U S SOLID NZ-1 Hand Coil Winder Counting Winding Machine User Manual
- June 9, 2024
- U S SOLID
Table of Contents
U S SOLID NZ-1 Hand Coil Winder Counting Winding Machine
Product Information
NZ-1 Hand Coil Winder Counting Winding Machine
The U.S. Solid NZ-1 Coil Winder is designed for use in the telecommunication and electrical equipment industries to produce coils for magnetic heads, various kinds of recorders coils, inductance instruments hummers relays, timers, TV sets and more. The winder comes equipped with a counter which can count up to 99999 rings, making it easy to determine the amount of rings on the coil. The maximum diameter of coils fit to be wound is 150 mm, while the maximum length of coils fit to be wound is 100 mm. The transmission ratio of the machine is 1:8.
Product Usage Instructions
- Mount the machine on a sturdy workbench using the three holes provided on the machine.
- Regularly apply some lube oil into the oil filter holes of the spindle to ensure smooth operation.
- Before operating the machine, turn the reset handle of the counter and let it reverse to 00000. It is recommended to turn the reset handle twice so that the entire counting gear comes into the reset condition. This will prevent any slipping of the gear and ensure accurate counting. Please do not turn the reset handle when the machine is running.
Thank you for choosing U.S. Solid as your preferred supplier of high-quality Hand Winding Machines. We are confident that this product will contribute to your success in your industry.
Our U.S. Solid NZ-1 Coil Winder is used in the industries of telecommunication and electrical equipment to produce coils for magnetic heads, various kinds of recorders coils, inductance instruments hummers relays, timers, TV sets and so on. This winder has a counter which is easy to read when determining the amount of ringsonthe coil. It will count up to 99999 rings. Let U.S. Solid contribute to your success with this HandWinding Machine.
Specifications
- The maximum diameter of coils fit to be wound: 150 mm.
- The maximum length of coils fit to be wound: 100 mm.
- The maximum number of turns to be counted: 99999.
- Transmission ratio: 1:8.
Operation
- This machine should be mounted on a sturdy worked bench. There are three holes in the machine for fastening it to the workbench.
- Regularly put some lube oil into the oil filter holes of the spindle.
- Please turn the reset handle of the counter and let it reverse to “00000” before the machine goes to work. It is required to turn the reset handle twice so as to have the whole counting gear come into the reset condition, otherwise, it will be possible for the gear to slip and thus lead to inexactness in counting. Please do not turn the reset handle when the machine is running.
Thank you for purchasing from us.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>