, address, tel. no., product reference, where purchased, and parts required.
- An answering service is in operation outside office hours and during busy periods.
- We regret that we are unable to give advice on internal house wiring.
This product should be disposed of responsibly at the end of its life. Please recycled where facilities exist. Check with your Local Authority or retailer for recycling advice (Waste Electrical and Electronic Equipment Directive)
INSTALLATION
PORTANT INSTALLATION
INFORMATION
- Installation should be carried out in accordance with the current edition of the National Wiring Regulations. If in doubt, consult a qualified electrician.
- Maximum Input Voltage– 220V-240V AC 50Hz
- Ensure that ALL electrical connections are tight with no loose strands.
- Before commencing installation or maintenance, ensure electricity is switched off at the mains.
- Class II, Double Insulated earth is not required.
- This luminaire is not dimmable.
- All green charge indicator LEDs are illuminated when the battery is charging. During situations where there is no power from mains electricity and the battery is discharging, all green charge indicator LEDs will be off.
Emergency Installation and Inspection
Installation / Test Record
| Serial / Luminaire Number:|
---|---|---
Installed By:| | Date:|
Commissioned By:| | Date:|
| Year 1| Year 2| Year 3| Year 4*
---|---|---|---|---
Monthly test| Signed| Date| Signed| Date| Signed| Date| Signed| Date
1| | | | | | | |
2| | | | | | | |
3| | | | | | | |
4| | | | | | | |
5| | | | | | | |
6| | | | | | | |
7| | | | | | | |
8| | | | | | | |
9| | | | | | | |
10| | | | | | | |
11| | | | | | | |
| 12| | | | | | | | |
| | | | | | | |
- EU Authorised Representative: Authorised Rep Compliance,
- Ground Floor, 71 Lower Baggot Street, Dublin, Ireland, 002P593
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>