IOGEAR GUD3C04-Q1595 2-Port USB-C KVM Switch with Power Delivery User Guide

June 12, 2024
Iogear

IOGEAR logo GUD3C04-Q1595 2-Port USB-C KVM
Switch with Power Delivery
User GuideIOGEAR GUD3C04 Q1595 2 Port USB C KVM Switch with Power
Delivery

Quick Start Guide
2-Port USB-C™ KVM Switch with Power Delivery
GUD3C04

PART NO. Q1595

Package Contents

1 x 2-Port USB-C KVM Switch
2 x USB-C to USB-C Cables
1 x Remote Port Selector
1 x Quick Start Guide
1 x Warranty

System Requirements

Console

  • HDMI monitor
  • Standard wired USB keyboard
  • Standard 3-button wired USB mouse

Computers

  • USB-C sources with DP Alt mode over USB-C

Power

  • For optimal performance, we recommend using a Limited Power Source (LPS) certified USB-C PD 100W power supply

Operating Systems

  • Windows 10 (32/64 bit)+
  • Mac OS X 10.12+
  • Mac iOS X 10.12+ (iPad Pro ® 2018¹ )
  • Android 8+²

¹iPad Pro supports mirror video mode and USB keyboard
²Samsung DeX supported on Galaxy S10/S10+/S10e, Note9, S9/S9+, Note8, S8/8+, and Tab S4. Other Android devices support mirror screen.
Samsung and DeX are trademarks of Samsung Electronics Corp., Ltd. This product is not manufactured, sponsored, licensed or distributed by Samsung Electronics.

Overview

  1. USB-C power port (USB-C power supply not included in the package).

  2. Power Delivery pass-through requires USB-C external power adapter. For optimal performance, please use a Limited Power Source (LPS) certified USB-C PD 100W power supply The first 15W will supply the KVM, the next 10W  will supply USB-C device connected to port #2, the last 75W will supply USB-C device connected to port #1. If no external power is connected, the KVM will draw 15W from USB-C device connected to port #1.

  3. HDMI video output
    Up to 3840 x 2160 @30Hz for USB-C laptop sources
    Up to 1920 x 1200 @60Hz for USB-C smartphone sources

  4. Remote selector port.

  5. 2 x USB 3.0 Type A ports for peripheral sharing.

IOGEAR GUD3C04 Q1595 2 Port USB C KVM Switch with Power Delivery -
peripheral sharing

Hardware Installation

Step 1
Connect an external USB-C power adapter (optional and not included) to the power port and the power source to support Power Delivery. We recommend not removing power source during setup. Step 2
Connect the included USB-C cable from your USB-C computer to primary port #1 (up to 75W power delivery when an external USB-C power is connected).

Step 3
Connect the included USB-C cable from your second USB-C device to port #2 (up to 10W power delivery when an external USB-C power is connected).

Step 4
Connect an HDMI cable to the video output port and to an HDMI monitor.

Step 5
Connect the USB-A peripheral devices to the USB-A ports.

Step 6
Connect the included remote port selector to the 2.5mm port. Click on the remote selector to switch between the two connected USB-C devices.

Step 7
Port LED will light up, indicating which port is selected and has KVM focus on.
Both port #1 and port #2 LED will flash if the KVM is drawing power more than 15W, and thus, needs to be connected to an external USB-C power adapter.

Compliance Information

Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital service, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in  accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to  radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna
– Increase the separation between the equipment and receiver
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
– Consult the dealer or an experienced radio/TV technician for help
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
CE Statement:
This device has been tested and found to comply with the following European Union directives: Electromagnetic Capability (2004/108/EC), Low Voltage (2006/95/EC) and R&TTED (1999/5/EC).

Limited Warranty

Warranty Information
This product carries a 3 Year Limited Warranty. For the terms and conditions of this warranty, please go to https://www.iogear.com/support/warranty
Register online at https://www.iogear.com/register
Important Product Information
Product Model
Serial Number

Contact
WE’RE HERE TO HELP YOU!
NEED ASSISTANCE SETTING UP THIS PRODUCT?
Make sure you:

  1. Visit www.iogear.com for more product information
  2. Visit www.iogear.com/support for live help and product support

IOGEAR logoIOGEAR
https://iogear.custhelp.com
support@iogear.com
www.iogear.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals