U S SOLID JFMSV00201 Motorized Ball Valve Instruction Manual

: June 12, 2024
: U S SOLID

Table of Contents

U S SOLID JFMSV00201 Motorized Ball Valve
Product Usage Instructions
Specifications
INSTALLATION AND MAINTENANCE
WIRING SCHEMATIC
INSTRUCTIONS OF ENVIRONMENT PROTECTION
SPECIFICATIONS
WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

U S SOLID JFMSV00201 Motorized Ball Valve

Product Information:

The U.S. Solid Motorized Ball valve is a high-quality valve designed for installation and maintenance purposes. It follows National Standards for pipe thread, using NPT in the U.S.A. and BSPT in Europe. The valve is made of either SS304 or Brass material, depending on the model. It has a maximum torque of 2.5 N m and provides a fast open/close time.

Product Usage Instructions

Threading: Ensure proper sealing of the valve by using teflon tape on the NPT threading.
Wiring Schematic: When the circuit is closed (switch connecting the valve is on), the valve will open and remain open. When the circuit is open (switch connecting the valve is off or power is lost), the valve will close and remain closed.
Manual Operation:
Ensure power is off before manually operating the valve.
Lift the hand-wheel gently and turn it left or right until the valve is in place.
The valve is fully closed when the red line on the position indicator points to CLOSED (vertical to the pipe). The valve is fully open when it points to OPEN (parallel to the pipe).
Press down the hand-wheel after manual override operation to ensure proper valve functionality when power is supplied.
Frequently Asked Questions:
Does the valve require water or air pressure to work?
Answer: No, the motorized ball valve can work with little water pressure, including gravity-fed arrangements.
Can this valve be actuated manually?
Answer: Yes, the valve can be operated manually.
Will this return to closed if power goes out?
Answer: Yes, the valve will return to the closed position if power is lost.
Can this valve be used outside?
Answer: The motorized ball valves have an IP65 rating, making them resistant to water spray. However, it is recommended to enclose the valve in a protective housing if permanently installed outdoors.
Can this motorized ball valve be powered continuously?
Answer: Yes, these valves can be powered continuously without the risk of overheating due to their power limiting features.

Specifications

Bore Type: Full (201, 203, 202, 204), Standard (205, 206, 207)
Valve Body Material: SS304 (Stainless Steel), Brass
Max. Torque: 2.5 N m
Open/Close Time: [Not provided in the text-extract]

INSTALLATION AND MAINTENANCE

MOTORIZED BALL VALVES

Thank you for purchasing your U.S. Solid Motorized Ball valve. We are happy to have you as a customer! We want you to get the most out of your new equipment, so we have included a few pointers to get you started. Unfold this manual for simple wiring diagrams, schematics, and specifications on your valve.

THREADING
U.S. Solid Valves follow National Standards for pipe thread. In the U.S.A. we use NPT, while in Europe we use BSPT. We recommend use of teflon tape to ensure seal of the NPT threading, as shown in the figure to the left.

WIRING SCHEMATIC

When the circuit is closed (switch connecting the valve is on), the valve will open, and remain open. Once open, the valve is de-energized.
When the circuit is open (switch connecting the valve is off or power is lost), the valve will close and remain closed. Once closed, the valve is de-energized.

HOW TO OPEN or CLOSE MANUALLY

It is only permitted to use when power is off.
Lift the hand-wheel① gently and turn it left or right until the valve is in place.
The valves is fully closed when the red line on the position indicator② points to “CLOSED”(vertical to the pipe). Likewise, the valve is fully open when it points to “OPEN”(parallel to the pipe).
Press down hand-wheel when manual override operation is finished so that the valve can work properly when power is supplied.

FREQUENTLY ASKED QUESTIONS

Does the valve require water or air pressure to work?
Answer: No! One of the benefits of motorized ball valves is they can work with little water pressure. This means a motorized ball valve can work even with gravity fed arrangements.
Can this valve be actuated manually?
Answer: Yes.
Will this return to closed if power goes out?
Answer: Yes.
Can this valve be used outside?
Answer: The motorized ball valves all have a rating of IP65, which means they can withstand spray from water. However, if permanently installed outdoors, it is recommended that you enclose the motorized ball valve in some protective housing.
Can this motorized ball valve be powered continuously?
Answer: Due to the power limiting features of these valves, they can be hooked up to power non-stop without risk of overheating.

INSTRUCTIONS OF ENVIRONMENT PROTECTION

At the end of its life cycle, please do not dispose of this equipment by throwing it in the usual garbage. Instead, hand it over at a collection point for the recycling of electrical an electronic appliances. It does not contain dangerous nor toxic products for humans, but inadequate disposal could still damage the environment. The materials are recyclable as mentioned. By recycling material or through other forms or repurposing old appliances, you are making an important contribution to the protection of our environment.
Please inquire with your local community authorities for the proper disposal location.

SPECIFICATIONS

Models:

USS-MSV00…

| 201 203

202 204

|

205

| 206

207

---|---|---|---
Bore Type| Full| Standard
Valve Body

Material

|

SS304

|

Brass

Temp. Range

|

0°C to 90° C

Ambient Temp.

Range

|

-5°C to 40° C

WARRANTY

All U.S. Solid motorized ball valves come with a one year warranty.
We realize that other questions or concerns may arise during the installation and operation of your valve. Please contact us or visit our website for help.

Phone: 800-209-4177
Email: service@ussolid.com
Website: www.ussolid.com

U.S. Solid®•USS2- Models • All Rights Reserved • Page 2
U.S. Solid® • 1200 E.55th Unit C, Cleveland, OH, 44103 • www.ussolid.com