sOmfy IZYMO nMotor Receiver Instructions

: June 12, 2024
: somfy

sOmfy IZYMO nMotor Receiver Instructions

Safety and liability

Liability

These instructions must be kept by the user. Failure to follow these instructions or use of the product outside its field of application is forbidden and will invalidate the warranty and discharge Somfy of all liability. This Somfy product must be installed by a professional drive and home automation installer. Moreover, the installer must comply with the standards and legislation currently in force in the country in which the product is being installed, and inform his customers of the operating and maintenance conditions for the product. Never begin installing without first checking the compatibility of this product with the associated equipment and accessories. If in doubt when installing this product and/or to obtain additional information, contact a Somfy representative or visit the website www.somfy.com.

Safety instructions

Never use the product if it is not correctly installed and placed inside a connecting box in conformity with the current norms.
Do not use or install this product outdoors.
If used with a motor, you should also consult the instructions provided with the motor.
Keep the product out of the reach of children.
Do not knock or drop the product, expose it to flammable materials or sources of heat or moisture, or splash or immerse it. Keep the product far away from liquids

Caution : danger of electrocution

Before any installation make sure the power supply is disconnected to avoid any risk of electrocution.
Directly cut the power supply from the breaker box to avoid any risk of electrocution. This product is designed to be used power up, a wrong installation can create a fire or an electric shock.
This product must be installed and connected carefully following these instructions. Cut the power supply before any operation and don’t do any modification if the LED is still on.

Product description

The IZYMO MOTOR RECEIVER Zigbee receiver is a radio micro receiver designed for use in home automation systems operated under Zigbee protocols. It enables the control of a roller shutter, awning, or external venetian blind motor via a smartphone or Somfy TaHoma switch. It can also act as a Zigbee router to expand your Zigbee mesh network. Only compatible with motors with mechanical limit switch detection Not compatible with motors with electronic limit switch detection.

Installation [→Figure A]

Thanks to its compact size, this product can be installed in a junction box or behind the wall switch controlling the motorized product.

In detail [→Figure B]

Each terminal can accept a cable of 2.5 mm² maximum, stripped of 8 mm.
$.In detail \[→Figure B\]$

Wiring with switch [→Figure C]

Switch off the power supply.
Disassemble the wired wall switch controlling the motorized product to be connected.
Wire IZYMO MOTOR RECEIVER Zigbee according to the diagram.
Reassemble the wired wall switch.
Turn the power back on

Wiring without switch [→Figure D

Switch off the power supply.
Wire IZYMO MOTOR RECEIVER Zigbee according to the diagram.
Turn the power back on.

$Wiring without switch \[→Figure D\]$

Input Neutral
Input Line
Input terminal for the wired switch “up”
Input terminal for the wired switch “down”
Motor output terminal “up”
Motor output terminal “down”

*Wired switch optional

Auto-detection of switch type

After turning the power supply on, do a single push on the wired wall switch to bring the motorized product half-height. IZYMO
MOTOR RECEIVER Zigbee has an autodetection system to automatically detect the type of wired wall switch (toggle switch or push-button) wired at the input. Note: To perform a new auto-detection,
IZYMO MOTOR RECEIVER Zigbee must be manually reset (see 8. Reset to original configuration).

Calibration [→Figure E]

IZYMO MOTOR RECEIVER Zigbee must be power supplied.
– Do 5 short presses on the Press button.
Note: The Led blinks green, meaning the calibration has well started.

Pairing to TaHoma switch [→Figure F]

IZYMO MOTOR RECEIVER Zigbee must be power supplied.
1)Briefly press twice the IZYMO MOTOR RECEIVER Zigbee Press button: the LED blinks orange.
2)On the Tahoma application home page, select ****, choose Windows and sun protection, then Somfy, and then select the type of motorized product to be controlled.
3)Follow the instructions in the application to complete the configurations.

$Pairing to TaHoma switch \[→Figure F\]$

Tips: It is recommanded to perform the set up of the receiver within 15 feet (4.5 meters) of a Zigbee Router.

Unpairing

IZYMO MOTOR RECEIVER Zigbee must be power supplied and paired.

On the Tahoma application home page, select the receiver to be unpaired.
Follow the instructions in the application to remove the receiver from Tahoma.

Reset to original configuration [→Figure G]

IZYMO MOTOR RECEIVER Zigbee must be power supplied.

Press more than 5 seconds on the IZYMO MOTOR RECEIVER Zigbee Press button: the LED blinks orange.
Press once again the Press button (short press) to confirm the reset. If the reset is correct, the LED blinks alternatively in red and green and blinks alternatively in orange. Start again if necessary.
IZYMO MOTOR RECEIVER Zigbee has now its original settings.

Tips: It is recommanded to perform the reset of the receiver within 15 feet(4.5 meters) of a Zigbee Router
Note: To remove the receiver from
Tahoma, see 7.Unpairing.

$Reset to original configuration \[→Figure G\]$
$Reset to original configuration \[→Figure G\]$

Technical data

Power supply	110V – 230V AC on 50Hz/60Hz
Switching capabilities	110 V – 230V AC – 3A
Consumption	< 1W

Maximum motor power
List of compatible motors available on www.somfy.com.| 280W Max – 60 Nm Max (230V) 140W Max – 30 Nm Max (110V) Integrated zero crossing
RF protocol| Zigbee 3.0
Radio frequency range| 2.4 GHz
Max output power| +11 dBm
Range| up to 40 m indoors
Operational temperature| -4°F to 122°F (-20°C to 50°C)
Device ID Type| Window Covering Device (0x0202)

We care about our environment. Do not dispose of the appliance with usual household waste. Give it to an approved collection point for recycling.

IZYMO™ MOTOR RECEIVER ZIGBEE 1871259A

FCC ID: DWNIZYMO-MOTOR

This device complies with Part 15 of the FCC Rules/ Innovation, Science and Economic Development Canada’s license exempt RSS(s).Operation is subject to the following two conditions: (l)this device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could avoid the user’s authority to operate the equipment.

This equipment has been tested, found to comply with the limits for a Class B digital device, pursuant to part l5 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. Th~ equipment generates uses and can radiate radio frequency energy and, n not installed and used in accordance with the instruction~ may cause harmful interference to radio communications. However, there is no guarantee that interference will not oca.ir in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by taming the equipment off and on, the user ~ encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

MPE REMINDING

To satisfy FCC/ ISED RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended.

Suppliers Name: Somfy Systems Inc.
Suppliers Address (USA): 121 Harrod Blvd, Dayton, NJ 0881 0, United States of America
Suppliers Website: https://www.somfysystems.com/en-us/contact-us